Only show results available in Virginia? Ok

industrial waste technology Applications

  • Evaporators technology for waste & recycling industry

    The leachate produced by the waste in the landfill is an extremely pollutant effluent that requires high effective treatment processes to comply with the very strict limits for discharging operations. EVALED evaporators are a technological solution which allow to exploit the biogas cogeneration for the full or partial power supply of the plant within the limits of the environmental regulations and to reduce the relevant costs for thermal energy and leachate disposal.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Waste shredding for the waste-to-energy industry

    With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Waste recycling systems for commercial & industrial

    Kiverco specialise in the design, manufacture and installation of Commercial and Industrial waste recycling systems. We can offer a bespoke recycling plant that is tailored to meet your unique C & I recycling specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your C&I recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Premium

    Biogas recovery for waste to energy industries

    HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Premium

    Complete solutions for the recycling industry

    For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Waste gas treatment for the LED industry

    Market analysts predict sustained growth in demand in the LED industry. After LED backlighting for the small LC displays of mobile phones and the LC displays of larger screens in the television market, the next potential growth market is the lighting industry: Sales of LEDs in this market in 2012 are almost USD 3.5 billion – thus nearly doubling since 2010. Analysts are expecting a growth of more than USD 7 billion in 2014 and believe that the total market for LEDs should peak at USD 17.7 billion.* A mass market of this scale for LEDs also means increasing emissions that need to be abated by specific waste gas treatment systems at the point of use. In the manufacture of products based on innovative light emitting diode (LED) technology, ammonia and hydrogen are used in large quantities as process gases. The environmental engineers at DAS have recognised this market trend and developed new solutions such as LARCH for waste gas treatment in MOCVD processes.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Premium

    Industrial shredders system for metal shredding sector

    Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.

    By WEIMA based in Ilsfeld, GERMANY.

  • Environmental technology for water treatment industry

    In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Waste gas & wastewater treatment for the solar industry

    Generating solar energy is considered `green technology`, even though the production of solar cells based on silicon predominantly uses process stages that have been common practice in the semiconductor industry for many years. As in the semiconductor industry the production of solar cells employs dangerous and environmentally harmful substances, which require abatement according to legal provisions. The production of photovoltaic cells therefore is subject to strict requirements for treatment of waste gases and wastewater. Solutions need to be easy and cost-effective. The contaminated wastewaters and waste gases should, under no circumstances, lower performance, endanger the health and safety of humans, or otherwise negatively affect the availability of production facilities. The safety of the production line must be guaranteed at every step and in every operating situation.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Industrial water treatment for the mining industry

    Water is indispensable for the mining industry. Water is both in the process and also generated by the process. Controlling the quality of the water and treating the waste waters for reuse is essential to this industrial market. Aquatech, a global water treatment leader, has more than 30 years of expertise in industrial water treatment solutions. Our wide range of technologies, services and knowledge can help solve the water issues for the mining industry.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Industrial shredders system for destroys data shredding inddustry

    It is imperative confidential data, in the form of paper or computer hard drives, remains confidential – forever. Any reconstruction must be impossible – to preserve confidence or to fulfill statutory provisions. In this field WEIMA is your partner of trust!  In order to select the optimum model and rotor for your application an indepth discussion is essential to establish the correct application of shredding technology. WEIMA shredders process all kinds of files: documents, treasury notes, swipe cards, information on Compact Discs, DVD’s, hard drives, footage or tape. Depending on security level or granulate size, the material can be shredded in a single-stage or two-stage process.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Biological waste water treatment plants solutions for the chemical industry

    In addition to the food industry, biological anaerobic and aerobic technologies can be applied in the chemical and pharmaceutical industry as well.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • Premium

    Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Product and services for industrial - refineres industry

    For industrial customers, we offer cost-effective and environmentally attractive alternatives to oxidize, precipitate, segregate and remove unwanted pollutants, contaminants and by-products from waste streams and industrial processes. Whether using our time-proven CAIROX®, AQUOX®, and LIQUOX® permanganate-based products, our manganese based CARULITE® catalyst, or any of our other newly developed technologies, our long history and unmatched experience and environmentally friendly expertise provides customer specific solutions to many diverse industries.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Premium

    Wastewater treatment for the metal industry

    Wastewater and process water treatment in the metal industry. Industrial waste water or circuit water in the metal industry can be broken down into many comprehensive, subject-specific areas. AWAS has developed various methods of treatment technology for the metal industry in the last 30 years. Generally we accept any environmental challenge and like to respond to individual problems.

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Premium

    Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Recycling and processing of shredder heavy fraction

    Since 1991, the bi-directional dense medium separation technology for the recycling of automobile and industrial wastes is being used. For many years a principle client in this regard has been the Group Galloo.  Group Galloo owns currently 50% of the AD REM shares. At first the Galloo staff was not convinced that a carrot separator could compete with the classical dense medium separators on the market at that time. So they set up a trial on +12 mm automobile shredder residue, running half of the test material through a conventional drum and the other half through this modified bi-directional carrot separator.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you