Only show results in Virginia? Ok

industrial water filtration system Applications

  • Premium

    Filtration technology for Rainwater harvesting industry

    AQQA can produce drinking water quality from rainwater. THE AQQA TECHNOLOGY IS USED IN RAINWATER SYSTEMS TO: remove all particles and sand. remove bacteria and virus. remove parts of plants.

    By Weise Water GmbH based in Hennigsdorf, GERMANY.

  • Industrial and commercial water filtration for municipal & industrial waste water

    Whether your specific water usage is for Industrial, Commercial or Municipal purposes all application have one thing in common-waste.  Hydro-Gen’s range of industrial/commercial water filtration systems suit a wide range functions allowing you to reduce overall water and industrial waste-water disposal costs.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial and commercial water filtration for heating / cooling systems

    Heating or cooling systems, conventional or alternative, involve water. Over time that water picks up particles which in extreme cases can silt up entire heating systems, requiring expensive maintenance, repair or even replacement. A build-up of solids no thicker than a human hair inside pipework can reduce heat transfer by up to 30%, drastically reducing efficiency and increasing energy consumption.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Industrial and commercial water filtration for canal/river/sea water filtration

    When considering filtration methods, many industries use alternative water sources such as river, borehole, canal or sea-water extraction as a low cost solution for cooling water and various other operations on-site. Although water extraction is a low cost option the water can be of low quality and can cause problems and damage to the system, meaning more resources, time and expense in fixing the problem.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial and commercial water filtration for energy reduction

    It is important in all sectors these days that companies look for energy reduction when it comes to water filtration, as they would look at reducing their carbon footprint. The correct water filtration system can not only assist with reducing water and carbon footprints, but can also reduce costs and increase efficiency and output.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Premium

    Water filtration systems for heap leaching in the mining industry

    AZUD solutions to heap leaching in the mining industry. The more than 30 years of experience as manufacturers of emitters and filtration systems have permitted the adaptation of our products to the requirements of the mining sector. We have developed lixiviation projects of materials such as gold, silver, copper, nickel or zinc in Europe and South America. AZUD technology gives value-added in the lixiviation processes, maximizing the extraction of the pile.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Industrial Meshes for Precoat Filtration / Precoat Filter Systems

    SolidWEAVE metal wire mesh has been used successfully for decades in systems for precoat filtration. High-tensile mesh constructions made of PZ-Microdur, KPZ-Microdur, YMAX® and Plain Dutch Weave form the basis for the long and trouble-free operation of precoat filter systems because they were specifically designed for the high mechanical demands of precoat filters.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Premium

    Filtration solutions for on-site treatment industry

    Filter beds with pre-filter are simple, efficient and environmentally friendly ways of treating domestic wastewater from detached houses and holiday homes. The requirements related to operation and maintenance are few in relation to traditional compact plants. These systems can also be adapted to suit clusters of houses, schools, kindergartens, small companies etc.

    By Filtralite - Leca Norge As based in Alnabru, NORWAY.

  • Premium

    Filtration technology for Industrial wastewater treatment

    AQQA is used in industrial wastewater treatment to: separate the sludge from the clear water in membrane bio reactors. constitute the final filtration of the effluent of standard sewage treatment plants (tertiary treatment). keep specialized bacteria in the system, that can biologically degrade organic matter. enable Zero Liquid Discharge: prefiltration for reverse osmosis systems.

    By Weise Water GmbH based in Hennigsdorf, GERMANY.

  • Industrial and commercial water filtration for reverse osmosis plants

    Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be stopped until the system is repaired.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial and commercial water filtration for bore-hole intake

    When considering filtration methods, many industries use alternative water sources such as river, borehole, canal or sea-water extraction as a low cost solution for cooling water and various other operations on-site. Although water extraction is a low cost option the water can be of low quality and can cause problems and damage to the system, meaning more resources, time and expense in fixing the problem.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial and commercial water filtration for effluent water treatment

    Through experience we have found that when the correct water filtration system is put into place as an integral part of the effluent water treatment process our customers have been able to experience several benefits:- Enabled water to be re-used in other areas of their operations as part of the effluent treatment process.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial water Ammonia & Arsenic removal from water

    Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin that has been saturated with Ammonia ions (and some calcium and magnesium ions)moves into a one-bed displacement zone with softened water to ensure hard water does not cause precipitation within the multi port valve.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Water treatment solutions for the mobile units industry

    Nowadays, drinking water is still not available for all the population. The development of mobile units makes possible the supply of drinking water to remote areas. We can design sand filtration systems adapted to specific demands for containerized water treatment plants

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • Chlorine Dioxide Water Treatment for Reverse Osmosis Membranes Industry

    Biological fouling of reverse osmosis is a common problem leading to reduced efficiency and reduced membrane life. CleanOxide Liquid 75 is pure Chlorine dioxide which is a highly effective biocide ideal for use in reverse osmosis systems. CleanOxide Chlorine Dioxide has all the important regulatory approvals in Australia and overseas to be used in water treatment and food processing. Many strategies have been developed in an effort to control biofouling of Reverse Osmosis membranes including the use of sodium hypochlorite, non-oxidising biocides, heat and pH swings.

    By NW Solutions based in Perth, AUSTRALIA.

  • Water removal filtration

    SAF is the key component for a wide range of enhanced nonwoven filter media fabrics that are designed for the removal of water and particulates from aviation fuel, automotive diesel and a wide range of oils. Such fabrics help reduce problems associated with water contamination in such situations. Its versatility gives rise to cost savings over traditional cellulosic-based absorption media, while offering full compliance potential to stringent international filtration standards – particularly in the aviation fuel and hydraulic oil markets. Applications: A significant reason for the majority of oil and fuel system failures is the presence of high water levels in dissolved, dispersed and free water. SAF-based filter media fabrics can remove both dispersed and free water to very low ppm levels at industry leading rates. This leads to reduced fuel and oil degradation and provides the required filter quality for efficient machine operation.

    By Technical Absorbents based in Grimsby, UNITED KINGDOM.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you