Only show results available in Virginia? Ok

industrial gas standard Applications

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Ultraviolet Disinfection system for the Oil & Gas industry

    atg UV Technology are the worlds’ only UV manufacturer to specialise in ultraviolet (UV) treatment systems and integrated UV, filter and dosing packages for the oil and gas industry. With over 30 years` experience in both the onshore & offshore oil and gas sector, atg UV Technology can offer both standard and bespoke UV water treatment solutions for a vast range of oil, gas & petrochemical applications.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Medical Gas Analysis for Process Industry

    USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. Following the appropriate United States Pharmacopeia standards, in this case specifically USP37, requires an analyzer which uses a paramagnetic based technology.  The Systech Illinois Paramagnetic Oxgyen Analyzer PM700 is perfectly suited for this medical gas analysis application.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Rugged Mobile Technology for Oil and Gas Industry

    Oil and gas personnel spend a large amount of time in remote pipeline locations and on oil rigs — environments that aren’t exactly gentle on technology. Our handhelds are tested to military standards for ruggedness, yet they’re also extremely compact, ergonomic and user-friendly. Handheld products allow you to easily capture data associated with resource-monitoring and transport tasks, and keep all your important information secure while you focus on doing your job efficiently and safely.

    By Handheld Group AB based in Lidköping, SWEDEN.

  • Marine envrionmental solutions for oil & gas industry

    Fugro EMU Limited provides turn-key marine environmental services to major oil and gas providers in the UK and overseas by combining its multi-disciplinary capabilities in environmental consultancy, ecology, geophysical and metocean survey, geology and laboratories with its fleet of dedicated offshore vessel services. Fugro EMU vessels enable its consultant teams to deliver project specific needs from exploration through to development and decommissioning in addition to oil spill contingency planning. This includes all aspects of environmental operations and maintenance requirements in UK and overseas coastal and offshore territories. Recent mergers have seen Fugro EMU develop and grow as a company and has continued to support the fundamental belief in the importance of health, safety and welfare. Fugro EMU prides itself on conforming to the stringent standards expected by the oil and gas industry.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • RTO (Chemical) Industries Waste, Paint, Wood chip and

    Our company Honeycombs Ceramics B.V. supports installations used for RTO (Regenerative Thermal Oxidizer). These gas (waste) installations use ceramic beds of blocks to cool released hot gasses. This is one of the most important processes within the installation. Honeycombs Ceramics B.V. is established in Europe and China. This global connection makes us unique, it takes one contact to make RTO business a low-cost and durable business. Our lines are short, we are always available, and both countries have sales offices and warehousing. Core feature: Efficiency. The way you do business with RTO providers can be converted to a more simple, safe and secure way. By giving you the opportunity to choose how, when and where. Our companies in the Netherlands and China have professional sales teams. And their goal is to assist you. You can decide which office to contact. 24/7. Our production in China is under strict policy of quality control. We have inspectors in China and the Netherlands who both follow strict instructions to meet our high standards. These standards are measured and recorded by SGS every year. Pricewise we offer high quality for low pricing. Next to quality, there is warehousing. Our warehousing is extensive, with supervision of quality- and logistic managers. Also, there is the opportunity to keep stock in both countries. We understand the importance of availability when needed. Whether this is emergency, temporary, or for quantities based on a turn around. Based on all input from customers and opportunities in RTO business, we innovate and make possibilities work. In short; no fuss, that's us.

    By Honeycombs Ceramics BV based in Sassenheim, NETHERLANDS.

  • Integrated real-time gas analysis solution for specialty gases industry

    CIC Photonics’ extensive experience with gas analysis has also included what the industry refers to as Specialty Gases, as distinguished from Semi Gases, Electronic Specialty Gases, and Industrial Gases. Specialty Gases are high purity gases used across many applications by researchers, by government agencies, and by commercial businesses. Included among these users and applications are: hospitals for medical gases; environmental labs and testing companies for blends of protocol gas mixtures; calibration gases; spectroscopy standards; gas composition measurements and confirmations; and others.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Industrial air pollution control for the electronics and electrical industry

    The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs, DVTs, TFT-LCD and plasma displays. The electronics industry has important standards to meet regarding environmental protection. CTP complies with these requirements: From zero emission goals, to installations on the roofs of production facilities.

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole, 300 amu mass range is standard. Differentially Pumped Manifold With Mounting Flange to Process Chamber. Ion Optics with Energy Analyser and integral ioniser. Penning Gauge and interlocks to provide over pressure protection. Data System with integration to the process tool. Stability (less than ±0.5% height variation over 24 h). MASsoft control via RS232, RS485 or Ethernet LAN. Programmable DDE, Parallel Digital I / O, RS232 Scripting Communication

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • Water removal filtration

    SAF is the key component for a wide range of enhanced nonwoven filter media fabrics that are designed for the removal of water and particulates from aviation fuel, automotive diesel and a wide range of oils. Such fabrics help reduce problems associated with water contamination in such situations. Its versatility gives rise to cost savings over traditional cellulosic-based absorption media, while offering full compliance potential to stringent international filtration standards – particularly in the aviation fuel and hydraulic oil markets. Applications: A significant reason for the majority of oil and fuel system failures is the presence of high water levels in dissolved, dispersed and free water. SAF-based filter media fabrics can remove both dispersed and free water to very low ppm levels at industry leading rates. This leads to reduced fuel and oil degradation and provides the required filter quality for efficient machine operation.

    By Technical Absorbents based in Grimsby, UNITED KINGDOM.

  • Premium

    Chemiluminescense based analyzer for industrial applications

    Whether combustion, waste incineration or power plant, most of the hot processes call for a measurement of the exhaust gas direct at the source by national laws and international standards. No matter where and at what concentrations nitrogen oxides have to be detected, you can depend on ECO PHYSICS analyzers to handle the job quickly, reliably and with a precision that is unmatched anywhere in the world. Whether at trace levels in a clean room environment or for the analysis of exhaust gases directly at the source, you will find the type of chemiluminescence detector (CLD) to perfectly suit you at ECO PHYSICS.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for waste water remain unchanged, resulting in an increased demand for professional water treatment.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Electrochemical solutions and water technologies for marine industry

    In the marine market, ocean-going vessels and fresh water or inner coastal boats require water treatment technologies to meet drinking water, process water and wastewater requirements. Offshore oil and gas operations and ocean-going vessels generate sewage that can contain contaminants which have a detrimental effect on water quality and the overall marine environment. As a result, marine sewage treatment systems are required to lessen the environmental impact. The MEPC.227(64) effluent standards, adopted by the International Maritime Organization’s Marine Environment Protection Committee, apply to all sewage treatment systems installed on board on or after January 1, 2016.

  • Measurement solution for fire testing for the railway industry

    A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Solutions for Safe disposal during Emergencies, leakages, Tank Cleaning operations

    For temporary installation of a are, needed for only a short time in one place to handle localized waste gas disposal problem. SIES offers skid-mounted Mobile Flares Units to allow mobility. Such types of systems are useful for Gas pipe line/ Gas distribution network within a large plant (Petrochemical & Refineries) & Landfills. SIES design & Supply Mobile Flare for Oil and Gas industry, Waste gases, LFG operations and tank Cleaning operations. The Flares have inbuilt capabilities to handle wide variety of gas with full safety and precaution as per API Standards..

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use. The system is able to measure the total concentration of the SF6 gas in an enclosed area, where the switchgear (or other SF6 filled equipment) is tested. Although only the total amount leaked is required by today’s standards, it is also advantageous to be able to pin point the leaks. This makes it easier to improve the integrity of the equipment. The SF6 Leak Detector system meets all of requirements for confined area such as substation Monitoring.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

  • Marine And Offshore Emissions Monitoring & Analysis

    The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Fuels and exhaust gas emissions are subject to international, regional and national controls and Charterers, as well as the public, demand high standards of performance and reliability.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Chromatography systems for environmental monitoring

    With the growth of contamination generated from agricultural and industrial production, it causes a threat to the enviroment including drinking water, atmosphere and soil. The chemists have always seeked out the effective analytical methods to detect and identify chemical contaminants. Dikma provides innovative products and application solutions according to government regulations and industry standards, for air and water quality monitoring, gas detection.

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA).

  • Measurement solution for total VOC via FTIR

    Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are taken as the standard reference method for Total VOC emission measurements.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you