Only show results available in Virginia? Ok

in-situ remediation Applications

  • Solutions for the in-situ soil remediation

    For over twenty years, BioSolve Pinkwater has been used for Surfactant Enhanced Remediation (SER) to mobilize and solubilize residual NAPL[i], facilitating its recovery and disposal. Depending on soil and plume characteristics, Pinkwater solution can reach contaminated zones through deep injection wells or be gravity fed from surface level injection galleries. After desorbing residual NAPL from soil surfaces on contact, Pinkwater then solubilizes the hydrocarbons in an aqueous emulsion, enabling extraction at down gradient recovery wells or trenches.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • In-Situ Soil & Groundwater Remediation

    The use of H2O2 to chemically oxidize the contaminants into mineralized products (CO2 , salts, and readily biodegradable organic fragments) offers a number of advantages over these current treatment methods. Benefits of Soil Decontamination by Chemical Oxidation: The reagent used (H2O2) is inexpensive, readily available, and has as its reaction products water and oxygen; The chemistry of the process (Fenton's Reagent) has been known for over 50 years and its applicability to a wide variety of contaminants is well documented; The process is easily applied and controlled; The treatment occurs rapidly, lasting from a few hours to a few weeks; The process produces no by-product wastestreams, and can be tuned for the degree of contaminant removal desired. This allows it to be used synergistically with other technologies such as biotreatment or soil washing.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    In-Situ Groundwater Remediation for the Site Remediation Industry

    In-situ groundwater remediation method is based on injection of Fe(0) nanoparticles through application wells directly into the contaminated water. nZVI injection is very fast, reaching significantly lower operating costs compared to commonly used remediation methods (expensive construction of reactive barriers, building of pump&treat stations, excavation of contaminated soil etc.). In comparison to other in-situ technologies a far lower quantities of injected chemical is needed due to high efficiency of the product and thus the time and cost of remediation is reduced.

    By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.

  • Premium

    Metal Stabilization

    In-situ geochemical fixation using a chemical reductant such as Remotox (calcium polysulfide) converts the soluble toxic metals into insoluble non-toxic compounds. Remotox has proven to be effective under a wide range of conditions. It is considered more stable and persistent than other reductants in subsurface environments, and is relatively safe to handle in the field and easy to apply.

    By Graus Chemicals, LLC based in Glendale, ARIZONA (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Total Chemical Management Solutions for ISCO

    US Peroxide provides turn-key chemical management and field service programs to engineering companies and remediation technology applicators using In-Situ Chemical Oxidation (ISCO) or other technologies requiring chemical storage and handling. USP programs have proven to be cost effective and highly efficient using custom-designed chemical handling and management programs deployed by highly skilled field service teams. www.h2o2.com

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • US Peroxide Total Chemical Management

    US Peroxide (USP) provides turn-key chemical management and field service programs to engineering companies and remediation technology applicators using In-Situ Chemical Oxidation (ISCO) or other technologies requiring chemical storage and handling. USP programs have proven to be cost effective and highly efficient using custom-designed chemical handling and management programs deployed by highly skilled field service teams. Advantages USP can supply a wide range of chemicals such as hydrogen peroxide, ferrous sulfate, sodium persulfate, acids and others commonly used for ISCO or other remediation technologies. USP works with remediation companies to develop a cost effective, logistically optimized and reliable chemical management program based on project specific chemicals, quantities, usage rates and other project constraints. We can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Soil and Groundwater treatment solutions for bioremediation industry

    Today bioremediation is successfully used as soil– and groundwater remediation technology. Many bioremediation systems, both in-situ as ex-situ techniques, usually result in considerable cost savings. Since the beginning of the 1980’s both in-situ and ex-situ bioremediation projects have been successfully completed worldwide through the use of preselected and adapted bacteria. QM Environmental Services supplies a range of microbial, bioactivator and nutrient products and gas delivery systems for the use in both aerobic and anaerobic bioremediation programs. Most common contaminants ranging from aliphatic hydrocarbons such as petroleum, lubrication oils, aromatic compounds like benzene and toluene to chlorinated solvents can be treated with these products.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you