greenhouse gas monitoring Applications
-
PremiumGas analysis & monitoring system for greenhouse gases analysis
The rising levels of manmade greenhouse gases (GHGs) in the atmosphere and their resulting impact on climate is now one of the single biggest technological and environmental challenges facing the world. This makes intensified monitoring of these gases more critical than ever in order to better quantify the role of the numerous natural and manmade sources, sinks and buffers involved in the cycles of GHGs. It also enables us to objectively audit GHG fluxes at the factory, city, country and continental level. Such objective auditing is ultimately essential to facilitate effective enforcement and compliance with any regulations, laws, treaties and trading agreements based on GHG metrics such as carbon footprints.
By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.
-
Greenhouse gas monitoring for regulations and compliance consultancy
Kurz thermal mass flow meters exceed the certification levels required by the Mandatory GHG Reporting regulation and are approved for these applications.
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
PremiumGas monitoring instruments and systems for greenhouse gas emissions from soil
Measurement of greenhouse gases released from soil and water surface forms an important part of climate change study. Microbial activity in the soil or for instance the melting of permafrost releases greenhouse gases such as Methane and nitrous oxide N2O into the atmosphere. Measurement of the concentration for these gases inside an open-bottom soil chamber placed on the soil over time tells the emission rate (flux) per chamber footprint area.
By Gasmet Technologies Oy based in Helsinki, FINLAND.
-
Measurement solution for soil chamber gas flux
Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem.
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Environmental monitoring solution for fertilizer plants
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Environmental monitoring solution for mineral processing
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Premium
Fluoride emissions monitoring in aluminum smelters
Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions during the electrolytic process phase to the atmosphere. The gas emissions need to be monitored. Typically the smelters have emission limit values (ELVs) for sulfur dioxide and hydrogen fluoride emissions. These emissions should be measured accurately and with good precision, to ensure the smelter does not exceed its emission limit values. In addition several fluoride compounds may be produced in the electrolytic bath in the event of an oxygen shortage. These compounds include carbon tetrafluoride CF4, hexafluoroethane C2F6, sulfur hexafluoride SF6, and silicon tetrafluoride SiF4. These additional emission components are problematic, as they have high Global Warming Potential (GWP) values. The GWP is a relative measure designed to demonstrate how much heat a greenhouse gas (GHG) traps in the atmosphere. Emission of one kilogram of carbon tetrafluoride into the atmosphere today has the potential of heating the atmosphere as much as 7,000 kilograms of carbon dioxide over the next 100 years.
By Gasmet Technologies Oy based in Helsinki, FINLAND.
-
NDIR Carbon Dioxide (CO2) Monitoring
By LED Microsensor NT based in Saint-Petersburg, RUSSIA.
-
Environmental monitoring solution for aluminium industry
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Environmental monitoring solution for pulp & paper
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Environmental monitoring solution for sulfuric acid plants
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Environmental monitoring solution for cement industry
By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.
-
Measurement solution for Perflurocarbon (PFC) emissions from aluminium industry
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale cell.
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Environmental data managament & compliance reporting for the manufacturing industry
Environmental data allows organizations to manage and monitor their compliance with greenhouse gas regulations, the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and many others. Additionally, many companies must generate and report environmental data to uphold permits which allow them to conduct their business.
By enVirSys LLC. based in Littleton, COLORADO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you