Only show results in Virginia? Ok

inspection system Applications

  • Taxiway Inspection

    RoadScan system uses air-launched horn antennas, providing a method for data collection at highway speeds and eliminating the need for lane closures. It is now possible for transportation professionals to collect hundreds of miles of pavement layer thickness data in just one day.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Construction Xray Inspection

    A non destructive test for concrete plays a central role in determining the quality of cement casting. Bubbles and sediment in the cement weaken the construction considerably. NDT testing equipment is also used in construction to determine the quality of the wired foundations. One of the challenges of construction NDT is the possible difficulty in reaching testing locations. A non destructive test for concrete conducted with a portable digital radiography system provides an excellent inspection tool. Combining mobility with phenomenal penetration capabilities and the highest quality digital radiology imaging, Our portable X-ray inspection systems provide a comprehensive solution to construction NDT technicians.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Powerline - Commline Inspection

    Radiographic NDT testing of a power line is no simple matter. The power line`s electric cables need to be inspected for wear and tear as a routine procedure. Elevating the radiographic NDT equipment to the necessary heights presents a serious problem. Our digital portable radiography systems combine high mobility with cutting edge X-ray technology. Highest quality images are created upon request and are immediately available on screen for analysis. The excellent resolution and dynamic range combined with advanced but user-friendly software are the key to the comprehensive field radiographic NDT solution that we offer.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Casting Inspection

    Non destructive test methods are highly effective in the detection of casting defects which are not always visible on the surface. X-ray is a well-known tool for casting quality control. Digital radiography technology takes these tests to the next level. Excellent resolution and dynamic range enable NDT technicians to see the smallest bubbles and the tiniest of cracks. Non destructive test methods employing portable Digital Radiography systems can serve as an efficient solution in facilities that require both laboratory and onsite inspection.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Video Inspection of Drilled Shafts, Piers, Caissons

    Allegheny Instrument's GeoVISION borehole video camera inspection systems are used to visually inspect drilled shafts, caissons, piers. Downward view, side view, and pan and tilt options.

    By Allegheny Instruments, Inc. based in Williamsville, VIRGINIA (USA).

  • Premium

    Track and Trace and Inspection Solutions for the Aviation Industry

    Airlines and airports want to reduce regulatory risk. IMEC Technologies provides waste management and inspection solutions to the aviation industry that help ensure you comply with regulations while increasing traceability and improving the efficiency of waste and equipment management. Our HazMat T&T Waste Tracking solution helps you meet regulatory requirements governing the management and disposal of waste. Our inspection system Inspector T&T helps you monitor and audit safety equipment at your facility.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Premium

    Track and Trace and Inspection Solutions for the Pharmaceutical Industry

    IMEC Technologies provides inspection, track and trace, materials management and automated identification solutions for the pharmaceutical industry. Pharmaceutical customers include Pfizer, GlaxoSmithKline, Bristol-Myers Squibb and Elan. Our inspection system Inspector T&T helps you improve equipment effectiveness by monitoring and auditing equipment at your facility. Our Navigation materials management solution helps you improve overall process efficiency by tracking the movement of materials throughout your production process. Our HazMat T&T Waste Tracking solution helps you meet regulatory requirements governing the management and disposal of waste generated by your production processes.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Video Inspection of Monitoring Wells

    GeoVISION borehole video camera systems are used to visually inspect monitoring wells.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Premium

    Track and Trace and Inspection Solutions for the Chemical Industry

    IMEC Technologies provides inspection, track and trace, materials management and automated identification solutions for the chemical industry. Our inspection system Inspector T&T helps you monitor and audit equipment at your facility. Our HazMat T&T Waste Tracking solution helps you meet regulatory requirements governing the management and disposal of waste generated by your production processes. Our Navigation materials management solution helps you improve overall process efficiency by tracking the movement of materials throughout your production process.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Premium

    Track and Trace and Inspection Solutions for the Food Industry

    IMEC Technologies helps companies like Kerry Group and the Musgrave Group to monitor equipment and track materials in their food processing operations. There is an increasing focus on food safety and a growing body of regulations in the food industry. Inspections and monitoring are a key part of ensuring you meet those regulations. IMEC Technologies provides inspection, track and trace, materials management and automated identification solutions for the food processing industry. Our inspection system Inspector T&T helps you monitor and audit equipment at your facility. Our HazMat T&T Waste Tracking solution helps you meet regulatory requirements governing the management and disposal of waste generated by your production processes. Our Navigation materials management solution helps you improve overall process efficiency by tracking the movement of materials throughout your production process.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Premium

    Track and Trace and Inspection Solutions for the Medical Device Industry

    IMEC Technologies provides inspection, track and trace, materials management and automated identification solutions for the medical device industry. Our inspection system Inspector T&T helps you monitor and audit equipment at your facility. Our HazMat T&T Waste Tracking solution helps you meet regulatory requirements governing the management and disposal of waste generated by your production processes. Our Navigation materials management solution helps you improve overall process efficiency by tracking the movement of materials throughout your production process.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Monitoring Well Inspection With 3/4-inch Video Camera

    Allegheny Instrument's Nano downhole camera is used to visually inspect groundwater monitoring wells from 1-inch diameter and larger to depths of 1,000 feet with the Heavy Duty hand reel system and depths of 2,000 feet with the Deluxe motorized winch.

    By Allegheny Instruments, Inc. based in Monterey, VIRGINIA (USA).

  • Premium

    PEHD membrane sealing systems for landfill base liners

    There are several phases of preparation of landfill base liners, starting with the positioning of the membrane, until these can be covered with several metres of refuse. These membranes may be damaged during preparation, but can also be inspected and repaired. It is advisable to undertake inspections at regular intervals.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Dams and Dikes Structural Health Monitoring Systems

    The control of a dam requires a wide range of important information coming from the sensors, which are of vital importance for the life of a dam. Engineers in charge can take specific and sudden decisions for a correct control of a dam`s reservoir, body and foundations. However, monitoring is not only carried out by sensors, but it also involves direct or remote visual inspection as well as topographical measuring.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Dust Collector Cartridge Filter Cleaning

    The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism requires 80 cfm of compressed air at 80-100 psi to function properly. How it Works Easy-to-load, cabinet lid forms seal Automatic and programmable cleaning cycles take 3-5 minutes to complete Injection Self-Cleaning System (ICS-360) blows particulate off every part of the filter Dust and debris drawn out by a powerful cyclone collector and safely stored in a 55 gallon drum Optional Filter Inspection Station and Diesel Filter Inspection Station can be used to measure restricion levels and filter integrity Features Injection Self-Cleaning System (ICS-360) ? Adjustible for diverse filter diameters and heights ??User Friendly Controls with LCD status display? Cyclone - 1,400CFM @ 4` static pressure 55 gallon dust barrel included

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Diesel Air Filter Cleaning

    HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for inner Diameter Filter Outer Diameter: 20` Maximum for outer Diameter Filter Height: Up to 32` High – closed one end or open at both ends (Other sizes Available – Contact Mfg. For Details) Injection Cleaning System HOW THE INJECTION SELF-CLEANING SYSTEM (ICS) WORKS The Injection Self-Cleaning System releases compressed shop air through a rotating air jet that is driven up and down in a spiral motion inside the filter cartridge. In order to maintain the cabinet clean, an air pu

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Cloud software solutions for fleet operators using fuel

    The top run fleet operators use Titan software to get them down the road more efficiently. Whether it`s monitoring tank alarms in real-time, optimizing inventory across a network of both USTs & ASTs, or more efficiently managing fuel-system compliance, Titan makes heroes of fuel and environmental managers in the rent-a-car and transport industry. For starters, Titan mitigates your core environmental risks, arming you with a central dashboard and effective management tools that keep you on top of it all. This includes ATG alarms, release detection data, testing results, inspections, NOVs, and environmental-related forms, photos, and documents. Next, we hand over the key to responsible ATG network management, with on-demand tank inventory and remote gauge configuration to ensure you can effectively optimize your in-ground and above ground fuel. Finally, Titan streamlines your maintanance and work order process, linking you with site-level employees, techs, vendors, and field team members to centrally manage all facility requests in one system. In short, Titan software helps you run a better, more efficient rent-a-car or commercial fleet operation.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you