Only show results available in Virginia? Ok

laboratory mixing Applications

  • Premium

    Agitation and mixing solutions for bio technology

    The Biotechnology market is ever changing and on the leading edge of technology changes.  New products are continuously under development and agitation and mixing is used throughout the process.   A process may require any or a combination of the following:  blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer.   The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to large scale fermenters.   Biotechnology applications also require vendors who have strong R&D departments and laboratory facilities, polished and aseptic designs, easy drainability and cleanability designs, material validation, quality control programs specific to the project, and are able to meet governing specifications and directives such as FDA, USP, ASME-BPE, and cGMP requirements.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Premium

    Laboratory Weighing - Pipette Calibration

    To ensure data integrity regular pipette performance testing and pipette calibration are fundamental to monitor the accuracy of your pipettes. Testing pipette performance with a balance plays a critical part in this testing approach. METTLER TOLEDO offers solutions for occasional performance testing up to professional pipette calibration according to ISO8655. We can support you in finding the right mix between self made pipette calibration and professional service support tailored to your needs.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Gas control equipment for Life Science

    QCAL introduces CO2Control for incubators and test chambers. These gas dosing units can be adapted to nearly every incubator or test chamber. The user can set a CO2 concentration up to 30% vol. CO2. The CO2Control measures the actual concentration and adds CO2 from a CO2 gas container. The NDIR CO2-sensor has an excellent long-term stability, which provides years of stable CO2 measurement. Also the other parts as the sample gas pump, valve and fittings are designed for maintenance-free use over years. Humidity effects are compensated upto 95% rh at 37°C, also temperature effects are automatically corrected upto 50°C. The other way to control gas atmospheres in any life science equipment is to use gas mixing units GMS_2CH ( 2 channels ) or GMS_3CH ( 3 channels ) for N2, O2 and CO2. They can match flowrates up to 80 liters per minute with a concentration range up to 100 Vol% O2 and/or CO2.

    By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

  • Premium

    Measurement solution for organic vapour speciation

    Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable users to measure hundreds of gases.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    TPH in Soil Remediation

    InfraCal TOG/TPH Analyzers allow for TPH (Total Petroleum Hydrocarbons) in soil testing at remediation sites such as leaking underground storage tanks and produced water evaporation ponds. Site managers can avoid having costly soil remediation equipment sit idle while waiting for off-site lab results. Sampling requires a few simple steps that can be performed by non-technical personnel. The soil is mixed with the extraction solvent, shaken, filtered, and then presented to the InfraCal Analyzer for measurement. Features include: - Results in under 15 minutes, including extraction ¨ Detect levels as low as 10 ppm ¨ Portable, rugged, lightweight, easy-to-use ¨ Battery operable ¨ Ideal for field or laboratory applications ¨ Factory calibration available

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Ozone/UV systems for Industrial, municipal, and residential wastewater treatment

    In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two reaction tanks with mixing systems, a vent ozone destructor, and a control system. The world largest project for removal of PCDD/F was managed by BCD CZ a.s., a subsidiary of Thermal and Chemical Soil Remediation Ltd.

    By Lifetech based in Brno, CZECH REPUBLIC.

  • Computerized instrumentation for the medical gas flow and scientific research

    Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate gas mixes for any laboratory or clinical need. You can generate the specific reduced oxygen environments needed for anerobes as well as the enriched oxygen environments needed in a variety of cellular, viral and high density culture applications. Systems can also be used to create a specific and stable gaseous environment in a clean room. In all cases, the Environics Atmosphere Mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of a high number of expensive blended cylinders.

    By Environics, Inc. based in Tolland, CONNECTICUT (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you