TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.
By TIGG, LLC
based in Oakdale, PENNSYLVANIA (USA).
Reliable treatment. Optimised for heavily contaminated landfill leachate. Whether it be household rubbish, construction rubble, contaminated soils, port sludge or waste incineration ash, final storage of these heavily contaminated materials poses a potential groundwater pollution risk from heavy metals, nitrogen bonds or organic substances. Landfill leachate resulting from precipitation on landfill sites.
Using innovative recycling technologies in vibratory grinding processes. Rinse water from vibratory grinding processes ca be contaminated with heavy metals, oils and, depending on the process, even a variety of chemicals. It cannot be discharged into the public sewer system, and usually requires to be disposed of with specialized waste management companies expensivly. But there are alternatives: Vacuum distillation with VACUDEST evaporators is an economical, resource-friendly method for treating this industrial...
Wastewater treatment processes considered for this industry must address industry specific nuances like slug discharges of pulp, stormwater runoff and air emissions for compounds such as total reduced sulfur (TRS)
The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for...
Companies in the food industry need large amounts of water – as an ingredient of their products, but also – in large amounts – for the production process and for the cleaning of raw materials, machines and equipment. Water cleans, washes and is processed. Using this essential resource carefully helps to reduce costs. The biological wastewater treatment process by DAS Environmental Expert enables companies to recycle usage water and therefore lower overall consumption.
Water is widely used in industry, whether it is encountered as raw water, process water or waste water. Very often this water must be treated before entering the process to ensure its quality and properties will meet the specifications demanded by the industrial process. In addition, with recent discharge regulations and policies towards zero liquid discharge, there is a high demand for solutions for recycling and reuse of waste water produced. Lenntech provides sustainable and complete solutions for water and...
Water is one of the most important raw materials for industrial production. For this reason, processes are now used in water treatment that not only produce the required water quality, but also allow for recycling. The treated water can either be fed back into the process, or reused for other purposes. Water recycling plants lead to a significant reduction in operational costs for production.
When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment chemicals.
Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Recycling is a major source of copper in the modern world. A combination of economic and regulatory factors are now at work to make metal recycle and water reuse very attractive.
The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse...
There are many cleaning applications in textile manufacturing and industrial textile laundering. In textile factories, manufacturing equipment, accessories, water recycling system filters, and wastewater filters must all be cleaned and maintained in order to keep the plant running efficiently. Minimizing downtime, by using the safest, most economical and environmentally friendly products that clean effectively, is critical. Returning filter system flux rates back to 100% is also important and can be accomplished...
spot free car wash rinse
manufacturing and process plants
storm water recycling
whole house filter
QUA’s CeraQ ceramic membrane modules
are designed for challenging water and
wastewater applications. The CeraQ
modules consist of 3.5 mm ID ceramic tubular
elements potted into bundles for various
surface area requirements. The module is
capable of removing virus, bacteria, colloidal
matter, submicron or micron sized suspended
particles, oil and organics from a wide range
of fluids, including drinking water and
industrial wastewater to economically meet
variety of treatment objectives or to recycle
As devices get smaller and the fabrication plants get larger, the purity of the water required for ultrapure water systems increases. In terms of water reuse, the industry has relatively conservative attitudes towards recycling water for ultrapure water applications, but wastewater is treated and reused for cooling and other less critical purposes. Besides semiconductors, two other silicon-based sectors of the microelectronics industry need large volumes of highly pure water: flat panel displays (FPD) and photovolt...
A municipal wastewater industry customer approached Heron Innovators with a need to run a treatment system pilot test. We placed our Model SAF125 Suspended Air Flotation (SAF) pilot trailer at the customer’s Sacramento, California biosolids recycling facility for three pilot runs. The pilot test runs provided data enhancing the performance of their digested sludge centrifuge operation. The pilot trailer thickens digested sludge from the treatment plant prior to the centrifuges. This advanced system is...