Only show results available in Virginia? Ok

laboratory technology Applications

  • Premium

    High technology gas generators for laboratory industry

    Laboratory.

    By Leman Instruments SAS based in Archamps, FRANCE.

  • Premium

    Aerosol and particle technology for process control industry

    In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a process.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Aerosol and particle technology for pressure & temperature industries

    The reproducibility of the devices has been approved by worldwide use. In order to avoid the condensation or vaporization of the particles during the particle measurement, the isothermal and isobaric particle generation and measurement is necessary.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Thin-film Measurement Technology for Medical Industry

    The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the patient.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Laboratory Ion Analyses

    Our single ion and multi ion kits allow for real-time laboratory analysis of one to six ions simultaneously with one probe. These ion sensors along with the reference electrode are solid state which allows for easy handling, storage and maintenance. No filling solutions nor buffers are required. The sensors are based on carbon nanotube technology allowing for reliable and reproducible measurement of ions in liquids.

    By CleanGrow based in Blackpool, IRELAND.

  • Premium

    Advanced water purification technologies for pharmaceutical, medical, & laboratory sector

    SnowPure has been providing EDI technology to the pharmaceutical and medical markets since 1997. We have installations in over 47 counties including the United States, Canada, South America, India, Europe, Japan, China and Southeast Asia.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Track and Trace and Inspection Solutions for the Medical Device Industry

    IMEC Technologies provides inspection, track and trace, materials management and automated identification solutions for the medical device industry. Our inspection system Inspector T&T helps you monitor and audit equipment at your facility. Our HazMat T&T Waste Tracking solution helps you meet regulatory requirements governing the management and disposal of waste generated by your production processes. Our Navigation materials management solution helps you improve overall process efficiency by tracking the movement of materials throughout your production process.

    By IMEC Technologies based in Champaign, ILLINOIS (USA).

  • Premium

    Air pollution control (APC) equipments for fire laboratories

    Fire laboratories perform different types of tests and experiments to analyze the characteristics of products and materials , when exposed to fire. Using these data , manufacturers can improve their products, fire resistance, and their longevity. Although the fire is controlled in a laboratory, many toxic substances are formed and these must be removed before the air is released into the environment. EnviBATs technology is extremely effective for this type of application. It eliminates the particles of all sizes, which also has the advantage that it eliminates the burning smell.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Agitation and mixing solutions for bio technology

    The Biotechnology market is ever changing and on the leading edge of technology changes.  New products are continuously under development and agitation and mixing is used throughout the process.   A process may require any or a combination of the following:  blending, solids handling including incorporation/dissolving/suspension, mass transfer, and solids and heat transfer.   The scale for Biotechnology reactors and support units range from a few liters to several cubic meters and from small laboratory units to large scale fermenters.   Biotechnology applications also require vendors who have strong R&D departments and laboratory facilities, polished and aseptic designs, easy drainability and cleanability designs, material validation, quality control programs specific to the project, and are able to meet governing specifications and directives such as FDA, USP, ASME-BPE, and cGMP requirements.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Premium

    AutoChem - Process Analytical Technology (PAT)/Quality by Design (QbD)

    Process Analytical Technology (PAT) has been implemented for years, particularly by the chemical industry for the control of chemical processes. More recently, PAT has become a cornerstone of the US Food and Drug Administration’s (US FDA) Quality by Design (QbD) initiative for both the design and control of quality processes. For this reason, the pharmaceutical industry is also active in utilizing PAT tools. PAT tools can be implemented in both the lab and the plant, with laboratory PAT focused more on the design of a quality process and with plant PAT focused on the monitoring and control of the process.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Measurement solution for FTIR Vs. GC in gas analysis

    Comparison of Technologies

    A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the lab.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Application package Ash for analysing oxidic materials

    This application package is a `ready to go` calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • environmental testing industry

    KOMEG Technology Industrial is an environmental testing industry leader in the design and manufacturing of climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in rooms, aging test chambers, drying ovens, salt spray testers and medical laboratory equipment etc. for the military and industrial market place.

    By KOMEG Technology Industrial Co.,Ltd. based in Dongguan, CHINA.

  • Premium

    Application package raw materials

    Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. However, many laboratories cannot specify exactly what material they have to analyse. Therefore FLUXANA has created a wide range oxidic application program to allow complete analysis of the unknown material. The concentration ranges and elements of interest can be adapted to customer needs. It contains all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry. FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Solutions for personal protection against vapors, gases, air particles & dust

    Our activated carbons provide personal defense solutions against vapors, gases, air particles, and dust. Proven Experience: Since 1942, Calgon Carbon has been helping the world breath more easily by providing the most technologically advanced activated carbons for personal and collective protection filters. Today, we supply high-quality impregnated carbon for military, industrial, and laboratory markets. As new needs for personal protection emerge, we will continue to develop new products and find innovative uses for existing ones.

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • Casting Inspection

    Non destructive test methods are highly effective in the detection of casting defects which are not always visible on the surface. X-ray is a well-known tool for casting quality control. Digital radiography technology takes these tests to the next level. Excellent resolution and dynamic range enable NDT technicians to see the smallest bubbles and the tiniest of cracks. Non destructive test methods employing portable Digital Radiography systems can serve as an efficient solution in facilities that require both laboratory and onsite inspection.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Ozone/UV systems for Industrial, municipal, and residential wastewater treatment

    In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two reaction tanks with mixing systems, a vent ozone destructor, and a control system. The world largest project for removal of PCDD/F was managed by BCD CZ a.s., a subsidiary of Thermal and Chemical Soil Remediation Ltd.

    By Lifetech based in Brno, CZECH REPUBLIC.

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you