Only show results available in Virginia? Ok

glass processing Applications

  • Combustion gas analysis for the glass industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Metal Sorting - Electronic Scrap Sorting

    The recycling of disused and obsolete electrical and electronic equipment is gaining more and more importance world-wide. Waste electrical equipment is an incredibly rewarding source of raw materials. In Waste electrical equipment, up to hundreds of times more precious metals can be found per ton of material than in the primary source of raw material, ore. The goal for TITECH and the industry as a whole is to utilise electronic scrap recycling and sort out pollutants on one hand and profitable components in high purity on the other. For electronic recycling purposes, the EU classifies W??? into 10 categories. After separate collection of TVs, fridges and so on, they are processed and sorted in electronic scrap recycling systems. The average content of thus gained materials is as follows: metals (50%), plastics (30%), glass (10%) and other materials (10%).

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Specialty Cleaners and Lubricants for Solar Industry

    IPC manufactures specialty detergents for solar panel cleaning applications.  Our products remove slurry, partihttp://www.ipcol.com/images/solar.gifculates, oil, and organic debris from solar panels both during the manufacturing process and in the field. Our products are excellent glass cleaners and are designed to clean delicate surfaces without leaving any interfering residues after rinsing. They are safe for use on glass, metal, plastic, and many other surfaces. For most applications a 0.5% - 1.0% solution is effective.  Contact us today for a sample of our solar panel cleaners.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Metal detection for in the Recycling Industry

    Eriez manufactures the broadest range of metal detectors in the industry. Whether looking for small ferrous or nonferrous metal pieces, tramp metal or digger teeth, we can provide you with a metal detector to solve practically every metal contamination problem. Eriez metal detectors have varied applications in large array of industries from aggregates to recycling, ceramic to food, mineral processing to glass, plastics and rubber to packaging. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Anaerobic Digester for Biogas Plant

    Glass fused to steel tank is made by a special process, called vitreous enamel coating ,which is an advanced technology for anti-corrosion purpose of steel plate. Tanks are coated both inside and outside with enamel .Today, glass fused to steel tank is widely used in wastewater treatment projects as aerobic and anaerobic reactors of UASB,EGSB,SBR,BAF,USR,CSTR, and equalization tank, clarifier, and sludge holding tank. It has proven its superior resistance to thermal and chemical when facing water with extremes in pH and temperature.

    By Center Enamel Co,.Ltd based in Guangzhou, CHINA.

  • Waste gas treatment for the TFT industry

    Manufacturing TFT/LCD displays requires waste gas treatment as well. Processes that produce large scale Thinfilm Transistors (TFT) on glass substrates, for instance, use Chemical Vapour Deposition – CVD – to separate the thin films onto the material. The process requires cleaning the process chamber periodically and usually employs etching with NF3. Etching of the separated thin films typically utilises CF4, SF6 and chlorinated gases, which release large amounts of waste gas mixtures.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Refuse Derived Fuel (RDF) & Solid Recovered Fuel (SRF)

    A full-scale Gasplasma® plant can make its own RDF from MSW/Commercial Waste. The waste is brought directly into a fuel preparation hall at the front of the building. Inside the fuel preparation hall there is industry standard equipment that can recover glass, metals and hard plastics from the wastes for recycling. The remaining waste is then dried and shredded to make a Refuse Derived Fuel (RDF) for the Gasplasma® energy from waste process. Clients who already produce RDF may not require a fuel preparation hall. APP can design a plant without this facility, accepting the RDF directly from the client. Secondary Recovered Fuel or Solid Recovered Fuel (SRF) is often confused with Refuse Derived Fuel because they are similar in nature. However, SRF is produced to reach a clearly defined standard such as CEN/343 ANAS whereas RDF is not.

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Crusher for Dolomite Industries

    Dolomite is used as an ornamental stone, a concrete aggregate, a source of magnesium oxide and in the Pidgeon process for the production of magnesium. It is an important petroleum reservoir rock, and serves as the host rock for large strata-bound Mississippi Valley-Type (MVT) ore deposits of base metals such as lead, zinc, and copper. Where calcite limestone is uncommon or too costly, dolomite is sometimes used in its place as a flux for the smelting of iron and steel. Large quantities of processed dolomite are used in the production of float glass. As for its wide usage, DSMAC manufacture the high quality dolomite crusher which can meet your requirements.

    By DSMAC Group based in Zhengzhou, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you