Only show results available in Virginia? Ok

hard water Applications

  • Phosphonate Testing in Hard Water

    Testing phosphonates in hard water can be difficult due to interference from high levels of calcium. Here we present a phosphonate test method for hard water samples. The method is based on a chemical masking of the calcium. The WAT hard water phosphonate test uses C30 Spectrophotometer to measure the chromogen PMB and digital thermoreactor to digest the phosphonate compound. The thermoreactor capacity of 16 simultaneous vials provides for running critical data quality assurance samples.

    By WAT Australia Pty.Ltd. based in West Australia, AUSTRALIA.

  • Liquid Rock - Prevening Scale Formation from Ground Water Hardness

    Groundwater is in contact with soil and rock minerals. Significant amounts of the minerals are dissolved in the groundwater. Elevated water hardness is the result of the water interaction and partial dissolution of carbonate minerals. Scale formation is a crystallisation process. Crystals are a highly organised arrangement of molecules. The determining circumstances for a successful crystallisation event include concentration, temperature, pressure and chemical environment. Suitable conditions for the formation...

    By WAT Australia Pty.Ltd. based in West Australia, AUSTRALIA.

  • Water compliance

    In most companies today, managers are overwhelmed with poorly organized, de-centralized data and are still making decisions by reacting to historical results driven by non-standardized processes and guessing about the future. Highly customized spreadsheets, manual extracts from hard to use ERP systems, “cut & paste” reporting…sound familiar?

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Industrial water softening

    The presence of certain metal ions in water causes a variety of problems. These ions interfere with the action of soaps, lead to build up of limescale, which can foul plumbing, boilers, heating equipment. Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water extends the lifetime of plumbing and heating equipment. Softening of low TDS ( Total Dissolved Solids ) water is done commonly with a Strong Acid Cation ( SAC ) exchange resin operating...

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Water treatment solutions for the Drinking water & water reuse sector

    Water scarcity and the cost of water treatment has caused an increasing interest on water reuse for municipal and industrial reuse. Water treatment require mechanical filtration such as sand and anthracite filters to retain the particles that cause turbidity. Occasionally it is also necessary to reduce water hardness through ionic exchange or the adsortion of contaminants through the use of activated carbon. Our pressure vessels are suitable for any of type of filter media: sand, anthracite, silex, ionic...

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant& design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and thus...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Water treatment solutions for the desalination

    Our Filters are Highly Resistant to Corrosivity. Reverse osmosis is one of the most widely applied desalination technologies. Previous to the process of separtion of water from salt and minerals, seawater or brackish wter requires the elimination of large size particles in order to assure a good performance of reverse osmosis membranes. Our sand filters facilitate the removal of these suspended solids to avoid membrane fouling. In addition, after reverse osmosis process, water has to be remineralized through...

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Industrial water Nickel Laterite

    Lateritic nickel ore deposits are surficial, weathered rinds formed on ultramafic rocks. Nickel laterites are a very important type of nickel ore deposit, they comprise 73% of the continental world nickel resources. They are growing to become the most important source of nickel metal for world demand. Nickel is a hard, silver white metal that has industrial applications related to its strength, corrosion resistance, high ductility, good thermal and electrical conductivity and catalytic properties. Its primary...

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Ammonia & Arsenic removal from water

    Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin...

    By PuriTech Ltd based in Herentals, BELGIUM.

  • EDI Solutions

    QUA’s FEDI® (Fractional EDI) stacks have superior hardness tolerance compared to the other EDI products on the market. With a dual voltage process this allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant's design economics and reliability. FEDI stacks are available in three different models which can be applied either for higher hardness tolerance or high water flow rates. MEGA FEDI stacks are ideal for large capacity, high flow...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Industrial water Nickel & Cobalt purification

    Cobalt is a brittle, hard transition metal with magnetic properties similar to iron. It is mainly used as an alloy with iron, nickel or other metals to produce corrosion and wear resistant products for high temperature applications (such as jet engines, gas turbines, etc.). Cobalt is normally produced as a by-product of nickel or copper mining. The purity requirements for Cobalt do not allow nickel to exceed a concentration 0.1%. Earlier, the nickel was removed by lime precipitations, but as the market specifica...

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Monitoring surface water for wastewater treatment industry

    Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be taken

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • FEDI - Electrodeionization

    The Fractional Electrodeionization (FEDI) process is an advancement of conventional EDI. The patented dual voltage process allows for a higher flexibility and tolerance to inlet water conditions, thus lowering the risk of scaling, and improving the plant’s design economics and reliability. By incorporating a two-stage separation process with different voltages the FEDI® process is able to: Achieve a higher hardness tolerance by having distinctly different concentrate chambers with separate reject streams and...

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Pumps and Wells

    Operational efficiencies make good sense for business and for resource preservation. To extend the life of wells, gain more production from them, and to safeguard expensive pumps and motors from running dry, companies are retrofitting well pumps with VFDs (Variable Frequency Drives). But even with VFDs, wells are not being optimized to produce the maximum sustainable amount of water and are still running dry resulting in damaging hard stops on pump motors.

    Drive-Chat powered remote access systems...

    By DriveConnect based in Brandon, FLORIDA (USA).

  • Premium

    ADVANCEES - Application : High TDS Reduction

    There are potential health effects caused due to high TDS content in drinking water. The hard water will taste bitter, salty, or metallic and may have unpleasant odors. ADVANCEES can help you to solved this issue. Check out our solution www.advancees.com

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Magnetic Water Conditioning

    Stanford Magnets provide Water Conditioning Magnets that can be installed to water piping to lower the hardness of water.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • REPLACING WATER SOFTENER WITH GREEN SCALEWATCHER WATER CONDITIONER

    Roper’s Restaurant, a cowboy themed restaurant in Albuquerque, New Mexico has replaced its water softener with the computerized, electronic, water-conditioner Scalewatcher from Scalewatcher North America. By installing Scalewatcher, the restaurant has avoided paying the $500 quoted for replacement media for its old water softener and also saved hundreds of dollars a year in salt and water thereby providing Roper’s with a short-term payback on the unit. Roper’s Restaurant, part of Outwest Eateries LLC dba, is...

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Advanced water purification technologies for semiconductor and electronics sector

    High-technology industries use ultrapure water in their manufacturing. SnowPure`s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these systems.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • ALBUQUERQUE RESTAURANT EXCHANGES WATER SOFTENER FOR GREEN SCALEWATCHER WATER CONDITIONER

    Zorba’s Fine Greek Restaurant in Albuquerque, New Mexico, has saved money on water, maintenance and salt by replacing its water softener with the computerized, electronic, water-conditioner Scalewatcher® from Scalewatcher North America. Three months after installing Scalewatcher, the restaurant was able to remove its bulky water softener but still retain the benefits of soft water. Owned and run by Spiros and Marina Counelis, Zorba’s is not only located in a hard water area but also in a region where water...

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you