An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threat
Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal`s EyeC Gas Thermal Imager for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in mitigating and reducing fugitive emissions of methane gas.
Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.
Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.
Once an archetypal example of manual production, the winery and brewery industries now incorporate sophisticated processes to ensure high quality levels and efficient output. In some cases traditional approaches have simply been scaled up or put under more stringent monitoring, whilst in others innovations such as nitrogen-pressurised canning have been introduced. However, whichever approach has been followed there is also a growing realisation of the gas hazards that are associated with both new and old processes, and the need to protect workers from toxic gas exposure and asphyxiation risks.
By Crowcon Detection Instruments Ltd - a Halma company based in Milton Park, UNITED KINGDOM.
Many industries are involved in coating products with solvent-borne materials and then employing ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the build up of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the production process such as: a sudden or improper amount of coating, a change in ventilation controls or excessive speed. In any of these cases, the concentration of flammable vapor has an opportunity to rise above safe levels, creating a potentially explosive mixture of vapor in air.
An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats
Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.
Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. Our various lines of hazardous gas monitoring systems benefit the chemical and pharmaceutical industry in the following applications.
Safe and future-proof solution
• Salt – Water – Electricity, the only ingredients to produce Neuthox®
• No hazards for storing or using Salt – Water and Neuthox®
• BPR Article 95 listed, biocide product regulation
Chemical free solution
• Safe and toxic free handling
• No handling of hydrochloric acid or sodium chlorite
• No use of gloves, goggles, chemical resistant suit or respirator
• No requirement for gas detection type systems
Cost effective solution
• 4 pence per 10 m3 treated water.
• One DCW system handling both hot & cold installation, possible multiple injection
• Minimum service and maintenance cost
By Danish Clean Water A/S based in Sønderborg, DENMARK.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you