The diversified consumer goods industry, with its broad range of products, is a significant area for air pollution control applications. Today, the ecological image of a company and its products is an important factor in the purchase decisions of customers. An increasing number of suppliers, therefore, aim to maintain their growth with ecologically sustainable production.
Since mankind`s early beginnings, mining, metallurgy and the subsequent processing of natural resources have evolved into one of the most significant industries. Known as `heavy-industry`, this branch plays an important economic role in most countries. The scope of applications for CTP systems ranges from the mining of natural resources (e.g. bauxite and gold-ore mining), through the production of acetylene gas from coal and calcium carbonate, to the aluminium and steel industry and their foundries.
Fossil fuel, hydropower as well as nuclear energy continue to be the world`s predominant energy resources. Increasing efforts are being invested in the securing of new fonts of energy. Extensive industrial research opens a broad variety of new applications for air purification.
Increased mobility and the soaring worldwide demand for cars have opened up questions regarding sustainability and environmental protection. Hazardous exhaust gases are emitted not only when driving vehicles, but also during their production. The waste gas volumes in the automotive industry reach up to 200,000 Nm³/h.
The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs, DVTs, TFT-LCD and plasma displays. The electronics industry...
One of the oldest industry sectors, the construction materials industry has developed a broad range of products that is constantly adapting to the state of technology and architecture: Concrete, thermal and moisture protection, masonry, plastics, composite materials and finishes, are all used in the erection of buildings and structures, and also as auxiliary materials on construction sites.
The pharmaceutical industry is one of the most important and growing industries worldwide. Personal well-being is becoming ever more important, and the accelerating ageing effect consequently gives rise to increased expenditure on pharmaceuticals and medicine. CTP air pollution control systems not only focus on pharmaceuticals and generics, but also on applications in medical supplies, ranging from bandages and associated materials to medical and plastic implants.
Quality of life and well-being are, more than ever, important issues for consumers. The `wellness` concept has changed the food industry: Today, all food manufacturers are committed to increasing the nutritional value of their products, while constantly improving the taste. Their innovations require continuously inventive solutions in air pollution control.
Few industries attract the attention of the public as does the oil & gas industry with its related strategic products (basic materials for the chemical, pharmaceutical, varnish and cosmetics industries). The bringing of oil and gas from their original sources to the consumer, into their final forms, represents one of the most complex chains in the quest to add value to raw materials.
Wood is one of the world`s oldest and most important raw materials. Apart from applications in the furniture and building industry and related sectors, CTP systems are used for air purification in the production of lumber products such as plywood panels, fibre boards (particle boards, MDF, OSB) and compressed wooden parts.
CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are...
Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.
The raw material stacked in the stock areas is reduced to the limit values specified in the “Industrial Air Pollution Control” regulation of the Ministry of Environment and Urbanization with water pulverization fan spraying dust control systems during loading and unloading and suppression of dust released by wind. These values are also compatible with international PM 10 measurement limit values, which are sub-10 micron particle measurements.
The semi-conductor, circuit board and electronics industry have multiple applications for air pollution control equipment from the control of cleaning solvents and acid gas to the capture of particulate matter.
There are many options when choosing a type of system to control Industrial Air Pollution, in particular VOC (volatile organic compound emissions). While thermal oxidation is a method used quite often, catalytic oxidation remains amongst the lowest total cost of ownership methodology for abating VOC’s. Applied Catalysts manufactures a full portfolio of catalysts, trademarked Abate VOC, on varied supports. Depending on the application or style of catalytic oxidizer to be employed, ceramic or metal monolith,...
Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.
One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.
Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...
In cement plants, in the process of preparing raw materials such as limestone, gypsum, clay, trass, iron environment to the process, in crushers, conveyor belt transfer points, stocking raw materials with stacker, triper car, and suppressing the dust released by wind during clinker bucket belt shedding and stock areas, With dual fluid water pulverization and fan sprayed dust control systems, dust is reduced to below the limit values specified in the “Industrial Air Pollution Control” regulation of the...