Only show results in Virginia? Ok

industrial water quality Applications

  • Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for environmental industry

    Maintaining the quality of natural waters provides numerous economic benefits by preventing severe deterioration of water resources that would require expensive treatment operations to protect public health and the environment. For instance, monitoring nitrates in surface waters can possibly prevent algal blooms from happening by facilitating the necessary steps to stop pollution sources from discharging nitrogen nutrients into the water system.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for textile industry

    Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for chemical industry

    Chemical plants that produce high quantities of phenols (plastics, pesticides and pharmaceutical industries) and other aromatic organic compounds are excellent candidates for wastewater characterization via spectral analysis. Chemicals that contain conjugated double bonds absorb UV radiation remarkably well. The benefits include higher precision in process control as well as optimization of wastewater treatment.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring systems for feedwater, storm & condensate industry

    The most important parameters in Water/Steam Cycles such as Cation conductivity, dissolved oxygen and pH are available as pre-assembled and factory tested units. Dedicated analyzers for sodium, silica, phosphate and hydrazine are also factory tested and calibrated for immediate operation.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring for municipal wastewater industry

    Real Tech’s analyzers can be used in municipal wastewater treatment applications to ensure environmental compliance and to increase process efficiency by continuously monitoring the incoming loads and making process adjustments accordingly to optimize aeration rates, and nutrient and chemical dosing.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for pulp & paper industry

    Pulp and paper waste streams are exceptionally well suited for spectral analysis due to the high concentration of UV/Vis light absorbing organics in their process water and waste streams. Continuous monitoring of the organic load by means of COD/BOD correlations will help ensure the treatment process is carried out in the most efficient way possible by optimizing aeration rates and nutrient dosing while also making sure that all the regulatory goals are met.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Water quality monitoring systems for high water purifier industry

    The monitoring of “Ultra Pure Water” or “High Purity Water” requires the lowest possible detection limits for process analyzers. Resistivity is often around 18 MΩ. Dedicated instruments can detect infinitely small amounts (ppt e.g. parts per trillion) of ions.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring for municipal drinking water industry

    Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring systems for pharmaceutical industry

    The monitoring of “Purified Water” of “Water for Injection” in the pharmaceutical industry is highly regulated. These instruments comply with the highest pharmacopoeia standards.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Water quality monitoring for food & beverage industry

    Wastes that are rich in starch such as those that occur in potato processing industries require a balanced addition of other macronutrients such as nitrogen and phosphorus. In order to optimize the dosing of these nutrients it is essential to have a good idea about the organic load entering the biological treatment reactor. Measurement of colour can help with quality control and flavour consistency.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring for brewery industry

    Monitoring process streams and waste streams continuously in a brew house can provide many benefits to operations. Monitoring product in process for color or concentration provides consistency and quality measures. Product loss can be quantified by monitoring waste streams. Processes can be improved to increase efficiency and minimize effluent waste. Effluent waste streams can also be monitored for organic loading with BOD and COD correlations to ensure compliance for discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Industrial water treatment for the mining industry

    Water is indispensable for the mining industry. Water is both in the process and also generated by the process. Controlling the quality of the water and treating the waste waters for reuse is essential to this industrial market. Aquatech, a global water treatment leader, has more than 30 years of expertise in industrial water treatment solutions. Our wide range of technologies, services and knowledge can help solve the water issues for the mining industry.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Industrial valves solutions for the water & wastewater industry

    Whether during the transport or treatment of municipal or industrial wastewater, or during the production and treatment of drinking water - valves and actuator technology by EBRO are uncompromisingly made for these applications. The range covers butterfly and check valves as well as knife gate valves for the use with very dirty fluids. All used materials - from the body over elastomers to the smallest screw - comply with the rules of the DVGW and are accordingly admitted. Hence valves by EBRO make their contribution to the preservation of water quality from the abstraction to the delivery for the end user.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Premium

    Water quality monitoring for the groundwater monitoring industry

    The reasons for testing water quality in groundwater are numerous. Monitoring water quality and conducting tests is a good way to gather data on aquifer hydraulics. It can also be used to monitor parameters such as rhodamine, which helps to understand movement of underground water. Human activities can have an impact on groundwater quality, and conducting tests in this field can help to track these effects. Leachate from landfill and fertiliser can both find their way into groundwater. It is important to monitor these pollutants and to test the quality of groundwater, as it helps to identify and mitigate potentially harmful conditions.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Premium

    Treatment of Process Water within Industry

    Water is used for a wide variety of purposes in industrial production. Water has to be treated, so that sufficient amounts are available in the quality required for production. Process water must generally be re-treated after it has been used, so that it can either be discharged according to regulations or returned to the water cycle.

    By EnviroChemie GmbH based in Rossdorf bei Darmstadt, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you