Only show results in Virginia? Ok

industrial air system Applications

  • Odor control for the tobacco industry

    Tobacco produces a strong, characteristic smell. The process airflow from the tobacco industry mainly comes from drying the tobacco leaves. Through central air exhaust systems, all air submitted from the drying process is blown outside. Because this is a very large waste airflow, odour nuisance in the neighbourhood is likely.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Premium

    Industrial air pollution control for the metals and mining

    Since mankind`s early beginnings, mining, metallurgy and the subsequent processing of natural resources have evolved into one of the most significant industries. Known as `heavy-industry`, this branch plays an important economic role in most countries. The scope of applications for CTP systems ranges from the mining of natural resources (e.g. bauxite and gold-ore mining), through the production of acetylene gas from coal and calcium carbonate, to the aluminium and steel industry and their foundries.

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Applications and Air Pollutants Removed in the Fertilizer Industry

    Wet Scrubbers, dry collectors, wet electrostatic precipitators and complete engineered systems for urea, MAP, DAP, TSP and AN Plant rotary dryers and coolers, reactors and ammoniation granulators, pug mills, rock acidulation, curing, storage and material handling operations to control emissions of: particulate, including phosphate rock dust, ammonium phosphate, ammonia, nitric acid, NOx, phosphoric acid, hydrogen fluoride, silicon tetrafluoride, sulfuric acid, removal. Complete systems for scrubbing and...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Temperature measurement and control devices for aircraft & aerospace industry

    TTEC manufactures T/C`s & RTD`s for a variety of Aircraft & Aerospace Applications, including Test Stands, Environmental Chambers and Heat Treating Furnaces for Aircraft Components. NIST Traceable calibration tests and material tests reports are available as required. TTEC Style 8012 RTD`s with DIN Class A special accuracy are use to precisely measure Environmental Chamber Temperatures. These Chambers re-produce in-flight conditions that aircraft parts will be exposed to. Accurate & Stable readings...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Systems for the EPS foam processors industry

    Without an effective processing strategy, foam waste can easily overrun your valuable floor space. And depending on the volume and variety you accept, a simple compression solution might not be enough. Do you need a dedicated densifier for each grade? Is an air conveyance system right for your operation? OBC has years of experience analyzing and prescribing equipment configurations for effective foam processing solutions.

    By OBC Baling Equipment based in Cleveland, OHIO (USA).

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Air pollution control for the converting, coating industry

    Companies that coat paper, film, or foil webs with solvent coatings or silicone coatings – commonly use thermal oxidizers and heat recovery systems for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Applications and Air Pollutants Removed in the Energy (Power) Industry

    Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Process instrumentation and analytics solutions for HVAC-R industry

    Siemens is a trusted partner for single-source solutions that bring your Heating, Ventilation, air conditioning and refrigeration systems (HVAC/R) installations to a whole new level of energy efficiency. From cogeneration energy production, district heating and cooling systems to compressed air and steam applications, we maximize your energy conservation and optimize the cost effectiveness of every process.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Air sampling & monitoring systems for defense/military sector

    From portable hand held battery operated to rugged field deployable, military organizations worldwide rely of HI-Q air sampling systems & accessories during research, development, test and evaluation (RDT&E) and for reliable protection of personnel from Nuclear Biological Chemical Threats. HI-Q’s emergency response air sampling kits have offered the Defense & Military Industries a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Air Quality Monitoring Equipment for Automotive Industry

    Engine and vehicle emissions testing involves complex routines and audit regimes to meet with exacting modern legislation.  The methods for measuring gases are also prescribed by the relevant authority and so you might imagine that the equipment for emissions testing is all the same.  Signal take a different approach to our competitors. By designing bespoke systems from a selection of standard modules, we supply all the equipment and features you require, but nothing that you don`t.  This makes...

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries

    From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • PLAZKAT systems for treatment of printing industry emissions

    During production of printed materials the ambient air in the working area absorbs a lot of gaseous pollutants (contaminants) that have so-called `paint smell` - solvents of various kinds (alcohols, ketones, aromatic hydrocarbons, etc.). The presence of these substances in the working area ambient air produces harmful effect at least on the personnel. In addition, solvent emission into the air is penalized in compliance with current regulation.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Air pollution control for the soil remediation industry

    Treatment of exhaust gases from systems that process polluted or contaminated soil – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Gas detection solutions for the breathing air gas sensors industry

    If you use compressed breathing air it is essential to monitor for contaminants including carbon monoxide (CO), carbon dioxide (CO2) and volatile organic compounds (VOCs) as well as oil mist and water vapour. Some people spot-check their compressed air quarterly using colorimetric tubes, but it is safer to test the air continuously. If you are  operating or servicing equipment containing fluorinated greenhouse gas (F gas) in refrigeration, air conditioning and fire protection systems you need to adhere to...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you