Only show results available in Virginia? Ok

industrial combustion Applications

  • Combustion gas analysis for the glass industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Premium

    Air combustion for the petroleum refining industry

    By AEREON based in Austin, TEXAS (USA).

  • Premium

    Enclosed air combustion for the natural gas industry

    By AEREON based in Austin, TEXAS (USA).

  • Air Quality Monitoring Equipment for Combustion Industry

    Boilers and Combustion Research A fuel source burning with oxygen to produce carbon monoxide, carbon dioxide and water is an equation from school science lessons but looking into the fuel temperature and oxides of nitrogen produced along with the CO, CO2 and O2 is work that is being carried out by boiler makers, power generators and all sorts of industrial applications every day.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required. 

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Premium

    Measurement solution for Biomass combustion research

    The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new fuels.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Combustible Aluminium, Titanium and Magnesium Dust Collection

    The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers Coal mining – material handling, de-dusting, drying, air cleaning Food (flour, sugar, and others) – mixing, grinding, blending, bagging, and packaging Foundry – sand handling, tumbling mills, abrasive cleaning, and shakeout Pharmaceutical – mixing, grinding, blending, bagging, and packaging Rubber – mixing, grinding, talc dusting, de-dusting, and batch-out rolls Woodwork – woodworking machines, sanding, waste conveying?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Premium

    Gas monitoring and dust monitoring for the power industry

    LaserGas measurements

    • Boiler combustion control, O2 and CO
    • DeNOx system, NH3 and NO
    • Electrostatic precipitators (ESP), CO monitoring for explosion prevention
    • Stack gas emissions, NH3, H2O, NO
    • Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants)

    LaserDust measurements

    • Stack gas emission
    • Coal silo, explosion prevention

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Infrared sources for industrial and safety sector

    Axetris infrared sources are used in a variety of industrial applications: Combustible and Toxic Gas Detection, Refrigerant Monitoring, SF6 Monitoring, Fruit Ripening Monitoring, Flame Detection, Liquid Analysis using Attenuated Total Reflection ATR, Semiconductor Fabrication.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Measurement solutions for automotive industry

    The roots of SMART TESTSOLUTIONS lie in the automotive market. We have a particularly broad product range here and are an innovative, reliable partner for our customers all over the world. Our range of services for the automotive industry and its suppliers ranges from state-of-the-art measurement and simulation technology up to development and consultation services. We support our customers on their way to the mobility of the future with our know-how. From the development of particularly effective combustion engines and compliance with future emission values up to the implementation of alternative drive technologies.

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • Premium

    Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Gas monitoring and dust monitoring for the steel industry

    • Blast furnace offgas, combustion control, CO, CO2, O2
    • Converter (Basic oxygen furnace BOF)
      • CO gas recovery
      • O2 measurement for explosion prevention
    • Electric arc furnace offgas, combustion control, CO, O2, H2O
    • Reheating furnaces, O2
    • Coking plant
      • CO analysis in oven offgas
      • O2 analysis for explosion prevention in raw coke gas or after tar precipitator
      • NH3 measurement after scrubber
      • H2S measurement after scrubber

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    Measurement of hydrogen in fuels for oil & gas industry

    The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Cement & Lime Industry Emissions Analysis & Monitoring

    A key issue in the measurement of the products of combustion in Cement and Lime industries is the high levels of particulates. The Procal 2000 in situ analyser`s heated probe option is especially suited to this industry as it efficiently deals with variations in process temperature, keeping the probe above the sample dew point and safe from corrosive condensate.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Waste shredding for the waste-to-energy industry

    With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Integrated real-time gas analysis solution for emissions industry

    Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of toxic combustion products, including CO, CO2, NOx, SOx, CH4, CxHy, H2S, etc. The EP-IRGAS-SPA is also applicable for fast time responses.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Secundary air flow measurement for power generation industry

    Secondary Air Flow Overview: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Accurate secondary air flow measurement to the burners is critical for maintaining the proper air to fuel ratio, result­ing in more complete and stable combustion, better performance and lower emissions. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements including large ducts, limited metering runs, poor velocity and temperature profiles, vibration and high temperatures.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you