Heavy Metals Applications on Environmental XPRT

Premium

Determination of heavy metals in food

This analytical procedure is intended for measuring the content of the elements (cadmium, lead, arsenic, tin, chromium and mercury) in the samples of food products by atomic absorption spectrometry with electrothermal atomization using an “MGA-915M” Graphite Furnace AA Spectrometer.

The method is based on measuring resonance radiation absorption that occurs when the radiation passes through a layer of atomic vapor in the electrically heated graphite furnace of the “MGA-915M” AA spectrometer. The concentration of the elements is determined from the integrated analytical signal and is calculated using a preset calibration graph. The samples of food products are digested prior to analysis in accordance with standard methods.

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Heavy metal analysis for laboratories

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.

Detection of specific heavy metal content in water

Detection of heavy metal concentration in water, sea water, environmental waters and pre-treated waste water to low PPB levels using a hand held fluorimeter. Test results acquired within one minute. Technology uses DNAzyme based fluorimetric detection.

By ANDalyze based in Champaign, ILLINOIS (USA).

Premium

Scrap Metal Recycling

Recognized as an industry leader in shredder recycling, we operate 50 recycling facilities for metal, green waste, plastic, food waste, rubber, tires, RDF waste. Harden’s facilities are designed with safety and efficiency in mind for both employees and customers. Our equipment is maintained and updated regularly and our scales are calibrated quarterly. The properties of metals provide unique benefits and advantages for their recycling. Unlike other recycled materials, such as paper and plastic, metals can be repeatedly recycled without degradation of their properties. Metals from secondary sources are just as good as metals from the primary sources. The scrap metal recycling lines are extremely heavy duty systems designed for processing scrap steel, electronic waste, aluminum castings and profiles, ect. We offer both medium and high capacity plants which benefit from low maintenance & operational costs, and lower capital investment when compared with the traditional systems.

By Harden Industries Ltd. based in Zhongshan, CHINA.

Metal cutting for the metal recycling industry

Because metal scrap arrives for re-melting in many forms, it must first be processed. Heavy, bulky scrap should be densified and sheared in a guillotine scrap shear.

By Metso Recycling Equipment based in Duesseldorf, GERMANY.

Industrial wastewater treatment systems for metal industry

Removal of heavy metals (chrome, cadmium, zinc) suspended solids, oils and grease from aircraft stripping, painting and maintenance operations.

By Ecolotron, Inc. based in E. Dickinson, TEXAS (USA).

Laser & Plasma Cutting

Laser & Plasma Cutting fumes are Unbreathable. Using laser or plasma cutting equipment on either metals or plastics introduces several known carcinogens, such as fused silica and ethyl acrylate, into the air. Occupational Health and Safety organizations recommend reducing personal exposure to the lowest level feasible. Hand held plasma cutting provides metalworkers with a quick and fast way to cut large sheets of metal material. However, plasma and oxy cutting generate a large amount of sparks, slag and fume which can contain different pollutants depending on the type of material being cut. Diversitech's line of downdraft tables incorporating the plasma cutting kit are designed to extinguish the sparks and slag, using heavy duty steel bar grating and a gravel filled baffle tray while the blower pulls away all of the toxic plasma cutting fumes. When considering how to capture and filter the fumes generated from large CNC plasma cutting and laser cutting machines, a large central dust

By DiversiTech Inc based in Montreal, QUEBEC (CANADA).

Remedial Construction for Mining and Metals

ENTACT is the industry leader in the management and treatment of heavy metal impacted soil, sludge, and debris. Approximately half of the projects we have completed over the past 21 years have involved metals. These projects have included soil and sediment removal, residential cleanups, smelter closures, earthwork/mine reclamation, and decontamination and demolition of mine and mill structures at both active and abandoned facilities. ENTACT holds seven patents related to treatment of heavy metal impacted materials.

By ENTACT, LLC based in Grapevine, TEXAS (USA).

Wastewater treatment for the metallurgic industry

Waste water in this sector has a high concentration of heavy metals, oils and products in decomposition. The oils and emulgents lead to foam production at the water treatment plants. The treatment of these oils is very important.

By Aguambiente based in La Cistérniga, SPAIN.

Premium

Evaporation technology for mining & primary metals industries

Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove heavy metals, arsenic and other contaminants for safe discharge into sensitive environment.

By EVALED-Evaporator based in Zoppola (PN), ITALY.

Metal Precipitation

When used as part of a wastewater treatment program, Remotox (calcium polysulfide) can effectively reduce and precipitate a wide range of heavy metals. This product has proven effective even when treating chelated and/or complexed metals. Its unique formulation also removes chromates and dichromates without preliminary reduction of the chromium to the trivalent state.

By Graus Chemicals, LLC based in Glendale, ARIZONA (USA).

Premium

Industrial shredders system for metal shredding sector

Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.

By WEIMA based in Ilsfeld, GERMANY.

Premium

Wastewater treatment solutions for mining and primary metals industry

Water is essential component in the mining and steel industries. The main needs under this aspect are optimizing the management of the resources, improving productivity by treating available water for specific production process requirements and managing environmental risks by treating contaminated pond and underground mine water to remove suspended solids and in particular heavy metals (SS), arsenic and other contaminants for safe discharge into sensitive environment.

By IDRAFLOT based in Zoppola, ITALY.

Precipitation and flocculation

Precipitation and flocculation heavy metal removal leachate treatment

By Environmental Engineering Doellerer GmbH based in Seefeld, GERMANY.

Premium

Compacting Scrap Aluminum

T200XL Scrap metal baler is one heavy duty baler for compacting scrap aluminum into density bales.

By Enerpat Group UK Ltd based in Brentwood, UNITED KINGDOM.

Premium

Water analysis for municipal wastewater treatment

Voltammetric determination of many heavy metals is also possible in municipal or industrial wastewater. On account of the usually high organic load the sample is usually mineralized by means of UV digestion.

By Metrohm AG based in Herisau, SWITZERLAND.

Premium

Industrial wastewater solutions for electroplating wastewater

Reliably distilling complex and heavy metals: VACUDEST in electroplating applications. No company applying electroplating likes having to deal with the issue of “wastewater”. But what happens when authorities take samples of the wastewater unannounced, and finds the nickel limit has been well exceeded? A horror scenario resulting in a lot of stress, work and expense.

By H2O GmbH based in Steinen, GERMANY.

Premium

Industrial wastewater solutions for contaminated landfill leachate

Reliable treatment. Optimised for heavily contaminated landfill leachate. Whether it be household rubbish, construction rubble, contaminated soils, port sludge or waste incineration ash, final storage of these heavily contaminated materials poses a potential groundwater pollution risk from heavy metals, nitrogen bonds or organic substances. Landfill leachate resulting from precipitation on landfill sites.

By H2O GmbH based in Steinen, GERMANY.

Premium

Recycling of Incinerator Slag

Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

Premium

Water Treatment for Industrial Process

Among the various industrial treatment options available for heavy metal reduction, few are simple, proven, affordable, and reliable as the selective adsorption treatment technology offered by AdEdge Technologies. AdEdge provides a line of pre-engineered, packaged industrial wastewater treatment systems designed for removal of heavy metals from groundwater and industrial wastewater using a variety of adsorption media technologies.

By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

Subscribe to our eBulletins

Add Supplier Profile