Only show results in Virginia? Ok

laboratory manufacturer Applications

  • Laboratory equipments for core analysis using NMR

    Until recently, a high level of expertise and knowledge of the principles and practice of NMR has been needed to perform NMR core analysis. Consequently, NMR core analysis has been confined to a relatively small group of Special Core Analysis Laboratories. Now, a partnership between Oxford Instruments and Green Imaging Technologies brings new hardware and software, with improved performance, to enable any core analysis laboratory to generate the petrophysics values that the industry needs without the requirement that every dataset be analysed by an NMR expert.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Laboratory instruments solutions for surface finishing industry

    The coating and finishing of surfaces using electroplating techniques is a highly sophisticated process. Be it the finishing of metal parts or the coating of printed circuit boards, the quality required in the intermediate and end products is only achieved if the composition of the process baths is right. At the same time, rising costs of raw materials and energy make it absolutely essential to drive production as efficiently as possible. As a leading manufacturer of instruments for chemical analysis we know about the challenges of coating and finishing of surfaces using electroplating techniques. We offer you state-of-the-art instrumentation to control and optimize the quality of your coating processes − both in the laboratory and in the process environment.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Specialty Cleaners and Lubricants for Laboratory Industry

    We manufacture and supply high quality laboratory cleaners. Whether you need to remove biological debris, fingerprints, protein, starch, or dye, our products provide consistent results. Our laboratory cleaners are excellent for use on flasks, pipettes, slides, stainless steel, plastic, and other laboratory equipment and surfaces. When rinsed properly, our cleaners leave absolutely no residue. Validation information is available. For most applications a 0.5% - 2.0% solution is effective. Charlie Troxel, Product Manager at LI-COR Biosciences includes a sample of Micro-90 with each DNA sequencer the company ships: `We have found your Micro-90 Concentrated Cleaning Solution to be unsurpassed in removing gel debris and fluorescent residue from our sequencing plates. Since clean gel plates are so critical to high quality sequence data…we feel that introducing our customers to Micro-90 will help them maximize the performance of their DNA Sequencer.`

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • environmental testing industry

    KOMEG Technology Industrial is an environmental testing industry leader in the design and manufacturing of climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in rooms, aging test chambers, drying ovens, salt spray testers and medical laboratory equipment etc. for the military and industrial market place.

    By KOMEG Technology Industrial Co.,Ltd. based in Dongguan, CHINA.

  • Premium

    Radiation Monitoring for Medicine and Research laboratories

    Medicine and Research laboratories The medical industry uses radioactivity to explore and heal the human body. In pharmaceutical laboratories, nuclear medicine practitioners and patients alike are exposed to ionizing radiation to various extents. These internal and external doses, generated by radiotherapy, scintigraphy and sealed or unsealed sources, require special precautions. Saphymo designs and manufactures various dose monitoring solutions, ranging from individual radiation protection to process and waste control. Research labs using accelerators or reactors can also rely on Saphymo’s ability to meet safety requirements by providing highly technical, custom-made devices suitable for monitoring both very low and very high activity. The Saphymo product ranges, from Radiation Monitoring Systems developed from A-Z by Saphymo to Survey meters and dosimetry, meet medical and research requirements to the full.

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Laboratory instruments solutions for pharmaceutical industry

    Pharmaceutical analysis guarantees drug safety by providing information on the identity, content, quality, purity, and stability of pharmaceutical products using analytical chemistry. Metrohm offers you a broad range of instruments and applications for quality control and for monitoring and improving drug manufacturing. With myriads of pharmacopeia-compliant analysis methods, we are your qualified partner for all chemical-pharmaceutical analysis issues and analytical method validations. In accordance with international pharmacopeias and various guidelines, Metrohm offers you analysis for active pharmaceutical ingredients (APIs), excipients, impurities, pharmaceutical solutions as well as pharmaceutical starting materials, and finished pharmaceutical products (FPPs). Additionally, we provide numerous wet chemical methods for atline and online process control as well as inline monitoring methods for assuring cost-effective manufacturing processes that satisfy all regulatory demands.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Laboratory equipments for measuring fluorine content in mineral powders & ores

    Fluorine-containing minerals such as fluorspar (fluorite) and cryolite are natural sources of fluorine that are widely used in the chemical industry (manufacturing of hydrofluoric acid and fluoropolymers for example), metallurgy (steel and alumina processing), the pharmaceutical industry and others. The fluorine content often has a significant effect on the processing of such mineral powders. Therefore, it is essential to know the fluorine concentration in order to ensure optimal processing and monitor/control emissions of toxic fluorine gases, for example in the Hall–Héroult process used to produce aluminium.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Gas analysis & monitoring systems for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Corrosion-resistant materials for Sulfur & capping compounds industry

    Sauereisen No. 600 flake Basolit Sulfur Capping Compound has been used for many years by concrete testing laboratories for testing concrete cylinders for comprehensive strength.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Measurement solution for fire testing for the railway industry

    A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as DIN 5510, applicable to the railway industry, can provide further requirements for gases to be measured.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Air pollution control (APC) equipments for fire laboratories

    Fire laboratories perform different types of tests and experiments to analyze the characteristics of products and materials , when exposed to fire. Using these data , manufacturers can improve their products, fire resistance, and their longevity. Although the fire is controlled in a laboratory, many toxic substances are formed and these must be removed before the air is released into the environment. EnviBATs technology is extremely effective for this type of application. It eliminates the particles of all sizes, which also has the advantage that it eliminates the burning smell.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    AutoChem - Crystallization

    Understand, Optimize and Control Crystallization From Laboratory to Manufacturing Plant. It is challenging to design a crystallization process that will scale-up to reliably manufacture a consistent product meeting yield, purity and crystal size distribution specifications, and at the same time ensure efficient downstream processing in filtration, drying and product formulation processes.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Portable and fixed gas analysers for incubator verification

    Geotech manufactures and supplies portable carbon dioxide monitors for use in incubator laboratories to verify CO2 in IVF and stem cell research applications.

    By Geotechnical Instruments (UK) Ltd based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output through our participation in The Beacon, an initiative at the forefront of green manufacturing practices for fiber production.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Machine condition monitoring for aviation, aerospace & airlines

    Overview

    Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development and testing.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Mercury monitoring for ocean cruises

    Researchers at Battelle Pacific Northwest Laboratory used a Tekran 2600 on a 2009 ship cruise. Due to the low levels of mercury in water, Tekran provided them with a custom 2600 Event Table to pre-concentrate mercury from multiple samples to push the detection limit lower. When planning an ocean bound cruise, instrument dependability is a paramount concern. At sea, there is no possibility to return instrumentation to the manufacturer for quick repair. The Tekran 2600 has a well deserved reputation for dependability and performance. If any repairs are necessary, the instrument is highly user-serviceable and easy to maintain.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    Testing Fume Hood Flow Dynamics using SF6 as a Tracer Gas

    A safe laboratory environment requires an effective method for clearing toxic material from fume hoods. Since all handling of toxic materials is completed in these hoods, it is critical to have a procedure to evaluate their operation to assure adequate protection for laboratory workers. The InfraRan Specific Vapor Analyzer, factory calibrated for SF6, is an ideal instrument for measuring fume hood efficiency in accordance with ASHRAE and other standards. Manufacturers identify the flow dynamics (factors that affect air flow in the hood and performance with air) using the ratings AM (as manufactured), AI (as installed), and AU (as used). A fume hood evaluation conducted under its operational environment is critical, as these tests will indicate any installation shortcomings as well as direct workers in proper laboratory hood techniques.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • LIMS Solutions for the Chemical, Petro-chemical & Oil Industries

    It is vitally important for today’s Petro-Chemical and Oil manufacturing industries to control the cost efficiency of their operations for investor interests and environmental impact equally.  Their laboratories are central to controlling production and most importantly need to provide accurate, transparent and traceable data. All production processes and product quality must adhere to stringent manufacturing regulations; therefore it has become more and more apparent that LIMS are the only way of controlling the manufacturing of Oils and Petro-Chemicals.

    By Autoscribe Informatics based in Reading,, UNITED KINGDOM.

  • Hydroxyl Number in Polyols (OH#) #3013

    The use of polymeric polyols is commonplace in the manufacturing of polyurethanes and other specialty polymers. The hydroxyl number (OH#) is a measure of the concentration of the hydroxyl groups on the polyol. This is an important parameter to monitor and control during polyol production. The laboratory method that is commonplace for hydroxyl number determination is both time consuming and involves the use of hazardous materials. This note will discuss the use of Guided Wave hardware and software tools for the measurement of hydroxyl number in polyols using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR can be applied in real time directly in process or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods. NIR also offers the benefit of increased safety over traditional methods. For well established process measurements, a Guided Wave ClearView® db multi-wavelength photometer can be used to achieve similar results.

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you