Only show results available in Virginia? Ok

hazardous waste handling Applications

  • Handling hospital waste and laundry

    Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • Waste handling in nursing homes

    Large amounts of hazardous waste and contaminated waste are handled at modern nursing homes, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • Premium

    Recycling equipments for shredding hazardous waste

    The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from the soil washing process. However, we are able to handle soil contaminated with mercury, hydrocarbons, PAH, PCB, dioxins, furans, organic-lead compounds and many more. VacuDry plants for on-site ex-situ remediation projects are delivered in a modular design.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Waste Management Issues

    • Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013); • Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013); • Inventory of Waste (the detection, identification, description and registration of waste, amounts accounting of their formation, recycling and removal; the identification and examination of waste's places and objects of waste operation); • Development of guidelines for safe waste disposal; • Development of technical passports of different hazardous wastes; • Development of a Passport for a Sites for the Disposal of Waste (PSDW).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • X-ray fluorescence XRF analysis for environmental protection and waste management

    To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Landfill Piping Solutions

    Landfills are active environments. Through natural processes of rainfall, condensation, and decomposition, landfills themselves produce a liquid waste stream, called leachate. Often the leachate contains hazardous materials, so properly managing a landfill requires handling the waste. ISCO offers products and services to help manage leachate including HDPE landfill pipe, perforated and slotted pipe as well as custom fabricated fittings.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Industrial shredders for CIW/MSW/BW/HW industry

    CIW : Common Industrial Waste, MSW : Municipal Solid Waste, BW : Bulky Waste, HW : Hazardous Waste. All the dies of valorization/recycling of the CIW/HW start with a primary step of shredding. Since shredder 50-02 to the 12-02, according to the type of waste to be shredded, flow and required granulometry, Préciméca offers the machine adapted to your needs. Possibility of turn-key installation (handling, shredder, clasifier, magnetic seperation, etc.) or supply of single shredder, consult us!

    By PRECIMECA Environnement based in Toulouse, FRANCE.

  • Combustible Aluminium, Titanium and Magnesium Dust Collection

    The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers Coal mining – material handling, de-dusting, drying, air cleaning Food (flour, sugar, and others) – mixing, grinding, blending, bagging, and packaging Foundry – sand handling, tumbling mills, abrasive cleaning, and shakeout Pharmaceutical – mixing, grinding, blending, bagging, and packaging Rubber – mixing, grinding, talc dusting, de-dusting, and batch-out rolls Woodwork – woodworking machines, sanding, waste conveying?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you