Only show results available in Virginia? Ok

hazardous chemical use Applications

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Chemical management software for chemical & specialty chemical industry

    Flexible and intuitive, the ExESS Chemical Management System offers an extended set of functionality, dedicated to optimizing the day-to-day management of chemicals. The chemical manufacturing sector continues to face increasing regulation and compliance measures. Complete visibility is required across the supply chain. As of June 1, 2015, GHS applies to companies manufacturing chemicals in the United States, Canada and globally. Governmental agencies such as OSHA and Health Canada (WHMIS) now require every...

    By Lisam Systems based in Ecaussinnes, BELGIUM.

  • Hazardous and Special Wastes

    Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an...

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Premium

    Seal-Less Chemical Transfer And Metering Pumps

    When pumping hazardous chemicals it is important to use a leak free pump that resists the chemical’s corrosive effects.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • High Pressure Mass Spectrometry for Chemical Threats

    From chemical warfare agents (CWAs), toxic industrial chemicals (TICs), toxic industrial materials (TIMs), precursors, and degradation products to the growing use of unconventional agents, the risk associated with today’s chemical warfare and industrial hazards is more disseminated than ever. These expanding threats require first responders, CBRNE teams and HazMat response units to prepare for the unexpected. The use of advanced handheld analytical technology capable of proactive performance in the hot...

    By 908 Devices Inc. based in Boston, MASSACHUSETTS (USA).

  • Premium

    Analytical and measuring instruments of chemical and petrochemical

    In the chemical field, ICP-AES is used for a broad range of analysis in order to manage trace amounts of hazardous metals in the manufacturing process, manage additive elements essential to the functionality of a product, and manage the environment of the entire factory. Therefore, it is desirable to have a robust, highly stable system able to reliably accept the injection of a broad variety of samples, regardless of the type of solvent (aqueous/organic) or the presence of matrices. It is also important to...

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Air pollution control (APC) equipments for chemical industry

    Sulfur plants, acid plats etc. Chemical industry is important to our modern society, but they also produce large quantities of chemical byproducts. These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue gases.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Gas detection analyzers for chemical & pharmaceutical processes

    Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. Our various lines of hazardous gas monitoring systems benefit the chemical and pharmaceutical industry in the following applications.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Spill containment for warehousing / chemical storage

    The SafeGuards line of hazardous spill containment products are used throughout factory and warehousing operations in applications ranging from drum and tote containment; drip containment; maintenance spill pads; roof leak containment; storm drain blockers; overhead door dikes to small and large volume spill kits.

    By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

  • Integrated real-time gas analysis solution for chemical decontamination industry

    The threat of terror in the form of chemical and biological warfare agents has been a reality globally since March 1995, when the Aum Shinrikyo sect killed 12 people and injured nearly 6,000 by releasing sarin nerve gas in the Tokyo subway system. More recently, the 2001 anthrax attacks in the USA was a wake-up call that the threat is real. Recent outbreaks of H1N1 and SARS posed threats of worldwide epidemics because air travel provides a means for these diseases to spread globally in less than 24 hours. A major...

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • TOC Correlation to BOD or COD

    Challenge: Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) are traditional parameters analyzed in the laboratory to determine organic matter in water and wastewater. Wastewater facility operators need to have constant data to monitor their discharges and optimize treatment processes (biological treatment, chemical dosing, etc). The requirements of BOD and COD analysis prevent them from being implemented as control parameters, however. The BOD five-day analysis time requirement...

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Premium

    On-site chlorine and sodium hypochlorite generation systems for Metallurgical and chemical engineering

    Many metallurgical processes require chlorine gas for refining or purification. Klorigen™ chlorine generation systems alleviate the risk inherent with the usage of large quantities of pressurized chlorine gas in these facilities. Klorigen™ systems produce chlorine gas on-demand and under vacuum, eliminating the storage and use of pressurized chlorine gas and the risks associated with chlorine gas currently facing many metallurgical applications. In addition, Klorigen™ systems produce a 15%...

    By Electrolytic Technologies Systems LLC based in North Miami Beach, FLORIDA (USA).

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact....

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Air pollution control (APC) equipments for pharmaceutical industry

    The pharmaceutical industry worldwide is facing a major challenge. The productions of desired chemicals leaves an amount of by-products, some of them dangerous to both humans and the environment. An incinerator is usually used to deal with the challenge to reduce the volumes of hazardous substances. This process, however, creates sub-micron particles that conventional filter technology cannot handle. By using EnviBAT’s technology for gas cleaning – the best in the industry – such issues can...

    By Envibat AB based in Skellefteå, SWEDEN.

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the drinking-water application of MANTECH’s novel PeCOD® COD-testing system — does what no other...

    By MANTECH Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    GHS compliance

    Transition swiftly and seamlessly from your region`s SDS to the Globally Harmonized (GHS) system for classification of chemicals. Our easy-to-use, webbased GHS Wizard makes it simple for your SDS author to ensure labels and data sheets support safe handling and use of hazardous substances.

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you