Only show results available in Virginia? Ok

granulation technology Applications

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Hospital Waste

    Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Aerosol and particle technology for operational safety industries

    During the production, the conveyance and the filling of solid particles in the form of powders, bulk materials, granulates, pellets and many other shapes, dust is generated as a rule. This dust formation can lead to an impairment of the operational safety and the reliability of the production process, e. g. by means of inhalable dust fractions. The workplace hygiene can also be endangered, e. g. through dust accumulations.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Rubber and Tyres

    Our shredding systems generate granulate from the hardest rubber and old tyre applications for your recycling plant. Regardless of whether you want to use the granulate for pyrolysis, hydrolysis or combustion, we will customize it to exactly fit your needs. Regardless of whether rubber accumulates in the form of tyres, conveyor belts, rubberised chains or as production waste, recycling is economically efficient and makes sense from an environmental perspective. Very powerful shredders are required to recover recyclable materials from rubber waste and old tyres. Our proven and reliable 4-shaft technology is particularly suited in this regard. This system economically performs the pre- and re-shredding in just one step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Residual Timber Utilization

    Our reliable wood shredders ensure the production of a homogeneous granulate for your in-house wood chip furnace, biogas plant, biomass co-generation plant and also the production of wood briquettes. Regardless of how you are planning to use the wood chips, we will configure the wood shredder exactly according to your needs. We offer you a large selection of wood shredders with various working widths, rotor diameters and drive capacities. The possible granulate sizes usually range from 12 to 80 mm. Regardless of whether you need a compact, small system or have specific needs, we will always find the right solution for you! Capitalize on our reliability! We provide a 3 year carefree warranty on all our UNTHA wood shredders.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Mixers, dryers, innovative solutions for chemical industry

    We offer excellent process engineering solutions for the chemical industry in the fields of mixing, drying, evaporating, reacting, and granulating. Our ultimate goal is the satisfaction of our customers and a collaborative long-term partnership. The most up-to-date machines are at your disposal at our technology center in Herrsching, where you can carry out series of tests. Following delivery of the equipment, we support you from installation to commissioning and trial operation and assist you with maintenance and service tasks.

    By AVA - Huep GmbH u. Co. KG based in Herrsching, GERMANY.

  • Premium

    Industrial shredders system for destroys data shredding inddustry

    It is imperative confidential data, in the form of paper or computer hard drives, remains confidential – forever. Any reconstruction must be impossible – to preserve confidence or to fulfill statutory provisions. In this field WEIMA is your partner of trust!  In order to select the optimum model and rotor for your application an indepth discussion is essential to establish the correct application of shredding technology. WEIMA shredders process all kinds of files: documents, treasury notes, swipe cards, information on Compact Discs, DVD’s, hard drives, footage or tape. Depending on security level or granulate size, the material can be shredded in a single-stage or two-stage process.

    By WEIMA based in Ilsfeld, GERMANY.

  • Independent particle characterization services for medical devices industries

    Advances in biomedical implant and device technology continue to present new challenges in the area of physical testing. Particle Size Distribution, Surface Area and Porosity measurement data are invaluable to the biomedical researcher. PTL partners with each client to design projects that provide this needed information while controlling the costs of research. Applications have included particle size analysis of wear particles in fluid submitted from implant fatigue studies and pore size analysis of tricalcium phosphate granules compressed into bone grafting media. Evaluation by photomicroscopy and mercury porosimetry of artifical ligament materials have provided insight to researchers on their products.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you