Only show results in Virginia? Ok

heating plant Applications

  • Industrial heat solutions for power plants

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA).

  • Organic Rankine Cycle for electricity from heat collected by solar collectors

    Turboden units allow to convert the heat collected by solar collectors into electricity through an efficient thermodynamic cycle. Concentrating Solar Power systems with Turboden ORC can be cost-effective from 200 kW electric, depending on the irradiation of the installation site.

    Is it suitable for you?

    • Concentrating solar collector field from 2 ha
    • Hybrid CSP plants, e.g. solar+biomass

    By Turboden srl based in Brescia, ITALY.

  • Premium

    Continuous emissions monitoring in waste incineration plants

    Waste-to-energy through incineration of waste is an effective way of producing electricity and heat, at the same time getting rid of the possibly hazardous or unrecyclable waste. The waste can be incinerated at specific WtE plants or at plants with permission for co-incineration of waste at biomass boilers or cement kilns. The waste incineration plants are, however, governed by strict emissions regulations.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    VOCs gas leak detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threat

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Portable and fixed gas analysers for farm waste AD (small scale)

    Individual farms install AD (anaerobic digestion) plant and use for on-site heating to generate revenue and dispose of farm waste, which may be a mixture of animal and plant waste.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air dedusting for clinker cooler

    e control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler is usually a problem for plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum conditions.

    The usual dedusting arrangement is achieved through a bag house which is typically associated with high maintenance costs and downtime in production due to frequent filter element replacements.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Pumps for Asphalt / Bitumen

    DESMI has a full range of different pumps and matching equipment supporting the handing of bitumen products. Including unique features suited for today’s needs and new polymer based formulations, we have the solution. For certain applications, we can offer proven sealing options, available is also a patented zero-leakage pump with a state of the art magnetic coupling. This pump offers a total protection against spillage and vapour, which may create environmental hazards. Electrical heating is an alternative to heating by liquid or steam. Applications tend to fall into four categories: Production (refining), distribution (terminals), hot mix (paving mixtures), and roofing (filled asphalts). Refineries and terminals often use steel pumps, while hot mix asphalt plants use mainly cast iron pumps with heating jacketed, and either packing or mechanical seals. Roofing plants are generally pumping highly abrasive, filled asphalts for shingle manufacturing.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Recycling equipments for tyre recycling

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants and cement ovens or for equestrian (i.e. rubber mixed with sand or sawdust used in the horse industry as ground in the stable or at the tracks). Rubber granulate is reused in e.g. sports fields, artificial turfs, rubber mats and moulded products. Rubber powder can be reused in rubber paved asphalt. The recovered steel can be smelted and reused just like non-recovered steel. Finally, the liberated textile has a very high effective burning value and can therefore be mixed with other materials in order to increase that material’s effective burning value. Read more: http://eldan-recycling.com/en/tyre-recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Organic waste shredding with Mercodor shredding systems

    The organic waste shredding of food waste and other organic wastes are used to prepare an environmentally friendly energy, for example in biogas plants. In addition to the production of electricity or heat through biowaste serve shredded organic waste / food and the production of biodiesel. The organic waste shredding is used wherever a longer storage of bio-waste is really necessary, such as on cruise ships.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Non-Standard Applications

    Procal supply analysers to monitor many different applications from small combustion plants to large power stations. Examples include University Boiler Plants, Carbon Black Plants, Thermal Oxidisers and Community Heating Projects.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Wood Cogeneration for Rural Communities

    Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric.

    Is it suitable for you?

    • Local utilities feeding district heating
    • Large sawmills
    • Pellet manufacturing companies
    • Manufacturers of MDF / OSB panels
    • Greenhouses
    • Wine industries

    By Turboden srl based in Brescia, ITALY.

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for evaporation industry

    Based on long-time experience and permanent development of the jet pump technology Körting is a world-wide leader with their products for heat recovery. As thermocompressors in evaporation plants or as compressors to adjust pressure levels in steam networks Körting jet pumps guarantee high energy efficiency.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Continuous process waste plastic to oil recycling

    continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you