glassware Applications | Environmental XPRT

Premium

Evaporators and concentrators for glass

Effluent from grinding processes, effluent from coloring processes.

By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

Premium

Thermal oxidation for the glass industry

By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

Premium

Combustion gas analysis for the glass industry

Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required.

By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

Waste recovery for glass manufacturing

Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence...

By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

Solutions for fiberglass manhole covers and frames

Fiberglass Manhole Covers offer a great alternative to traditional heavy cast iron manholes; ZERO SCRAP VALUE for the would be thieves. Fully Traffic Rated Check This Out - Hand Drawn Red. Non Conductive. Non Corrosive. 30 Year + Minimum Lifespan. 1/4 Turn Lock Keeps the Vandals Out. Quality Stainless Steel Lock. Sewer, Wastewater, Water, Gas, Electric, Telco. Perfect for AMR, Radio Read, SCADA, Telemetry and Data Acquisition.

By Aqua Technology Group based in West Chester, OHIO (USA).

Premium

Infrared temperature measurement for glass industry

Precision temperature measurements are critical to the glass-making process. We supply a range of advanced solutions designed specifically for the glass industry, meeting the highest standards of quality and reliability. Glass is used for a variety of purposes, and can be shaped, toughened, coloured, laminated or treated to suit specific requirements. Our measurement systems provide accurate temperature monitoring to support these applications.

By AMETEK Land based in Dronfield, UNITED KINGDOM.

Premium

Continuous emissions monitoring for glass manufacturing industries

Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and others.

By Opsis AB based in Furulund, SWEDEN.

Environmental monitoring solution for glass manufacturing areas

Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Premium

Glass sorting for the glass recycling industry

Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colours.

By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

Dust & oil mist collection for the fiberglass industry

By ProVent, LLC based in Harbor Springs, MICHIGAN (USA).

Measurement solution for glass wool insulation manufacture

The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process "green".

By Protea Limited based in Middlewich, UNITED KINGDOM.

Applications and Air Pollutants Removed in the Ceramics and Glass Industry

Removal of particulate, acid gases and NOx emissions from glass furnaces. Particulate control on glass and ceramic material dryers and furnaces.

By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Premium

On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works

By ENVEA based in Poissy, FRANCE.

Premium

Metals separation equipments for cleaning metal pollutants for glass industry

REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from glass.

By Regulator-Cetrisa based in Gava, SPAIN.

Premium

Capabilities of the Adsorbent Tube Injector System (ATIS™)

The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

Premium

Specialty Cleaners and Lubricants for Nuclear Industry

Our mild yet powerful multi-purpose cleaners are effective in both industrial and critical cleaning applications. Their unique formulation of chelants, ionic, and non-ionic ingredients produce a variety of cleaning actions that include lifting, dispersing, emulsifying, sequestering, suspending and decomposing. They are outstanding for cleaning labware, ceramics, and stainless steel. Our detergents can replace hazardous cleaning agents used to remove radioactive...

By International Products Corporation based in Burlington, NEW JERSEY (USA).

Capabilities of the Adsorbent Tube Injector System (ATIS™)

The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is construct...

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

Subscribe to our eBulletins

Add Supplier Profile