Only show results available in Virginia? Ok

glass industry Applications

  • Premium

    Glass sorting for the glass recycling industry

    Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colors.

    By REDWAVE - a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Thermal oxidation for the glass industry

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring for glass manufacturing industries

    Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and others.

    By Opsis AB based in Furulund, SWEDEN.

  • PET Recycling (Blown Bottles)

    The area of PET bottle recycling is characterised by very high wear and tear on the machines. Frequent blade changes, high energy costs, poor accessibility and thus long downtimes – these are the substantial problems with which recycling firms struggle to increase the cost effectiveness of their systems. With the CentriCut from Nuga Systems these problems are a thing of the past. Optimal access is guaranteed thanks to the very compact design of the CentriCut. Energy costs are 50% lower due to the innovative operating principle. The special carbide cutting inserts guarantee long blade life and in addition a very quick blade change. This reduces the CentriCut downtime above the average and increases the system integrity of the entire system.

    By Nuga Systems AG based in Balgach, SWITZERLAND.

  • Combustion gas analysis for the glass industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Applications and Air Pollutants Removed in the Ceramics and Glass Industry

    Removal of particulate, acid gases and NOx emissions from glass furnaces. Particulate control on glass and ceramic material dryers and furnaces.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their different atomic densities, and analysing the data from the X-Rays using a bi-chromatic sensor system. X-TRACT is the first industrial application for any dry mechanical density sorting.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Shredding and baling for the glass/rock and mineral wool industry

    Complete waste handling installations containing conveyors,shredders and specialized balers for waste handling of waste matts of glasswool. Large size straight from production lines.

    By Valvan Baling Systems NV based in Menen, BELGIUM.

  • Premium

    Application package FLUXANA RAW- Glass

    This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package raw materials can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 6x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Application package FLUXANA Glass

    This application package is a 'ready to go' calibration kit for xrf instruments. In the glass industry, raw materials have to be analysed together with the quality control samples from production. FLUXANA has created two basic programs Raw Materials (CS-0022) and Glass (CS-0016) for these two purposes, which can be individually adapted by the customer. The application package glass can, for example, contain: - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Specialty Cleaners and Lubricants for Electronics Industry

    Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items.  They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals.  When rinsed properly our products leave absolutely no residue.  They are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Waste gas treatment for the TFT industry

    Manufacturing TFT/LCD displays requires waste gas treatment as well. Processes that produce large scale Thinfilm Transistors (TFT) on glass substrates, for instance, use Chemical Vapour Deposition – CVD – to separate the thin films onto the material. The process requires cleaning the process chamber periodically and usually employs etching with NF3. Etching of the separated thin films typically utilises CF4, SF6 and chlorinated gases, which release large amounts of waste gas mixtures.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Premium

    Waste sorting solutions for the packaging industry

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Material handling equipment for nonmetallic mineral industry

    Brick and Structural Clay Tile Manufacturing, Glass and Glass Product Manufacturing, Cement Manufacturing, Ready-Mix Concrete Manufacturing, Concrete Pipe, Brick, and Block Manufacturing, Other Concrete Product Manufacturing, Lime Manufacturing, Gypsum Product Manufacturing, Ground or Treated Mineral and Earth Manufacturing, Mineral Wool Manufacturing.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Applications and Air Pollutants Removed in the Fiber Optic Industry

    Emissions of silicon tetrafluoride, hydrochloric acid, hydrofluoric acid, chlorine from silica glass manufacturing and coating. Emergency scrubbing. Drawing Tower off-gas emissions. High temperature emissions of particulate and acid gases from furnaces. Hydrochloric acid recovery and re-concentration.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Metal detection for in the Recycling Industry

    Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Eriez metal detectors have varied applications in large array of industries from aggregates to recycling, ceramic to food, mineral processing to glass, plastics and rubber to packaging. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you