Only show results available in Virginia? Ok

laboratory service Applications

  • The Environmental Measurement Laboratory (EML)

    PP “Tehnologia O” has an Environmental Measurement Laboratory (EML) that allows to carry out instrumental measurements of emissions of pollutants into the air. EML have earned certification under services in state control of adherence to standards, norms, rules and state metrological control from SOE “Vinnytsya Center for Standardization, Metrology and Certification” (SOE “Vinnytsyastandartmetrologiya”) (certificate No. ПУ-0070/15 valid till 03 July 2018).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Air monitoring equipments for laboratory analysis

    Our purpose built environmental laboratory provides accurate and efficient analysis, specialising in the determination of gaseous pollutant concentrations. Other processes can also be performed to meet the specific needs of our customers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Pipette Calibration

    To ensure data integrity regular pipette performance testing and pipette calibration are fundamental to monitor the accuracy of your pipettes. Testing pipette performance with a balance plays a critical part in this testing approach. METTLER TOLEDO offers solutions for occasional performance testing up to professional pipette calibration according to ISO8655. We can support you in finding the right mix between self made pipette calibration and professional service support tailored to your needs.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Laboratory Analysis for Pharmaceutical Industry

    We are the home of the Next Generation Impactor™ (NGI™), a cascade impactor for testing Metered-Dose Inhalers, Dry-Powder Inhalers and other inhalable drug products. We also offer labor-saving, productivity-enhancing tools for recovering drug samples collected by a cascade impactor. We offer mensuration services for both the NGI and the Andersen Cascade Impactor and the full range of accessories for inhaler testing.

    By MSP Corporation based in Shoreview, MINNESOTA (USA).

  • Analytical services for mining industry

    Maxxam provides the mining industry with comprehensive analytical testing services including water, soil and air quality parameters. Analytical testing ranges from metal leaching and acid rock drainage, to Ecotoxicology services and environmental chemistry. We are accredited for specific analytical tests related to mining test regulations and requirements. Along with being accredited for tests such as environmental chemistry and acid mine drainage, below is an excerpt of the laboratory’s current scope of accreditations:

    By Maxxam Analytics based in Mississauga, ONTARIO (CANADA).

  • Independent particle characterization services for pharmaceutical industries

    Supporting drug development with pharmaceutical testing is some of the most exciting work we do. As a premier cGMP contract service laboratory, PTL partners with pharmaceutical scientists to identify key physical characteristics of pharmaceutical APIs and excipients ranging from powders, solids and liquids. With over a decade of experience testing a vast array of pharmaceutical products, PTL’s analytical staff uses custom-designed test methods for particle size, particle shape, surface area, pore volume, pore size, thermal analysis, powder flowability and zeta potential analyses.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Premium

    Application package continous casting powder 'ready to go'

    This application package is a 'ready to go' calibration kit for xrf instruments. Together with the company Stollberg, FLUXANA has developed a fused bead method for the product control of continuous casting (CC) powders. The general idea was a universal program which covers a wide product range and that is also able to control the used raw materials. The result was two different application packages each with a set of standards and a set of control samples. - Calibration set continuous casting powders prepared from CRM as glass beads - Calibration set raw materials prepared from CRM as glass beads - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation each 10g powder for preparation on site - Flux FX-X100 FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Water quality testing for drinking water services in remote areas

    In 1985, the University of Surrey in collaboration with Oxfam developed the Oxfam DelAgua Portable Water Quality Monitoring Test Kit. The Oxfam DelAgua kit enables field workers to test water quality in remote and isolated situations and in circumstances where there is no access to a water testing laboratory. Since its development in 1985, the water test kit has been used by all the major International NGO-s and other aid agencies in over 130 countries around the world.

    In 2006, The University of Surrey and other investors founded DelAgua Water Testing Limited to take over the management of the DelAgua organisation. Since then, various improvements have been made, including:

    • The upgrading of all kits
    • The upgrade of the design, manufacturing and distribution functions
    • R&D to produce a portable microbiological testing kit that provides quantitative results in less than 20 minutes.
    • The upgrade of existing services and the introduction of new services, including:
      • Free access to a water quality risk assessment software program on DWT`s website
      • Free access to a library of reference documents on DWT`s website

    In addition to distributing its own kits and consumables, DWT also offers a distribution service for other manufacturers` products. The most popular products are detailed on this website, but those not detailed can also be supplied - DWT is able to source in excess of 60,000 products from numerous manufacturers.

    DWT is committed to providing services and products to enable the provision of clean drinking water for everyone around the world.

    By DelAgua Group based in Marlborough, UNITED KINGDOM.

  • Marine envrionmental solutions for oil & gas industry

    Fugro EMU Limited provides turn-key marine environmental services to major oil and gas providers in the UK and overseas by combining its multi-disciplinary capabilities in environmental consultancy, ecology, geophysical and metocean survey, geology and laboratories with its fleet of dedicated offshore vessel services. Fugro EMU vessels enable its consultant teams to deliver project specific needs from exploration through to development and decommissioning in addition to oil spill contingency planning. This includes all aspects of environmental operations and maintenance requirements in UK and overseas coastal and offshore territories. Recent mergers have seen Fugro EMU develop and grow as a company and has continued to support the fundamental belief in the importance of health, safety and welfare. Fugro EMU prides itself on conforming to the stringent standards expected by the oil and gas industry.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you