HEPA Applications | Environmental XPRT

Premium

Cleanroom Solutions from Concept Smoke Systems

The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are ...

By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

Premium

Smoke generator device for clean room solutions

The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are ...

By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.

Premium

HEPA filter emission monitoring for pharmaceutical powder processing

In the pharmaceutical industry, finished powders are often transferred from the mixing area to tableting machines via vacuum transfer systems. Transfer lines incorporate a high efficiency HEPA filter after the vacuum pump to prevent exposure to potentially harmful dust in the workplace. HEPA filters can become ...

By ENVEA based in Poissy, FRANCE.

Premium

Data-Driven Process Control for Environmental Automation

Problem Various manufacturing industries fall in the category of highly polluting industries. Often, the manufacturing processes are responsible for pollutants like Dust, Gases, Noise eventually damaging the work environment. Additionally, such pollutants have an impact on production quality. Managing a workable environment for the personnel is mandatory compliance for industries. Also, Limiting the environmental impact in the surrounding areas is a regulatory need for the industries. Lack of ...

By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.

Premium

PVC Liner Panel for Indoor Cannabis Grow

Octaform is a manufacturer of a PVC liner panel that will ensure the facility will perform well and meet all compliance requirements / GMP considerations. PVC is essential as it has been proven in cannabis production, pharmaceutical and even surgical facilities because it has the lowest propensity to accumulate molds and other pathogens. In cannabis, it has the added benefit of offering high reflectivity which maximizes the power of the grow ...

By Octaform Systems Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).

Dustless Lead Paint Removal & Nuclear Decon Tools for Marine Industry

When ships, submarines and port facilities exposed to the corrosive marine environment need to be repainted, get to clean steel quickly and safely without any messy cleanup using our shrouded power tools! Old paint is removed and packaged in one step using our powerful VAC-PAC HEPA vacuum and deposited ...

By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Dustless Lead Paint Removal & Nuclear Decon Tools for Concrete Scabbling

When concrete is contaminated with PCBs, radiation or other hazards, scabbling is often the only means of remediation. By removing a thin outer layer from a concrete surface, our shrouded power tools can make a structure safer for occupancy or demolition. Our powerful VAC-PAC® HEPA vacuum captures all dust, ...

By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when ...

By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Welding Fume Extraction

the work piece material in order to select the correct filtration media for your application. HEPA filters are recommended for stainless steel welding, Nanofiber filters for Aluminum and parts containing higher levels of Manganese. Polyester filters are appropriate where rust inhibitor, lubricants and coatings create an ...

By Diversitech based in Montreal, QUEBEC (CANADA).

Self-contained & remote packaged cooling systems for aerospace applications

In aerospace environmental control, failure is not an option. Whether you are preparing to send payloads into space, testing ballistic missile systems, calibrating equipment in very precise conditions, or working in other areas of aerospace and defense systems, you can be confident knowing your environmental control units will be developed to precise aerospace specifications and with decades of ...

By Air Innovations based in North Syracuse, NEW YORK (USA).

Semiconductor temperature control systems & humidity regulation applications

Controlling temperature and humidity is crucial to the longevity and performance of semiconductors. Semiconductors are often fragile and operations can be impacted by minute temperature fluctuations or mild contaminants such as dust or dirt. Over the past several decades, Air Innovations has stayed in step with the innovations of semiconductor fabricators, supplying temperature and humidity control systems to meet the critical needs of the ...

By Air Innovations based in North Syracuse, NEW YORK (USA).

Solutions for dust control in tool hire

In the hire business, dust control is well understood, at least for clients. However, protection of employees against dust from returned tools is another matter. A huge number of hire businesses receive tools back from clients and then use an airline to blow them clean – without knowing or identifying the dust contained within the unit. Often the process takes place outside, to avoid dust contaminating the workshop. This is all bad practice – in particular, for cases when the tool may be contaminated ...

By AirBench Ltd. based in Colchester, UNITED KINGDOM.

Aerosol and particle technology for filter testing industry

Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...

By Palas GmbH based in Karlsruhe, GERMANY.

EN14683 Medical Facial Masks BFE Test

The EN14683 norm refers to Medical Facial Masks BFE Test, it describes testing methods for medical facial masks intended to limit the transmission of infectious agents between patients and clinical staff during surgeries and other medical contexts with similar ...

By TCR-Tecora based in Cogliate (MB), ITALY.

Air filtration solutions & corrosion monitors for hospital

You are proud of the services you deliver to improve health and save lives. We can help you deliver a safer environment with increased patient comfort, promoting a nurturing environment and a sense of ...

By Purafil, Inc. - Filtration Group based in Doraville, GEORGIA (US) (USA).

Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry

Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint, PCBs and asbestos on a large ...

By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Self-contained & remote packaged cooling systems for military applications

The military needs equipment that will perform reliably long after standard solutions have failed. Given the certainty of operation in harsh and demanding environments, designing and fabricating equipment for use in military and defense applications requires a great deal of precision and care. Creating controlled environments for these settings requires versatile solutions that can handle a broad range of complex environmental conditions. Air Innovations has designed and built environmental control systems for a ...

By Air Innovations based in North Syracuse, NEW YORK (USA).

VOC abatement equipments for pharmaceutical

Humidity control is an important factor for stable and predictable pharmaceutical production. From R&D labs to bulk production, humidity can affect both the chemical and mechanical properties of formulations, which can lead to quality issues and Good Manufacturing Practice (GMP) challenges. Laboratory and pharmaceutical product dehumidification systems can be the right solution to help prevent moisture issues during the production process for tablets, capsules, powders, and ...

By Munters based in Amesbury, MASSACHUSETTS (USA).

Air purification / filtration systems for welding & robotic welding

Poisonous gases, fumes and sparks are created anytime metals are welded together. It doesn’t matter what type of welding equipment is used or what type of metal is being welded. The fact that welding is among the most common industrial processes means that air filtration for welding and robotic welding is an important ...

By Diversitech based in Montreal, QUEBEC (CANADA).

Filtration systems & solutions for nuclear industry

Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable ...

By Porvair - Filtration Group based in Fareham, UNITED KINGDOM.