Only show results available in Virginia? Ok

industrial boiler Applications

  • Industrial solutions for boiler feedwater impurities

    Problem: Poor water quality can result in significant operational problems and possible shut down of boiler systems. To limit the potential for scaling, deposition and corrosion, most boiler water is treated physically or chemically to remove impurities and improve efficiency in the system.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small space. The automatic zero pressure measurement is ideal to monitor flow or draft induction. With a pitot tube you can quickly measure velocity and determine mass flow even during long term testing. The Testo 350 makes reporting in lbs/hour easy!

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Industrial water boiler feed water

    Ion exchange is an effective, versatile means of conditioning boiler feedwater. The term “ion exchange` describes the process : as water flows through a bed of ion exchange material, undesirable ions are removed and replaced with less objectionable ones. For example, in softening processes, calcium and magnesium ions(hardness) are exchanged for sodium ions. In dealkalization, the ions contributing to alkalinity(carbonate, bicarbonate, etc.) are removed and replaced with chloride ions.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler system - feed water tank, boiler, steam and condensate system.

    By Kurita based in Tokyo, JAPAN.

  • Power Industry

    Our activities are closely interconnected with the energy industry. The precision casting foundry casts rotor and stator blades for gas turbines followed by precision grinding by the Industry Division. Furthermore, we also perform machining of shafts, complete blade attachment as well as subsequent assembly of steam and gas expansion turbines. PBS ENERGO, our affiliate company, focuses on the design and manufacture of steam and gas expansion turbines, including the delivery of complete plant systems. Our colleagues in První brněnská strojírna, a.s. specialise in the manufacture of boilers for various types of power plants. From design up to complex deliveries. Our products are subjected to extensive quality testing. Quality Management System according to ISO 9001 is fully implemented in our production process.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC.

  • Pellet Classification for the Energy Industry

    Schenck Process provide systems that deal with wood pellets and chips feed solutions in the safest manner by using variable concepts and offering a range of conveying methods to deal with the differing feedstock characteristics. Alternative fuels are either discharged directly from trailers with “walking floors” or are delivered in tipping containers via road or rail. Schenck Process automated extraction screws, chain conveyor or pneumatic conveyors can be used to deliver the appropriate amount of fuel via a weighing check system for boiler feed regulation.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation of their facilities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Evaporation technology for food and beverage industry

    The food & beverage industry uses water for containers’ and plants’ rinsing, raw materials and plants’ washing, and for boilers feeding. All the effluents coming from the production process can be reused a second time allowing water saving and matter recovery (when needed).

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Industrial Solution for pulp & paper

    Stringent regulations all over the world, including the new Boiler MACT ruling, are being enforced on new and existing air pollution control systems. Many of the existing scrubbers are having a more difficult time meeting performance criteria. Macrotek has the innovative solutions to retrofit existing systems or replace with new systems to meet and exceed new targets.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Applications and Air Pollutants Removed in the Agricultural Industry

    Particulate and gaseous control on Bagasse and Biomass fueled boilers. Sugar scrubbing and recovery. Removal of sulfur dioxide and ethylene oxide from fruit and vegetable ripening and drying rooms.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Water treatment solutions for the hospitality industry

    For Kinetico, that realization extends to the importance of specialized water treatment solutions customized for specific, wide-ranging applications. Our filters and softeners come in a variety of configurations designed to produce safe, clean drinking water and remove contaminants and hardness. This greatly improves overall water quality and protects expensive (and essential) boilers, laundry facilities and commercial kitchen appliances. To convert first-time guests into repeat customers and to safeguard your costly equipment, turn to Kinetico for the highest-quality water.

    By Kinetico - an Axel Johnson Company based in Køge, DENMARK.

  • Gas measurement for the pulp & paper industry

    The Kurz Insertion Mass Flow Meter products provide extremely reliable and accurate measurements for the harsh environment of a recovery boiler facility, without restricting airflow even in short run ducts.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Industrial water softening

    The presence of certain metal ions in water causes a variety of problems. These ions interfere with the action of soaps, lead to build up of limescale, which can foul plumbing, boilers, heating equipment. Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water extends the lifetime of plumbing and heating equipment. Softening of low TDS ( Total Dissolved Solids ) water is done commonly with a Strong Acid Cation ( SAC ) exchange resin operating in the sodium form and regenerated with brine. PuriTech`s latest development is a very performant continuous ion exchanger, based on PuriTech`s innovative ION-IX technology which is based on true counter-current ion exchange.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Water treatment chemicals for the food & beverage industry

    The food and beverage industry is suffering from severe economic pressure. Efficient and continuous production processes are therefore business critical. By choosing Kurita concepts for your cooling water, boiler water and waste water plants as well as your reverse osmosis systems and autoclaves – all of which are specially adapted to your needs – you opt for economic and ecological treatment, leading to more productivity and cost-efficiency.



    By Kurita based in Tokyo, JAPAN.

  • Premium

    Pipes and Storage Systems for Water Treatment Industries

    GCER has know-how and a large experience in the water business. We offer a range of industrial pipes and boiler of high quality combining good mechanical strength, lightness employment and a long service life. GCER present for any project of treatment of waste water and the desalination of seawater.

    By GCER based in Ksibet, TUNISIA.

  • Gas Detection Solutions for Power Generation Industry

    Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Innovative Pump Technology for Ship Industry

    In shipbuilding, high standards of reliability as well as increasingly the energy efficiency of the systems are important prerequisites for the economical-technical overall evaluation in the technical procurement process. Ships as self-sufficient systems are particularly dependent on the reliable functioning of all installed components, including the pumps. They fulfil many tasks on board which are vital for the operation of the vessel: Delivery of ballast water and wastewater, boiler supply, condensate recovery, drive engine cooling and of course the reliable supply of fire fighting systems.

  • Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed in the Energy (Power) Industry

    Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you