Only show results available in Virginia? Ok

laboratory system Applications

  • Laboratory Information Management Systems (LIMS) for University and Non-profit Laboratories

    University and non-profit laboratories often mirror commercial or municipal laboratories in more than a few processes. Many times, a COTS (configurable, off the shelf) LIMS may easily fit into a university setting to provide much needed quality control and proper data storage, while at the same time being affordable.

    By Khemia Software Inc based in Livonia, MICHIGAN (USA).

  • Laboratory Information Management Systems (LIMS) for Environmental Industry

    Environmental testing laboratories are facing an increasingly challenging marketplace, characterized by low prices and slim margins. Having a comprehensive laboratory information management system (LIMS) to improve productivity has become critical for commercial environmental labs to remain competitive in this difficult business landscape.

    By Khemia Software Inc based in Livonia, MICHIGAN (USA).

  • Gas analysis & monitoring systems for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Laboratory Information Management Systems (LIMS) for Water & Wastewater Industry

    Laboratories that analyze drinking water and wastewater form a critical component of our public health infrastructure, guided by criteria in legislation including the Safe Drinking Water Act (SDWA) and the National Pollution Discharge Elimination Program (NPDEP). These facilities are required to handle high volumes of sewage and drinking water to analyze for wet chemistry and microbiology before discharge into community water systems. This requires the facilities to maintain continuous sampling programs,...

    By Khemia Software Inc based in Livonia, MICHIGAN (USA).

  • Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we...

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Premium

    Laboratory Analytical - pH-Measurement Application

    The right System for the right Application. By choosing the right electrode, instrument and accessories customers can build a dedicated system for their application. A system capable of giving accurate and repeatable results time after time.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Gas detection solutions for the laboratories industry

    Fixed & Portable Gas Detectors for Laboratories: A wide variety of gases are used in labs such as carbon dioxide, argon, helium, nitrogen and oxygen. These gases pose a serious risk should they leak, this risk can occur from fixed piped gas systems or individual cylinders of gases. Analox offer a range of fixed & portable gas detectors suitable for various laboratory processes which use gas and are ideal for detecting gas leaks. From portable oxygen monitors, such as our Aspida, to fixed monitors such...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Statistical Process and Quality Control

    Systematic monitoring and control of your filling and production processes helps you maintain process compliance while minimizing loss of product through overfilling. Our stand-alone or integrated systems give you all the statistical data you need to understand, document, and control your profitability – fulfilling even the most stringent regulatory requirements.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Hazardous Area (Ex) Weighing

    Are you continuously seeking to improve your safety, health and environmental standards, while striving for increased productivity and product quality? With METTLER TOLEDO’s solutions for hazardous areas, apparent contrasts turn into one set of standards. Our wide selection of intrinsically safe weighing systems includes balances, indicators and accessories, weighing modules, and weighing platforms of several sizes, shapes and capacities.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Laboratory equipments for fluid typing

    GeoSpec2 instruments fitted with Pulsed Field Gradients (pfg) are able to carry out measurements dependent on the diffusion, flow, or distribution of the fluids within the core sample. One application is for fluid typing. It is possible that different fluids, such as heavy oils and partially bound water, may exhibit similar T2 values, which makes it difficult to identify which fluid is which using a standard T2 distribution. However, even if they have similar T2 values they are...

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Laboratory equipments for fluorine in industrial & construction waste

    Measuring Fluorine in Industrial and Construction Waste using Benchtop NMR MQC Analyser. Processing and recycling of industrial and construction waste often requires measuremetns of fluorine content in the materials. It mostly relates to monitoring potential emission of toxic fluorine gas and optimisation of the waste processing. Our benchtop NMR analyser MQC systems provide a fast, simple and accurate method of measuring fluorine in liquid and dry waste. The NMR technique does not require the use of any...

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Laboratory equipments for fat oil & grease FOG in waste water

    Measurement of Fats, Oils and Grease (FOG) in waste water is a crucial parameter in water quality control and environmental monitoring performed by water suppliers’ laboratories and environmental authorities; the contamination builds up in the sewerage system and will eventually lead to blockages. Typically the waste water is analysed by first passing a large volume through a filter then selectively determining the grease build-up on the dried filter by an analytical method.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Measurement solution for multi-stream combustion research

    Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for stack testing

    Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Particle Physics Applications using the Modular Barrier System

    MRP Systems has been receiving an increasing number of orders from Particle Physics Labs doing High Energy Physics Research and Dark Matter Laboratories who want to use the MRP Barrier System to shield out background radiation, in the search for neutrinos, Weakly Interacting Massive Particles (WIMP’s), Axions,...

    By MRP Systems Limited based in Preston, UNITED KINGDOM.

  • Continuous Emissions Monitoring Calibration Systems (CEMCS)

    The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers.

    By Environics, Inc. based in Tolland, CONNECTICUT (USA).

  • Air sampling & monitoring systems for biomedical, chemical & pharmaceutical industry

    HI-Q Environmental Product Company provides air sampling instrumentation & systems for several niche applications in a number of disciplines in the broad area of `Life Sciences`. In the Biomedical, Chemical, & Pharmaceutical industries, HI-Q has marketed instrumentation for certain applications for many years. Our ambient, in-door breathing level air samplers, commonly known in the industry as `Goose-Neck` or `Giraffe` air samplers have been instrumental in analyzing workplace exposure. HI-Q has also...

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Ozone/UV systems for Industrial, municipal, and residential wastewater treatment

    In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two...

    By LIFETECH based in Brno, CZECH REPUBLIC.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you