Only show results available in Virginia? Ok

industrial water analyzer Applications

  • Premium

    Water Analyzing for the Mining Industry

    As a primary industry, the mining industry faces the needs for optimizing the management of its resources. Exploration and excavation activities should be as efficient as possible. Companies also aim to maintain water resources while at the same time controlling the environmental impact of their activities. As pioneers in exotic mining analytics, AppliTek can help you with a selection of application-oriented analyzers, from portable XRF systems to on-line analyzers for water and process applications.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Oxygen Permeation Analyzers & Water Vapor Permeation Analyzers for Packaging Industry

    Systech Illinois` comprehensive permeation range includes the recently acquired Lyssy and PermMate product lines which offer precision oxygen and water vapor analysis of packaging film barriers.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Biofuel Analyzing for the Bioenergy Industry

    AppliTek has already developed the necessary tools to measure and control on-line the production, in case the futur is in favour of biofuels. For biodiesel, the following quality indices should be monitored, on order to comply with international legislation on biofuel QC:

    Free fatty acids - Calcium & Magnesium - Total Phosphorus - Potassium - Moisture (water content)

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Environmental Control for the Water Utility Industry

    This section contains applications relevant for compliance, water treatment, drinking water and natural sources.

    Collecting, treating and distributing water to consumers and industry, in compliance with quality standards, means a challenging task to water companies. Both private as public water treatment entities have to manage carefully and sustainably their sources, processes and even distribution networks. AppliTek supports them not only with an extended portfolio of analyzers but also with its experience in the advice, design and construction of complete monitoring systems and stations.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water Monitoring for the Pulp & Paper Industry

    In the field of quality control and process control, AppliTek has developed a unique set of specific monitoring solutions in order to meet the ever-increasing demand for cost efficient paper production. Traditionally, AppliTek is also your one-stop shop for on-line analyzers with regards to environmental compliance.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Online Monitoring for the Wastewater Treatment Industry

    AppliTek`s large portfolio of on-line analyzers enables you to monitor precisely the complete treatment process, from influent to effluent. Compliance with discharge regulations is another application example and typically expressed as sum parameters, for which AppliTek has unique solutions.

    For more information, please check the detailed section in this website on these topics:

    By AppliTek NV based in Nazareth, BELGIUM.

  • Water quality monitoring systems for feedwater, storm & condensate industry

    The most important parameters in Water/Steam Cycles such as Cation conductivity, dissolved oxygen and pH are available as pre-assembled and factory tested units. Dedicated analyzers for sodium, silica, phosphate and hydrazine are also factory tested and calibrated for immediate operation.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Permeability Testing of Medical and Pharmaceutical Packaging Industry

    The measurement of oxygen and water vapor permeation is often critical in medical and pharmaceutical applications; to prevent contamination, to extend the shelf life and potency of drugs and to ensure powders do not clog. Systech`s permeation analyzers and corresponding software conform to 21CFR Part 11.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Industrial process and environmental monitoring

    Laser Gas analyzer Oil refining, CO, CO2, O2, CH4 Ethylene cracking CO, CO2, etc. EO/EG, PE/PP, O2, C2H4, etc. Ethyl benzene/styrene monomer/PS, O2, CO/CO2, Trace water in the benzene PTA, CO, CO2, O2 Coal gasification O2 Mathanol/ammonia/urea O2, CO, CO2, NH3, etc. Chlor-alkali/PVC H2O, O2, CO2, C2H4, etc Sulphuric acid O2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, containment ponds and remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Measuring Fats, Oil and Grease (FOG) in Wastewater

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Laser detection solutions for water-quality monitoring

    The technology of Spectral Fluorescence Signatures (SFS) is a very sensitive and selective tool to monitor many industrial processes on site and in real-time. The SFS analyzer series – SFS-Scanner and Instant Screener spectrofluorometers - are capable of detecting target substances even in complex mixtures without any pre-treatment of the samples.

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you