Only show results available in Virginia? Ok

industrial dust filter Applications

  • Premium

    Application package for analysing slags and filter dusts

    This application package is a `ready to go` calibration kit for xrf instruments. The analysis of slags and filter dusts in the metal industry delivers important information about the production process. FLUXANA has developed a fusion slag + filter dusts method which allows the direct analysis of most common slags and filter dusts. Elements of interest and calibrated concentration ranges can be selected individually by the customer.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Gas monitoring and dust monitoring for the cement industry

    LaserGas measurements

    • Preheater exit, CO monitoring
    • Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention
    • Coal silo, CO monitoring
    • Exit of coal mill, dust filter, CO monitoring
    • Stack gas emissions, HCl and HF

    LaserDust measurements

    • Stack gas emissions
    • Coal silo, explosion prevention

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Knockers, Vibrators and Rappers for Dust Collectors

    The Cleveland Vibrator Company offers a wide range of pneumatic, piston-driven, industrial vibrators, knockers, impactors and rappers to dislodge collected dust from precipitator wires and plates or baghouse filter bags as well as keep dust free flowing in collection bins and hoppers.

    By Cleveland Vibrator Company based in Cleveland, OHIO (USA).

  • Biomass Furnace Dust Filtration

    Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Solutions for personal protection against vapors, gases, air particles & dust

    Our activated carbons provide personal defense solutions against vapors, gases, air particles, and dust. Proven Experience: Since 1942, Calgon Carbon has been helping the world breath more easily by providing the most technologically advanced activated carbons for personal and collective protection filters. Today, we supply high-quality impregnated carbon for military, industrial, and laboratory markets. As new needs for personal protection emerge, we will continue to develop new products and find innovative uses for existing ones.

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • Foundry dedusting systems

    Dusts and fumes coming out of part of induction melting fumaces are collected by means of special designed suctioning apparatus and are filtered in both BOMAKSAN brand, Hatemak serial high performance "Cyclone" and long-life "Jet Pulse Cartridge Filter". In addition, dusts coming out of vibration screen used during mould distortion are filtered in same way.

    By Bomaksan Industrial Air Filtration Systems based in Atasehir, TURKEY.

  • Premium

    Odor control for the poultry feed production

    The animal feed industry has its roots in the way traditional millers grinded the grains centuries ago, using (wooden) windmills. Nowadays feed is produced for chickens and other poultry, as well as for cattle, pigs and horses. There is a wide variety of feed and grains produced, with different raw materials (nutrients) applied in several compositions.

    In this modern era electric driven pellet mills are applied and grains are cooled mainly in counterflow coolers. To remove dust from the used cooling air usually a baghouse filter is being used which can meet the current severe dust emission standards. After this the air eventually will be blown outside. Especially the cooling air of poultry feed and pig feed production should be deodorized to prevent complaints.

    A factory usually has multiple pellet lines in service with about 15,000 to 25,000 m3/h of cooling air per line. Aerox has developed specific solutions for this industry.

    On the one hand a compact Aerox®-Injector can be installed per pellet line. On the other hand, airflows of different production lines can be joined together and can be treated with one compact Aerox®-Injector. In practice, this can be added up to 4 lines with a total airflow of up to 90,000 m3/h.

    Since the Aerox®-Injector can run on different capacities unnecessary power consumption is prevented when not all pellet lines are in service. This benefits the environment and reduces operational costs.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Grinding & Deburring

    Grinding & Deburring dusts are Unbreathable. Many industrial processes generate contaminants in the air in the form of dust and particles. Airborne dust and fine particulate can be hazardous to human health, and should be extracted before it reaches the worker`s breathing zone.? Typical sources of these pollutants arise from cutting, grinding using an angle grinder or die grinder, automated grinding machines, deburring work and many other abrasive processes. Robotic grinding machines generally create a large volume of particulate which can require more filtration media to handle increased dust loads. Whereas other applications such as deburring can create very fine submicron particles that require the use of a high efficiency HEPA filter to capture the fines.? Metal, composite, fiberglass and rubber dust can be extremely dangerous to inhale and can be associated with many different lung conditions and health problems. Diversitech offers a diverse range of dust collectors, extraction arms, filter cleaning machines and downdraft tables for your grinding dust filtration requirements.???

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you