industrial clean air Applications
-
Air cleaning system for the healthcare industry
Indoor Air Quality and advanced environmental control strategies are playing a growing role in patient safety as hospitals and medical care facilities strive to improve wellness metrics and provide the best in healing environments. Three key factors make attention to indoor air quality particularly important in health care settings.
By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).
-
Safe and biodegradable specialty cleaning chemicals for aerospace & defense industry
By Apex Engineering Products Corporation based in Aurora, ILLINOIS (USA).
-
Safe and biodegradable specialty cleaning chemicals for HVAC industry
By Apex Engineering Products Corporation based in Aurora, ILLINOIS (USA).
-
PremiumIndustrial air pollution control for the electronics and electrical industry
The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs,...
By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.
-
PremiumAir pollution control for the remediation industry
The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
PremiumAir pollution control for the ethanol/biodesel industry
Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries
From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing...
By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).
-
Applications and Air Pollutants Removed in the Food Products Industry
Complete line of dry and wet collectors for applications requiring removal of particulate from dryers, mixers, blenders and tanks. Odor control wet chemical scrubbers with liquid or gas phase oxidation chemistries and Bioscrubber systems to control odoriferous food products, ingredients and flavor emissions from processes and dryers including fish odors. Corn acidulation and starch processing acid and ethylene oxide emissions. Remove smoke house emissions and particulate, grease and odors from meat...
By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).
-
Air pollution control (APC) equipments for pharmaceutical industry
The pharmaceutical industry worldwide is facing a major challenge. The productions of desired chemicals leaves an amount of by-products, some of them dangerous to both humans and the environment. An incinerator is usually used to deal with the challenge to reduce the volumes of hazardous substances. This process, however, creates sub-micron particles that conventional filter technology cannot handle. By using EnviBAT’s technology for gas cleaning – the best in the industry – such issues can...
By Envibat AB based in Skellefteå, SWEDEN.
-
NOx Analyzers for environmental, ambient air and research industry
Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.
By Eco Physics Inc. based in Ann Arbor, MICHIGAN (USA).
-
Integrated real-time gas analysis solution for electronic specialty gases industry
By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).
-
Biomass Furnace Dust Filtration
Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.
By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.
-
Air pollution control for soil remediation
Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.
By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA).
-
Environmental data managament & compliance reporting for the manufacturing industry
Environmental data allows organizations to manage and monitor their compliance with greenhouse gas regulations, the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and many others. Additionally, many companies must generate and report environmental data to uphold permits which allow them to conduct their business.
By enVirSys LLC. based in Littleton, COLORADO (USA).
-
PremiumOdor control for refining/petroleum
You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...
By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).
-
Usage
By Biomicrobe Technology based in Jakarta, INDONESIA.
-
Combustible Aluminium, Titanium and Magnesium Dust Collection
The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium...
By Diversitech based in Montreal, QUEBEC (CANADA).
-
Grinding & Deburring
Grinding & Deburring dusts are Unbreathable. Many industrial processes generate contaminants in the air in the form of dust and particles. Airborne dust and fine particulate can be hazardous to human health, and should be extracted before it reaches the worker`s breathing zone.? Typical sources of these pollutants arise from cutting, grinding using an angle grinder or die grinder, automated grinding machines, deburring work and many other abrasive processes. Robotic grinding machines generally create a...
By Diversitech based in Montreal, QUEBEC (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you