Only show results in Virginia? Ok

industrial emissions Applications

  • Premium

    Emission Monitoring for the Metal Industry

    The metal industry comprises a large variety of different branches, beginning with metal winning and recovery, metallurgy, metalworking and extending to manufacture of machines and devices for which metal finishing and electroplating are indispensable process steps for quality standards. These industries face the difficulties of improved process control and lower environmental stress. AppliTek implements on-line monitoring in specific processes of the metal industry to increase process efficiency and lower emissions to air.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Exhaust Gas Emissions

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping & vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital ininformation for process development and process monitoring...

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Electrostatic Precipitator

    An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an induced electrostatic charge. Electrostatic precipitators are highly efficient filtration devices that minimally impede the flow of gases through the device, and can easily remove fine particulate matter such as dust and smoke from the air stream.[1] In contrast to wet scrubbers which apply energy directly to the flowing fluid medium, an ESP applies energy only to the particulate matter being collected and therefore is very efficient in its consumption of energy (in the form of electricity).

    By MEVADHASHMA based in Coimbatore, INDIA.

  • Premium

    VOC emission treatment for flexographic industry

    As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Flexographic manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

    By Tecam Group based in Llinars del Vallès, SPAIN.

  • Premium

    Continuous emissions monitoring for glass manufacturing industries

    Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and others.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Emission Control Systems for Mechanical Evaporation Industry

    Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of time.

    By EmiControls based in Bolzano, ITALY.

  • Continuous emissions monitoring for mining industry

    Opsis non-contact monitoring solutions are very well suited for applications in the mining Industry, as the flue gas conditions often involve high temperature and high dust concentrations.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • Paper & Pulp Industry Emissions Monitoring

    The Procal 2000 emissions analyser is ideally suited to the harsh environments associated with Paper & Pulp Plants.  The in situ, multi-component Continuous Emission Monitoring (CEM) system has an integrated auto-zero and calibration facility, thereby removing the need for intervention by maintenance staff under normal conditions.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Fugutive Emissions Measurement

    Emission Measurement – An estimate of the total fugitive emissions from a site can be determined using environmental data, EPA gas dispersion models, and GasFinder2 sensor data.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small space. The automatic zero pressure measurement is ideal to monitor flow or draft induction. With a pitot tube you can quickly measure velocity and determine mass flow even during long term testing. The Testo 350 makes reporting in lbs/hour easy!

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Premium

    Continuous emissions monitoring for chemical industry

    Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Chemical Industry Emissions Analysis

    The inherent flexibility of Procal analysers enables the instruments to be configured to meet Customer’s specific requirements. Their capability to monitor gas concentrations at elevated pressures and temperatures make Procal products ideal for process applications in the Chemical Industry.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • PLAZKAT systems for treatment of printing industry emissions

    During production of printed materials the ambient air in the working area absorbs a lot of gaseous pollutants (contaminants) that have so-called `paint smell` - solvents of various kinds (alcohols, ketones, aromatic hydrocarbons, etc.). The presence of these substances in the working area ambient air produces harmful effect at least on the personnel. In addition, solvent emission into the air is penalized in compliance with current regulation.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    VOC emission treatment for automotive auxiliary industry

    As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Automotive manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

    By Tecam Group based in Llinars del Vallès, SPAIN.

  • Premium

    VOC emission treatment for petrochemical industry

    As for VOC emission treatment, each Industry has its own technical requirements. As a technology supplier, we at Tecam Group are familiar with the production processes and requirements of Petrochemical manufacturers, and have a deep understanding of the technology they require for exhaust air emission treatment, and specifically, for Volatile Organic Compounds VOC emission treatment.

    By Tecam Group based in Llinars del Vallès, SPAIN.

  • Premium

    Emission Control Systems for Recycling and Composting Industry

    The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and disposal of contaminated soil from industrial sites.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    VOC emission treatment for Coating industry

    Specific characteristics of this Industry: Large air flows. Medium VOC concentrations.

    By Tecam Group based in Llinars del Vallès, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you