Only show results available in Virginia? Ok

industrial sensor Applications

  • Premium

    Meteorological Sensors for Building Automation Industry

    Smart homes need a professional weather sensor that controls watering, closes the windows when it rains and optimizes the energy requirement (heating / cooling), depending on the external conditions. The better the weather information the megacities collect, the better the traffic management. The WS700 collects all measurement data for optimal weather-dependent building control. Rain / snow differentiation and maintenance- free intensity measurement of all types of precipitation. As an option, lightning detection can be integrated into the WS800. Insurance companies require proof in case of building damage.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Meteorological Sensors for Traffic Weather Industry

    Traffic weather is our keyword for every weather monitoring system, that helps to increase safety on roads, railways, in the air and on the sea.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Meteorological Sensors for Hydro-Meteorology Industry

    Climate change makes for more extreme weather. The main reasons for this are wind and precipitation.That is why an increasing number of meteorological and hydrological monitoring networks are coming together. Global coverage with hydro-meteorological measuring technology is varied. Very old and very modern (new) measuring networks are used for climate monitoring worldwide. And there are still large gaps, for example on the oceans.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Meteorological Sensors for Meteorology Industry

    Sustainability is a often-used word. But building environmental monitoring networks is complicated and expensive. When planning, therefore, it is important to consider the sustainability - means service life of the entire system. And since this typically should be more than 10 years, the system must allow permanent modernization and improvements.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Meteorological Sensors for Solar Monitoring Industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Meteorological Sensors for Airport Weather Industry

    Airport Weather Sensors and Components for Airport Weather Observation Systems (AWOS) and Runway Ice Detection Systems (IDS): Ceilometer, Cloud Height, Cloud Cover, Visibility and Runway Condition Sensors. Airports around the world use Lufft technology because it’s flexible, comes with open protocols and easy to integrate into existing solutions. Moreover Lufft’s sensors are reliable under any weather conditions and maintenance-free.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.

     

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Combined photo-radiometric probe for Museum & Metal Industry

    The combined photo-radiometric probe LP471P-A measures the two parameters of principal interest in the field of lighting, namely the ILLUMINATION (lux) and UVA IRRADIANCE (W/m2). The probe is composed by a luxmeter and an UVA radiometer. The signals of the two sensors are read and processed at the same time to visualize the relation between the two quantities expressed in µW/lumen. The two sensors are equipped with a diffuser for the correct measure according to the cosine law. The probe LP471P-A is particularly useful when the simultaneous measurement of illuminance and UVA irradiance is required. For example, in museum environment when it is necessary to evaluate the UVA radiation level in the lamps in order to avoid damage to paintings or wood or any other historical art objects(CIE 157) and another area of interest is the Non Destructive Testing (NDT) that employ penetrating liquids, used primarily in the fields of mechanics and aerospace(ISO 3059:2001)

    By Delta OHM S.r.L. based in Caselle di Selvazzano, ITALY.

  • Premium

    Multiparameter Monitoring for the Defense Industry

    Our COTS (commercial off the shelf technology) approach to military requirements ensures some of the very best sensor technology available to measure speed of sound, temperature, depth, conductivity, salinity and density on both surface vessels and submarines.  Valeport equipment in both standard and bespoke formats is in regular operational use by many Navies worldwide.  Standard equipment can be re-packaged to suit your needs and replace legacy equipment.  

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Premium

    Oxygen Permeation Analyzers for Packaging Industry

    Systech Illinois` oxygen permeation analyzers offer reliable and versatile testing for all bottles, packages and films. These instruments provide extremely fast purge down time; accurate readings at the lowest levels and the highest quality sensors in the market. The changeover from wet to dry sample runs is the fastest on offer. Precise control gives a wide sample temperature range of 5° to 50°C and a measured and controlled relative humidity range of 20 to 90% RH.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Portable Leak Detection

    GasFinder2 can be used as a portable open path gas sensor to survey a large site relatively quickly. Areas of elevated gas concentration can be bracketed using shorter path lengths in order to locate leaking valves, flanges or fittings.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Fugutive Emissions Measurement

    Emission Measurement – An estimate of the total fugitive emissions from a site can be determined using environmental data, EPA gas dispersion models, and GasFinder2 sensor data.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Perimeter Monitoring and Area Monitoring

    GasFinder2 can be permanently installed to monitor chemical and petroleum plants for both combustible and toxic gases. GasFinder2 can be used to replace arrays of point sensors for perimeter monitoring. A single light path will replace many point sensors. With GasFinder2 perimeter monitoring, all gas dispersed from a facility is detected and logged.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small space. The automatic zero pressure measurement is ideal to monitor flow or draft induction. With a pitot tube you can quickly measure velocity and determine mass flow even during long term testing. The Testo 350 makes reporting in lbs/hour easy!

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • TESTS ON THE FIELD FOR PV PLANTS

    There is no legislation to control of the proper functioning of pyranometers used to measure solar radiation installed in the PV field. The control can be effectively carried out with portable instruments suitable to avoid uninstalling pyranometers set in areas normally inaccessible as placed at the side of panels. A quick test on the field assesses whether a good maintenance is sufficient to obtain a reliable measurement of the solar radiation or if it is necessary to send radiation sensors to the manufacturer for a control. In order to make a test on the field and verify the proper operation of a photovoltaic system, Delta Ohm provides a set of tools that allow an easy and flexible use.

    By Delta OHM S.r.L. based in Caselle di Selvazzano, ITALY.

  • Premium

    Thin-film Measurement Technology for Medical Industry

    The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the patient.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Multiparameter Monitoring for the Offshore Oil & Gas Industry

     Meeting the demands of small ROV’s to work class vehicles in the offshore oil & gas industry, Valeport have a range of sensors and probes to measure the physical parameters vital to safe operation.  From sensors to aid operation of the vehicle to probes for data input into metrology and construction operations, our “industry standard” packages are designed and built to perform.

    AUV requirements can mean provision of complete housed instruments or OEM style for users own interface.  Our small, low power, accurate and robust sensors will aid AUV manufacturers and users to get the data required.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Industrial solutions for water monitoring

    Water monitoring involves many different activitites, from ensuring the quality of surface or underground water, both for human beings and animal life, to the monitoring of a country’s water infrastructure. Wireless sensor networks are becoming increasingly popular in this area and ADVANTICSYS has already explored its use for many novel applications.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Premium

    Thin-film Measurement Technology for Measurement and Control Industry

    Measurement and control is an essential element in determining the effectiveness of products in the Process Control industry. A wide variety of applications are met in this industry by IST’s diverse family of temperature sensors. Additional process control applications are met by unique humidity and flow sensor products offered by IST.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you