Only show results available in Virginia? Ok

granulator Applications

  • Premium

    Water treatment solutions for metering of solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Recycling of Plastic

    For the recycling of plastic we offer a wide range of solutions:shredding, separation, granulating , cleaning , extruding.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Balers and compactor solutions for expanded plastic industry

    You can compact or granulate these high valuable waste fractions that are found in various applications.

    By Bramidan Balers based in Bramming, DENMARK.

  • Premium

    Recycling equipments for shredding industrial plastics

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete processing of the material for re-use.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Plastics & textile shredding

    SSI manufactures a variety of low-speed, high-torque 1, 2 and 4-shaft shredders specially suited for size reduction of plastics and textiles. SSI has many shredders installed in plastic processing applications ahead of granulators to downsize bulky, difficult to manage or compressible materials before additional processing and recycling. We also have many shredders employed converting plastic materials into usable fuel sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Recycling equipments for tire shredding and recycling

    Granutech Saturn Systems offers a complete line of tire shredding, granulating and powderizing equipment designed to process scrap tires for recycling and repurposing. With over 40 years of experience developing machinery to provide high quality rubber from scrap tires, Granutech Tire Shredders provide cost-effective options for shredding tires, separating rubber from steel and generating granulated or powderized rubber for recycling operations. Our staff has decades of experience in the scrap tire industry, and we’ll make sure that the equipment we provide you will meet your specific recycling requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Reliable Shredding Technology for Rubber and Tyres

    Our shredding systems generate granulate from the hardest rubber and old tyre applications for your recycling plant. Regardless of whether you want to use the granulate for pyrolysis, hydrolysis or combustion, we will customize it to exactly fit your needs. Regardless of whether rubber accumulates in the form of tyres, conveyor belts, rubberised chains or as production waste, recycling is economically efficient and makes sense from an environmental perspective. Very powerful shredders are required to recover recyclable materials from rubber waste and old tyres. Our proven and reliable 4-shaft technology is particularly suited in this regard. This system economically performs the pre- and re-shredding in just one step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Hospital Waste

    Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Shredders for Tires and Rubber Treatment

    By the activity of tires recycling are obtained rubber granuls and rubber powder. Through the shredding and granulating, the rubber waste is reduced to the appropriate size to allow the re-use.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Containers for solid hazardous materials

    Bins for disposal of solid materials harmful to the environment such as cleaning rags and wipes, paints, granulates, binders for oil and chemical spills.

    By P. Henkel GmbH based in Kreuztal, GERMANY.

  • Premium

    Precision moisture analysis instruments for rapid moisture and ash testing for pharmaceuticals

    Accurate results for tablets, granulations, and lyophilized samples. Accurate moisture control in pharmaceuticals is critical to maximize shelf life, tableting performance, and API effectiveness. When it comes to moisture, trust Computrac, the leader in the field for over 30 years. The Computrac line of moisture, solids and ash analyzers is precise enough for the lab, rugged enough for the production floor, and flexible enough to handle nearly any application.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Shredding Technology for Refuse Derived Fuels (RDF) - Energy

    RDF raw material is a mixture of many different materials, so it has a strict request on machine long-term performance stability and blade anti-corrosion characteristics to shred both hard and soft materials such as plastic etc. Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Dry bulk material processing for the plastic industry

    Over the years, plastics have become the most dominant engineering material for most products.  All plastics are polymers; these polymers are further divided into two basic types: thermoplastics and thermosets. Extrusion can be used for thermoplastics. The raw material is in the form of pellets, granules, or powder. Meyer rotary valves are designed and engineered for dependable and reliable performance. The precision-engineered housing and rotor prevent material from getting jammed or sheared.

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA).

  • Premium

    Recycling equipments for tyre recycling

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants and cement ovens or for equestrian (i.e. rubber mixed with sand or sawdust used in the horse industry as ground in the stable or at the tracks). Rubber granulate is reused in e.g. sports fields, artificial turfs, rubber mats and moulded products. Rubber powder can be reused in rubber paved asphalt. The recovered steel can be smelted and reused just like non-recovered steel. Finally, the liberated textile has a very high effective burning value and can therefore be mixed with other materials in order to increase that material’s effective burning value. Read more: http://eldan-recycling.com/en/tyre-recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you