Only show results available in Virginia? Ok

groundwater remediation industry Applications

  • Premium

    In-Situ Groundwater Remediation for the Site Remediation Industry

    In-situ groundwater remediation method is based on injection of Fe(0) nanoparticles through application wells directly into the contaminated water. nZVI injection is very fast, reaching significantly lower operating costs compared to commonly used remediation methods (expensive construction of reactive barriers, building of pump&treat stations, excavation of contaminated soil etc.). In comparison to other in-situ technologies a far lower quantities of injected chemical is needed due to high efficiency of the product and thus the time and cost of remediation is reduced.

    By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.

  • Groundwater Monitoring for Remediation

    Many fresh water sources have been degraded to toxic levels by the inclusion of industrial, agricultural, and human waste products that have been discharged into the closest body of water, accidentally or deliberately for many years.

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA).

  • Premium

    Remediation solutions for soil & water remediation industry

    Carus Corporation has been an active participant in the remediation industry since the late 1990s. Our Carus Remediation Technologies (CRT) team is dedicated to the support and growth ofin situchemical oxidation (ISCO), bioremediation and other emerging technologies.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Rock excavation for the soil remediation industry

    If your job includes recycling contaminated hazardous material, a Vermeer T1255 Terrain Leveler SEM may offer a cost-efficient alternative to other remediation technologies.

    By Vermeer based in Pella, IOWA (USA).

  • Air pollution control for the soil remediation industry

    Treatment of exhaust gases from systems that process polluted or contaminated soil – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Air pollution control for the remediation industry

    Thermal and catalytic oxidizers are one of the primary vapor treatment technologies used in purifying harmful compounds from contaminated groundwater or soil.  Global Technologies is the remediation division of Anguil Environmental Systems focused on treating emissions that are extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Horizontal Remediation Well Systems

    Horizontal wells are a proven and effective remedial technology for site cleanup. For environmental applications, horizontal wells offer several advantages in comparison to traditional vertical wells. The first horizontal wells were installed using a mid-sized directional drill rig in 1993 by Directional Technologies, Inc. The three (3) horizontal Soil Vapor Extraction wells installed at John F. Kennedy International Airport was the beginning of a new industry. Directional Technologies, Inc. founders transferred their experience from the oil fields to the environmental industry. This has resulted in the installation of over 1,000 horizontal wells for site remediation worldwide. Horizontal Remediation Wells are a time-tested and proven technology that can provide solutions for problems previously considered unfeasible. Interested in learning more about this remedial technology, visit us at for case studies and more.

    By Directional Technologies, Inc. based in Miramar Beach, FLORIDA (USA).

  • Air pollution control for soil remediation

    Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA).

  • Soil and Groundwater treatment solutions for bioremediation industry

    Today bioremediation is successfully used as soil– and groundwater remediation technology. Many bioremediation systems, both in-situ as ex-situ techniques, usually result in considerable cost savings. Since the beginning of the 1980’s both in-situ and ex-situ bioremediation projects have been successfully completed worldwide through the use of preselected and adapted bacteria. QM Environmental Services supplies a range of microbial, bioactivator and nutrient products and gas delivery systems for the use in both aerobic and anaerobic bioremediation programs. Most common contaminants ranging from aliphatic hydrocarbons such as petroleum, lubrication oils, aromatic compounds like benzene and toluene to chlorinated solvents can be treated with these products.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

  • Premium

    Measurement of naphthalene in ambient air to monitor workplace exposure limits & at remediation & Superfund sites

    The Series 8900 Naphthalene Analyzer provides direct measurement of Naphthalene in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits and at remediation and Superfund sites. The Series 8900 Naphthalene Analyzer employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Naphthalene and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Naphthalene is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON - Baseline based in Lyons, COLORADO (USA).

  • Oil skimmers for montoring wells industry

    Ambar manufactures a specific oil skimmer for sub surface remediation where oil needs to be removed from ground water monitoring wells.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Premium

    Water Treatment in Soil and Groundwater Contamination

    Several industries and industrial processes may contribute to soil and groundwater contamination. AdEdge Technologies has supplied filtration equipment for several remediation efforts to remove arsenic, lead, and other inorganic contaminants to meet state and federal mandates.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Microbial Solutions for Soil Bioremediation

    The remediation of soils, sludge, and water require more than just the addition of packaged microbes.  Microbial Discovery Group can assist you in applying a total systems approach to soil bioremediation. Here in the US, sometimes we take for granted how precious it is to have non-contaminated soils and water. In many countries, industrial pollution has destroyed the soil and water ecosystems leading to toxic concerns and poor health. We at Microbial Discovery Group believe the remediation of soils, sludge and water require more than just the addition of packaged microbes. Applying a total systems approach to soil and water remediation has to be the primary focus of your bioaugmentation program. We are here to help you in that process. Lucky for us, many of the recalcitrant pollutants in the environment will serve as food sources to microbes.  By taking advantage of using natural processes to clean up contaminated sites, MDG provides solutions by speeding up the biodegradation of harmful chemicals. By rebalancing the system with the proper microbial processes, chemical breakdown will go from years to weeks.  Let MDG work with you to start cleaning up the world, one site at a time.

    By Microbial Discovery Group (MDG) based in Franklin, WISCONSIN (USA).

  • Premium

    Sampling and drilling equipments for the mining industry

    AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and monitoring well installations.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Sulfide Oxidation with Hydrogen Peroxide (H2O2)

    Sulfide Odor Control Sulfide is found throughout the environment as a result of both natural and industrial processes. Most sulfide found in nature was produced biologically (under anaerobic conditions) and occurs as free hydrogen sulfide (H2S) - characterized by its rotten egg odor. We are most likely to encounter biogenic H2S in sour groundwaters, swamps and marshes, natural gas deposits, and sewage collection/treatment systems. Manmade sources of H2S typically occur as a result of natural materials containing sulfur (e.g., coal, gas and oil) being refined into industrial products. For a variety of reasons - aesthetics (odor control), health (toxicity), ecological (oxygen depletion in receiving waters), and economic (corrosion of equipment and infrastructure) - sulfide laden wastewaters must be handled carefully and remediated before they can be released to the environment. Typical discharge limits for sulfide are < 1 mg/L. Sulfide Treatment Alternatives There are dozens of alternatives for treating sulfide laden waters, ranging from simple air stripping (for the low levels present in groundwaters) to elaborate sulfur recovery plants (used to treat several tons per day at refineries and coal burning power plants). There are processes based on biology (using compost filters, scrubbing media, or inhibition/disinfection), chemistry (oxidation, precipitation, absorption, and combination), and physics (adsorption, volatilization, and incineration). Each process occupies a niche which is often defined by the scale and continuity of treatment, whether the sulfide is in solution or is a gas, the concentration of sulfide involved, and the disposition of the sulfide containing medium. However, for reasons relating to convenience and flexibility, chemical oxidation (using hydrogen peroxide) continues to grow in its scope of application. Treatment with Hydrogen Peroxide While other peroxygens such as permonosulfuric (Caro’s) acid, peracetic acid, and persulfates will oxidize sulfide, their use for this application is overkill. Hydrogen peroxide (H2O2) is considerably simpler and more cost-effective. H2O2 may control sulfides in two ways, depending on the application: Prevention - by providing dissolved oxygen which inhibits the septic conditions which lead to biological sulfide formation; and Destruction - by oxidizing sulfide to elemental sulfur or sulfate ion.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you