For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.
By Körting Hannover AG based in Hannover, GERMANY.
Waste wood is a precious resource that is available in large volumes and may be used either for material recycling or energy production, depending on the quality grade. The rising cost of waste material disposal and a growing consciousness for the environment also contribute to the increasing importance of waste wood recycling. The term “waste wood” includes all woods and wood-based materials that have come to the end of their product lifespan and are thus considered waste.
By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.
Reducing the risk of infection transmission. In a world where high-density living in urban areas is increasing, and healthcare and the spreading of pandemics are among top concerns, the role of the cleaning industry is of great importance, though often underestimated.
By Industrie De Nora S.p.A. | De Nora Water Technologies based in Milan, ITALY.
The mercerisation of cotton materials yields large quantities of weak caustic soda. Recovery of mercerising lye by means of our Körting evaporation technology developed specially for this process results in an immense saving of costs and a minimised impact on the environment. When combined with a specially co-ordinated lye cleaning system the result is a nearly 100% recovery of lye.
By Körting Hannover AG based in Hannover, GERMANY.
Applications for Coulson Ice Blast in the Rubber Industry sector:Ice:
- Compatible with Spring Vent Mold Technology, Puzzle Mold Technology, Die Cast Mold Technology and Mini Vent Mold Technology
- Compatible as a drop-in to existing robotic automated systems
- Cleans mold fouling, including the chemical reactions of sulfur, zinc oxide and residual rubber
- Cleans the tire bead surface to improve the seal on a wheel
- Cleans vents and micro valves...
In a cutting-edge sector, such as Pharma & Cosmetics production, the needs related to wastewater can be summarized as optimization of the whole water cycle management, controlling the costs and respecting the environment. Within the Health Care industry, water is commonly used in liquid, either as an ingredient in many formulations and also as a cleaning agent. The wastewater coming from these processes can offer opportunities for matter recovery and water reuse.
By EVALED-Evaporator based in Zoppola (PN), ITALY.
We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and...
By International Surface Technologies based in Laval, QUEBEC (CANADA).Premium
Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s...
By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).
Every municipality in the developed world has some form of water and wastewater treatment system. This varies from simple outfalls direct to the ocean to very sophisticated activated sludge plants with multiple unit processes dedicated to converting human waste, industrial effluents and storm runoff into clean water discharges and solids acceptable for some form of reuse. inVentures using its gas inFusion technology, has developed the gPRO system for the prevention and remediation of major algae blooms that...
By inVentures Technologies Incorporated. based in New Brunswick, NEW BRUNSWICK (CANADA).Premium
The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
Applications of Coulson Ice Blast in the Marine Industry sector:Ice
- Anti-Fouling paint removal
- Engine bay cleaning in hard to reach places
- Buoy cleaning
- Barnacle cleaning
- Railings, balconies, gates
- Blistering fiberglass repair
- Sea water intake valves
- Cleaning tanker compartments
- Cleaning bilge
- General Barge/ Tug cleaning
- Anti-Fouling paint...
Hygienically pure potable water and clean swimming pools on board cruise ships. Reliable water treatment solutions are crucial on board ships. ProMinent has both the necessary know-how and extremely precise metering technology to deliver the best water quality 24 hours a day.
By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.
Sustainable Solutions for Future Water Challenges. Rising population levels and more groundwater sources becoming polluted have resulted in clean water becoming increasingly scarce in many countries around the world. As governments and municipal bodies turn to alternative sources of water, such as seawater, brackish water and groundwater, they require cost effective technologies to produce potable water while managing waste water discharge for smart, sustainable water management.
By Hyflux Membranes based in Singapore, SINGAPORE.
Macrotek has designed and supplied systems for many different applications in the food sector including sugar, starch, corn, sugar cane and rendering. A common challenge in many of these industries is the collection and treatment of explosive dust. Baghouses were the primary technology for particulate clean up, however, recent major incidents and explosions in these industries, particularly sugar handling, have resulted in a review and change in dust system collection design and strategy. Macrotek is an...
By Macrotek Inc. based in Markham, ONTARIO (CANADA).Premium
As most of the largest industrial users of water, the paper and pulp industry have long treated water in accordance with environmental permits. Water is used in all major process stages, including raw materials preparation, pulp washing and screening and paper machines. Water is also used for process cooling, materials transport, equipment cleaning, general facilities operation and to generate steam for use in processes and on-site power generation. Lenntech provides sustainable complete solutions for ingredient...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
Pulp and paper industry is one of the largest industries in the world. This industry deals with lots of harmful chemicals. Ice blasting is a non-abrasive and chemical free cleaning process with negligible airborne which is the answer to a range of cleaning issues.
Applications for Coulson Ice Blast in the Pulp and paper industry sector:Ice:
- Cleans all piping, valves, floor gratings, walls and machine structures of chemical residues.
- Removes lime build-up from various walkways,...
The food industry has a wide range of different production processes. Each process uses its own production technology. The food industry has very high standards when it comes to hygiene. Installations and ducting must be made out of stainless steel, in order to be cleaned periodically. Aerox has a lot of experience within the food industry and its specific demands.
By Aerox B.V. based in Vleuten, NETHERLANDS.Premium
AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards. On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a...
By AppliTek NV based in Nazareth, BELGIUM.
Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.
By Elgin Separation Solutions based in Stafford, TEXAS (USA).Premium
Increasing population growth and urbanization rates across the world are placing increasing stress on clean water resources and making it more imperative to treat domestic waste water. Additionally, rising water costs due to increasing water scarcity and implementation of tighter environmental regulations to reduce waste water discharge limits are requiring municipal domestic wastewater treatment operators to seek innovative and efficient domestic wastewater treatment solutions. Genesis Water Technologies...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you