Only show results available in Virginia? Ok

industrial hazard safety Applications

  • Premium

    Hazardous chemicals management for the health care industry

    By RegScan, Inc. based in Williamsport, PENNSYLVANIA (USA).

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Trapped Key Interlocks for Lockout Tagout Procedure

    Enhancing your lockout tagout procedure with KIRK trapped key interlocks ensures energy isolation procedures are followed in a predetermined sequence of events every time. Typical industrial equipment may contain hot fluids, blades, fans, pinch points, and moving parts hazardous to workers and other equipment. A written lockout tagout procedure is used to document the steps to remove/isolate the energy source(s). This written procedure includes; identifying the energy source(s), isolating the energy source(s), locking and tagging the energy source(s), and verification that the energy isolation has been effective.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Premium

    Industrial air pollution control for the chemical and petrochemical industry

    CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are often explosive mixtures, CTP systems have to be completed with special safety conduits and filters to help reduce hazards during continued operation.

  • Premium

    Track and Trace and Inspection Solutions for the Oil & Gas Industry

    The Oil and Gas industry often operates in hazardous environments where there is a greater need to manage the risk of fires and other accidents. You want to ensure the safety of your facilities and you also want to demonstrate that you comply with regulations.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Water Disinfection for Industrial Water Treatment

    MIOX’s patented Mixed Oxidant Solution (MOS) or Hypochlorite (HYPO)chemistries for cooling tower and cooling loop water disinfection improves safety, lowers general corrosion rates, increases performance, and saves money. The unique qualities of MOS lowers corrosion rates by 80% in copper and 50% in steel, resulting in a reduction of downtime, maintenance, and expense. Additionally, MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining steady disinfection residuals.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    VOCs gas leak detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threat

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Dairy, Food & Beverage LIMS Services

    Benefits: Adhere to compliance guidelines, improve efficiency and profitability. Analyse hazards, manage critical control points in production. Improve scheduling and planning of testing through automation. It has never been more critical to maintain quality standards and safety guidelines than in the modern food and beverages industry. With so many possibilities for incidents of food contamination, compliance with strict regulations is controlled demanded more now than ever.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

  • Trapped Key Interlocks for Flow Control

    KIRK Eagle Series valve interlock systems can be implemented within many industries in which managing the flow of materials and products is critical.  Valve interlocks can aid in minimizing loss of product, preventing materials from mixing that may cause hazardous results,  and promoting flow control process safety that protects your personnel and equipment. The specific flow control applications below can be designed to meet the unique needs of every customer and can be added to an existing KIRK trapped key interlock system.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Water Disinfection for Aircraft

    Drinking Water Treatment and Disinfection for the Transport Industry Even Airbus, the world’s largest aircraft manufacturer implements the REDO technology. Prior to delivering the new aircrafts, all of the drinking water pipelines are disinfected with the REDO Technology. Then the water tanks are filled with disinfected water from a REDO unit. A significant advantage is the enormously reduced service time, in comparison to alternative methods. In addition, one profits from a better work-flow and last but not least, from the guarantee of maximum safety – there are no hazardous potentials with the REDO Technology.

    By REDO Water Systems GmbH based in Groß-Zimmern, GERMANY.

  • Site and Risk Assessments, Risk Management and Remdial Solutions

    No matter what the size of the project is, we service residential, commercial, industrial, local, state and federal agency clients, conducting environmental site assessments, deterministic and probabilistic risk characterizations and Indoor Air Forensic Investigations to evaluate the impact of exposures to hazardous chemicals and radio-logical materials on human health, public welfare, safety and the environment in MA, NY, CT, RI, NH, CO, and the Virgin Islands. Projects undertaken comply with Federal CERCLA/SARA, TSCA, RCRA, RBCA, Brownfields, NRC, DOD and DOE regulations and/or programs, and at the state level: Massachusetts Contingency Plan (MCP), Connecticut Department of Energy & Environmental Protection (CTDEEP) Remedial Standards, New Hampshire Department of Environmental Services (DES), New York (NYSDEC), New Jersey, Maryland, Rhode Island and other state programs, using innovative approaches to develop site-specific risk-based cleanup strategies and

    By Risk Management Incorporated - Environmental Services based in Acton, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you