Waste incineration is a complex area. The mix of waste, moisture content, temperature of the waste, surrounding air and a variety of other factors interact and affect which residues are formed. Combustion entails often a gas consisting of heavy metals, sulfur oxides, chlorides, dioxins, etc. It is extremely important with a proper handling of the gas and the task often requires a mixture of wet and semi-dry treatment. EnviBAT offers equipment that brings particle levels down to extremely low levels, which guarantee...
Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.
For industrial and municipal treatment plants; Chemical scrubbers, biological towers and adsorption systems to remove hydrogen sulfide, mercaptans, other organic sulfur compounds and ammonia from digesters, pump stations, ponds, grit and screening works, sludge filter presses and dryers. Special Wet Electrostatic Precipitator for sewage sludge incinerators. Stripping ammonia and other volatile compounds. Decarbonization removal of carbon dioxide from wastewater.
Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.
Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.
The pharmaceutical industry worldwide is facing a major challenge. The productions of desired chemicals leaves an amount of by-products, some of them dangerous to both humans and the environment. An incinerator is usually used to deal with the challenge to reduce the volumes of hazardous substances. This process, however, creates sub-micron particles that conventional filter technology cannot handle. By using EnviBAT’s technology for gas cleaning – the best in the industry – such issues can be...
Sulfur plants, acid plats etc. Chemical industry is important to our modern society, but they also produce large quantities of chemical byproducts. These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue gases.
From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from evaluating their air pollution control requirements.
Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes....
Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the world.
Cooper Environmental's Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be...
PCB Boards and E-scrap Recycling Plant
3.Why buy MINGXIN's E waste(PCB) Recycling plant ?
Get the metal separated from waste circuit board through crushing and air separation process.
No incineration and pollution.
compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling.
The plant has 5 advantages:
A. The coarse crush can grind baseplate and separate electronic component..
B. National Environment Protection Standard achieved. No dust leak and no secondary...
In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental...