iron removal Applications available in Latin America

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Advanced water treatment equipments for hydrogen sulfide removal

    The presence of hydrogen sulfide in home drinking water supplies is not a health hazard, but is a common nuisance contaminant whose distinctive `rotten egg` odor makes water treatment desirable. Several treatment methods are available, and often hydrogen sulfide can be treated and removed using the same process and equipment used for iron and manganese removal.

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    Magnets for the ceramic and powder handling industry

    Powerful magnetic separators for the removal of tramp metal from raw materials and for removal of fine iron from ceramic slips and glazes. High intensity electro magnetic filters give maximum levels of purity.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Customized Solutions for groundwater treatment industry

    WesTech offers a wide variety of solutions for groundwater treatment for potable use. Whether your treatment objective is gas removal, iron & manganese removal, color removal, softening or even filtering a source under the direct influence of surface water, WesTech has your solution.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Water treatment

    Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer....

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Advanced water treatment equipments for deionization

    Deionized water, also known as demineralized water (DI water or de-ionized water; can also be spelled deionised water), is water that has had its mineral ions removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionization is a physical process which uses specially-manufactured ion exchange resins which bind to and filter out the mineral salts from water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that...

    By Advanced Equipment and Services based in Hollywood, FLORIDA (USA).

  • Premium

    Municipal Solid Waste (MSW) Recycling

    During recent years, the importance of alternative energy sources has become increasingly apparent. With the Eldan Recycling System for MSW (Municipal Solid Waste), you can turn loose, baled or bagged waste like non-recyclable plastics, paper cardboard, mattresses, carpets, etc. into energy in the form of RDF (Residual Derived Fuel). RDF exploits the energy content of the traditional household waste (MSW) to substitute traditional fuels, thus posing an alternative that is attractive both environmentally and...

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Solutions for oil & gas industry

    In crude oil refining, our technologies are successfully applied during plant turnarounds to remove pyrophoric iron sulfide scale, reducing the threat of exothermic reactions and toxic sulfide odor production.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Natural gas gathering system for inlet gas separation

    Natural gas gathering systems deliver large volumes of gas via pipleline to the central inlet of the gas processing facility. Removal of solid contaminants and free liquids present in the inlet gas is critical to the downstream process. Iron oxides, iron sulfides, dirt and other deformable particles can flow into the processing system. Effective removal of these contaminants is needed to prevent fouling. Pentair Porous Media technologies will help with a clean, natural gas feed, reducing upsets and associated...

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Industrial water demineralisation

    Deionized water, also known as demineralised water, is water that has had its mineral ions removed, such as cations like sodium, potassium, calcium, magnesium, iron, and anions such as chloride, nitrate, sulfate, bicarbonate and even silica. Deionization is a chemical process that uses specially manufactured ion exchange resins which exchange hydrogen ion and hydroxide ion for dissolved minerals, which then recombine to form water. Because the majority of water impurities are dissolved salts, deionization...

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Disposal wells treatment for oil and gas industry

    Treating the water being injected for disposal is not always considered by operators. This is likely costing you money in the long run. Removing iron, heavy metals, and treating out ammonia is a benefit to treating with MIOX’s mixed oxidant solution. While these are benefits of the technology, the most important is the elimination of bacteria which can cause Hydrogen Sulfide (H2S), corrosion pitting, poor injectivity and other problems, resulting in great well workover frequency. Treating injection wells...

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Industrial water Nickel & Cobalt purification

    Cobalt is a brittle, hard transition metal with magnetic properties similar to iron. It is mainly used as an alloy with iron, nickel or other metals to produce corrosion and wear resistant products for high temperature applications (such as jet engines, gas turbines, etc.). Cobalt is normally produced as a by-product of nickel or copper mining. The purity requirements for Cobalt do not allow nickel to exceed a concentration 0.1%. Earlier, the nickel was removed by lime precipitations, but as the market specificatio...

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Scrap Shear 600T/1000T/1500T

    Capable of Daily 24 HRS Operation - 1000T Model Capacity of Light Scattered Scrap Iron - Over 20t/hr - Economical & Versatile for wide range of scrap types - High Efficiency Performance - Capable of Daily 24 HRS Operation - Cylinders Remove & Repair : No Need - Blade Clearance: Adjustable - Built-In Steel Oil Pipes – No damage by outer force - Cylinders - SGS-CE Qualified - Advanced Technology Applied - Top & Side Pre-Compressing Process - Cycling Auto-Cutting: Only one operator required - Excellent Capacity...

    By Hua-Wei Machine Taiwan based in Taipei, TAIWAN.

  • Gas/Liquid and liquid/liquid mixing for air stripping applications

    The growing demand placed on the world’s water, in combination with more stringent water quality regulations, have placed unprecedented demands to provide safe, reliable and aesthetically pleasing drinking water. Air stripping is an effective way of removing volatile organic chemicals (VOCs) from contaminated water and is commonly used for this application. Air stripping systems mix air with a water supply with the goal to generate the largest possible air-water contact area so that VOCs and dissolved...

    By Mazzei Injector Company, LLC based in Bakersfield, CALIFORNIA (USA).

  • Soldering Fume Extraction

    Soldering fumes are Unbreathable. Soldering enables the joining of metal parts by melting a filler metal to attach wires and other metallic components. The fumes generated from melting solder especially solder containing Lead or Tin present are dangerous and require local ventilation to remove harmful smoke from the work area. Soldering application need to be properly ventilated to prevent toxic fumes from reaching the worker`s breathing zone. There are a number of different industries such as the electronics...

    By Diversitech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you