Only show results available in Virginia? Ok

industrial waste recovery Applications

  • Premium

    Biogas recovery for waste to energy industries

    HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste recovery for metal manufacturing

    There are several challenges faced by the metal manufacturing industry. Firstly, there is a drive to recover as much metal credit as possible before disposal of by-products as wastes. Secondly, there is a requirement to minimise waste generation or alternatively minimise the costs of managing the disposal of any hazardous waste material generated during the manufacturing process. Finally, keeping the company competitive by generating value or by reducing costs in the manufacturing process. Any solutions that can overcome these challenges must be considered. Tetronics can assist with a range of metal manufacturing waste challenges, including:

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Waste recovery for nuclear wastes

    Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Air pollution control for the energy recovery industry

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy conscious designs available today. We recommend analyzing these systems periodically to determine energy reduction opportunities. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Waste shredding for the waste and recycling industry

    WEIMA makes waste valuable! No matter if it is industrial waste, bulky waste, production waste, rejects, paper, wood waste, textiles or carpet. WEIMA delivers the optimum results, winning secondary resource recovery by delivering correct size reduction. WEIMA shredding solutions are designed for every stage of process tailored to your individual needs.

    By WEIMA based in Ilsfeld, GERMANY.

  • Stack Testing for VOC Recovery Afterburner Installation

    HAZARDOUS WASTE HANDLING INDUSTRY: Conducted on-site GC speciation of VOC constituents by Method 18 collecting samples continuously around-the-clock in large vacuum canisters in order to demonstrate compliance control of a VOC recovery/afterburner installation

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Premium

    Waste Sorting - Commercial Waste Sorting / Industrial Waste Sorting

    Traditional manual or semi-automated techniques, however, are only able to recover low levels of separate materials from commercial and industrial waste streams. In contrast, TOMRA’s fully adjustable, state-of-the-art, senor-based sorting and recycling systems convert complex and varied commercial and industrial streams into high quality, separated output. The systems also make manual picking unnecessary, thus reducing labor costs and material loss, while increasing the efficiency of commercial waste recycling. Operationally, through using detection techniques such as near infrared (NIR), x-ray transmission (XRT), visual spectrometers (VIS), color line cameras and metal sensors in combination, the systems offer: - High recovery rates - High throughputs - High purity levels - Speedy return on investment - Low running costs - Advanced recognition capabilities (material, color, atomic density etc)

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Air pollution control for the waste gasification industry

    Processes that create a synthetic gas (syn gas) in a gasification process for waste reduction, electricity generation, or steam production (CHP – combined heat and power processes) – commonly benefit from custom heat recovery systems.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Waste Compaction for the Manufacturing Industry

    HSM has a wide range of balers for use in industrial and manufacturing settings. Many materials including, cardboard, paper, plastic packaging, PET Bottles/other rigid plastics and drinks cans can be successfully baled using one of HSM’s high specification balers.

    All of the models within HSM`s range of industrial balers are used for baling recovered recyclable materials into bales suitable for transporting to a recycling facility for processing. HSM balers for use in industrial or manufacturing settings are designed to allow maximum flexibility of working for the operator in that they can function on their own or as an integral part of a wider recovery system.

    Whether it’s a vertical, horizontal or fully automatic, channel baler that is required, HSM has a range of solutions for every location, and able to fit in to the available space.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Complete solutions for the recycling industry

    For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Industrial shredders for WEEE/cables industry

    Since 2003 in Europe, the professionals of the sector of the electric and electronic components must organize dies of recovery, recycling or valorization of their called worn products WEEE (Waste Electrical and Electronic Equipment). Before the evolution of the legislation, Préciméca proposes since 1998 a machine (range 01-02) for the treatment of electronic cards. Large electric household appliances (ranges 50-02, 14-02, 17-02) with the Small household products (14-02, 12-02) to the data-processing components, you will find at Préciméca the machine adapted to your needs.

    By PRECIMECA Environnement based in Toulouse, FRANCE.

  • Premium

    Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you