Only show results available in Virginia? Ok

hazardous waste Applications

  • Premium

    Intelligent compliance solutions for retail industry

    Retailers are increasingly challenged with meeting EHS regulatory compliance obligations and an intense consumer demand for safer, more environmentally-friendly products. Nearly every aspect of a retailer`s business is impacted by EHS compliance, which requires knowledge and expertise that is far from a core skill set possessed by most of a retailer`s workforce. From sourcing products, to distribution and logistics, to employees handling regulated products, to the proper disposal of hazardous waste, a...

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Ground penetrating radar (GPR) instruments for Environmental studies industry

    Environmental engineers, consultants and geophysicists can use ImpulseRadar GPR for: Hazardous waste disposal and ground contamination studies. Ground water studies – water content / saltwater intrusion. Landfill delineation. Site investigations and assessment. Underground storage tank and drum investigations.

    By ImpulseRadar based in Malå, SWEDEN.

  • Premium

    Industrial air pollution control for the automotive and vehicle engineering

    Increased mobility and the soaring worldwide demand for cars have opened up questions regarding sustainability and environmental protection. Hazardous exhaust gases are emitted not only when driving vehicles, but also during their production. The waste gas volumes in the automotive industry reach up to 200,000 Nm³/h.

  • Premium

    EDXRF spectrometers for electronics (RoHS / WEEE) industry

    Compliance with the RoHS and WEEE directives

    The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment).

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental's Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Industrial air pollution control for the chemical and petrochemical industry

    CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry...

  • Stack Testing for Cement Kilns

    CEMENT INDUSTRY: Performed RCRA Trial Burn and Comprehensive Performance Test Programs for multiple kilns firing hazardous waste fuels.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • High-calcium lime slurry for environmental reclamation industry

    Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Measurement solutions for hospital workplace exposure monitoring

    In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Industrial shredders for CIW/MSW/BW/HW industry

    CIW : Common Industrial Waste, MSW : Municipal Solid Waste, BW : Bulky Waste, HW : Hazardous Waste. All the dies of valorization/recycling of the CIW/HW start with a primary step of shredding. Since shredder 50-02 to the 12-02, according to the type of waste to be shredded, flow and required granulometry, Préciméca offers the machine adapted to your needs. Possibility of turn-key installation (handling, shredder, clasifier, magnetic seperation, etc.) or supply of single shredder, consult us!

    By Precimeca based in Toulouse, FRANCE.

  • Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer...

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Fire and explosion protection solutions for the wood and paper industry

    We provide explosion protection for wood processing factories where wood waste and dust pose a hazard. Various wood processing technologies show that flammable wood waste or dust accumulates in these facilities. In terms of evaluating the risk of explosion, finely sedimented dust is hazardous and in the event that this finely sedimented dust suspends and is connected to an ignition source, and explosion will occur.

    By RSBP spol. s r. o. based in Ostrava, CZECH REPUBLIC.

  • Sorbents

    SorbEater is a synthetic super-absorbent with the highest oil recovery ratio of ANY known absorbent material resulting in less product required and less product to dispose of. This provides significant savings on the costly disposal fees associated with hazardous waste. It is highly effective on fresh water, soil, sand and sea. During development it outperformed the traditional organic peat products in every test. Ideal for: Any hydrocarbon spills or contamination. It has been used successfully with...

    By Skyhawk Global Ltd based in Barry, UNITED KINGDOM.

  • Water treatment research for refining and petrochemicals industry

    Refining processes like distillation use high quality steam that must be generated from ultrapure water. Advanced wastewater treatment technologies will help the industry meet tough regulations concerning hazardous waste products from process operations. As the industry expands into water-scarce areas in India, China and the Middle East, marginal sources can help meet the demand for water. Desalination and reuse technologies will secure a reliable source of water and help the industry manage its water impact....

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Measurement solution for medical workplace monitoring

    In taking a responsible stance on the exposure of workers to any potential hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air. Anaesthesia machines, ventilators, breathing systems and waste gas scavenging systems will all contribute to te background level of he anaesthetic gases that are present in the environment within a facility, whether those machines are in a...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Environmental Reporting

    The Q EHS Environmental Reporting suite provides key tools for compliance with environmental legislation pertaining to the management, storage, use release, and disposal of hazardous materials. The software was developed to produce a variety of practical reports such as: • Performance and compliance assessments • Regulatory report submittals • Metrics and trend analyses for facility, divisional, and corporate management • On-site environmental incident occurrences Q EHS Air - Q EHS Waste - Q EHS Water - Q EHS...

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you