Industrial Waste Management Applications on Environmental XPRT

Waste dewatering for waste management industry

Separation and dewatering of suspensions are important process stages when treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in an optimal way in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sortation and dewatering of waste streams.

By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

Environmental data management for the waste industry

By EarthSoft, Inc based in Concord, MASSACHUSETTS (USA).

Odor control solutions for solid waste industry

Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall population.

By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

Premium

Waste Management Solutions for Metal Manufacturing Industry

There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can overcome these challenges must be considered. Tetronics can assist with a range of metal manufacturing waste challenges, including:

By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

Premium

Industrial air pollution control for the recycling and waste management

Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

Premium

Waste compaction for the waste & recycling industry

If you are in the business of waste management, you will share our vision of implementing streamlined systems, operationally sound processes and reliable equipment. HSM is committed to providing the right baler specification for your process, no matter how demanding. HSM has many important and longstanding relationships with many global leading waste management and recycling businesses, supplying balers around the world. We share their visions and understanding of their operational needs.

By HSM GmbH + Co. KG based in Frickingen, GERMANY.

Separation and dewatering of digester output for waste management industry

Separation and dewatering of suspensions are important process stages in treating waste and digester output. BELLMER KUFFERATH machines, within an overall waste management concept, divide waste streams into separate streams in waste treatment plants, for which specific treatment methods make sense. Apart from single machines, BELLMER KUFFERATH also supply complete systems for sorting and dewatering of waste streams.

By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

Premium

Electronic scrap shredding for the electronic waste management industry

One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets.

By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

Dewatering of explosive / corrosive media for waste management industry

In customer-specific chemical processes, explosive and corrosive solvents are used to systematically change the stock characteristics of e.g. pulp or plastic which calls for appropriate measures to protect the machine as well as the environment. To meet such requirements, BELLMER KUFFERATH Machinery has adapted their screw presses` proven functional concept to suit special requirements, such as:

By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

Premium

Wastewater treatment management for domestic waste water reuse industry

Increasing population growth and urbanization rates across the world are placing increasing stress on clean water resources and making it more imperative to treat domestic waste water. Additionally, rising water costs due to increasing water scarcity and implementation of tighter environmental regulations to reduce waste water discharge limits are requiring municipal domestic wastewater treatment operators to seek innovative and efficient domestic wastewater treatment solutions. Genesis Water Technologies provides these specialized modular treatment solutions to assist municipalities and communities in reducing your waste water footprint, decreasing operational costs, while increasing domestic waste water quality to maintain regulatory compliance.

By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

Solid waste management @ source:

Any industry that is producing a food waste that can be handled and disposed / treated in our system safely, conveniently, and hygienically.

By EcoCare Technologies based in Chennai, INDIA.

Premium

Waste compaction for the retail industry

Retail outlets and leisure facilities will undoubtedly generate large quantities of waste. Heavy footfall inevitably leads to waste management issues in order to ensure premises are kept clean, tidy and safe. HSM’s balers offer the ideal solution for any shop, retail outlet and leisure facility. HSM’s product range includes small footprint balers ideally suited to retail waste and a cost-effective and efficient alternative to skips and bins.

By HSM GmbH + Co. KG based in Frickingen, GERMANY.

X-ray fluorescence XRF analysis for environmental protection and waste management

To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

Enterprise resources planning for the waste & recycling industry

THE CHALLENGE: NOT ONLY DISPOSAL, BUT ALSO PROCESSING. The waste management and recycling industry consists of companies acting as waste collection and landfill operators, processers (sorters, waste treatment specialists, shredders and recyclers) or traders in secondary raw materials.

By FWI Information Technology GmbH based in Steyr-Gleink, AUSTRIA.

Large waste bins for councils and municipalities and the industry

Absolutely hygienic, stable and cost-efficient. The MGB with spherical base represents hygienic waste disposal of residual and organic waste as well as food waste. The dustbins are optimised for side loaders. Cost benefits for councils and municipalities as well as private waste management companies. Absolutely low-noise, serially only 89 dB in accordance with EU outdoor noise directive 2000/14 EC at the MGB 120-KB and 91 dB at the MGB 240-KB. High operational safety.

By P. Henkel GmbH based in Kreuztal, GERMANY.

Balers and compactor solutions for facility management industry

The success of any waste handling or facility management contract depends on your ability to offer value adding and reliable services to your customers at the best possible quality compared to the investment. The customer’s needs vary and the right solution depends on several important factors.

By Bramidan Balers based in Bramming, DENMARK.

RTO (Chemical) Industries Waste, Paint, Wood chip and

Our company Honeycombs Ceramics B.V. supports installations used for RTO (Regenerative Thermal Oxidizer). These gas (waste) installations use ceramic beds of blocks to cool released hot gasses. This is one of the most important processes within the installation. Honeycombs Ceramics B.V. is established in Europe and China. This global connection makes us unique, it takes one contact to make RTO business a low-cost and durable business. Our lines are short, we are always available, and both countries have sales offices and warehousing. Core feature: Efficiency. The way you do business with RTO providers can be converted to a more simple, safe and secure way. By giving you the opportunity to choose how, when and where. Our companies in the Netherlands and China have professional sales teams. And their goal is to assist you. You can decide which office to contact. 24/7. Our production in China is under strict policy of quality control. We have inspectors in China and the Netherlands who both follow strict instructions to meet our high standards. These standards are measured and recorded by SGS every year. Pricewise we offer high quality for low pricing. Next to quality, there is warehousing. Our warehousing is extensive, with supervision of quality- and logistic managers. Also, there is the opportunity to keep stock in both countries. We understand the importance of availability when needed. Whether this is emergency, temporary, or for quantities based on a turn around. Based on all input from customers and opportunities in RTO business, we innovate and make possibilities work. In short; no fuss, that's us.

By Honeycombs Ceramics BV based in Sassenheim, NETHERLANDS.

Systems for the product/material destruction industry

Product destruction can be a tricky undertaking. Not only do you have a mixed material stream to manage, but you also need to extract and discard the contents of those materials before they can be recycled. Every operation really does require a custom solution that works best for your demands. From deliquifying bottles and cans, to destroying poor-quality or outdated products, OBC has the experience to help you determine the most efficient and effective process to achieve your goals. Keep your workplace environment clean and sanitary, and maximize profit by maximizing throughput.

By OBC Baling Equipment based in Cleveland, OHIO (USA).

Sludge monitoring for water and wastewater industry

Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

EPR waste minimisation monitoring for wastewater treatment industry

The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a point scoring system to assess operators under the OMA-3 program and this will be used to identify how well a company is managing their processes and possibly identify areas for improvement. The Environmental Permitting Regulations require industry to install instrumentation (MCERTS approved where available) to report water quality. EPR compliance monitoring may include automatic water sampling, flow measurement, pH, turbidity and TOC water analysis. Industry will need to identify point of source emissions, take steps to correct inefficient control and alarm unacceptable process deviations. Although the legislation focuses on environmental improvement, good housing keeping also makes a lot of sense. Optimisation of process control minimises waste, reduces treatment costs and ultimately saves money.

By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

Subscribe to our eBulletins

Add Supplier Profile