Only show results available in Virginia? Ok

landfill system Applications

  • Landfill lining

    GCLs have become the gold standard clay component of composite lining systems used in industrial, hazardous and municipal solid waste landfills. Used alone or in combination with a geomembrane in a composite cover system, GCLs provide significantly lower permeability, improved ease of installation, an increased amount of usable space. In many cases GCLs are more cost-effective than traditional compacted clay liners. GCLs are also not subject to deterioration from differential settlement and freeze-thaw cycles, which can damage traditional compacted clay liners. Important design considerations for GCLs in landfill caps include confining pressure, and potential for ion exchange and desiccation.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • PEHD membrane sealing systems for landfill surface liners

    Unlike base liners, surface liners are not buried at some point under many metres of waste and instead are usually protected over the course of many years only by a 1-metre thick mineral layer. As a result, there can be uncertainty about the integrity of their leak-proofing characteristics, particularly if the land is subsequently used for other purposes; however, at the same time, repairs are also possible at reasonable cost if the location of any damage can be established.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • PEHD membrane sealing systems for landfill base liners

    There are several phases of preparation of landfill base liners, starting with the positioning of the membrane, until these can be covered with several metres of refuse. These membranes may be damaged during preparation, but can also be inspected and repaired. It is advisable to undertake inspections at regular intervals.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Cover and Liner Systems for Landfill Applications

    lEC works closely with engineers and contractors on the design, layout and installation of landfill caps and leachate liners. Our experienced crews have successfully installed geomembrane in some of the most challenging basins and shapes and in some of the harshest conditions around the world.


    Our fleet of trucks, trailers and equipment are designed to meet virtually any need. We test every weld and record the results for full accountability and quality assurance, which provide our customers with specific locations and corresponding test results.

    We are interested in learning more about your needs and unique requirements. To learn more about our products and services or to request additional information, call us today!

    By Industrial & Environmental Concepts, Inc. (IEC) based in Lakeville, MINNESOTA (USA).

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • landfill leachate treatment

    1.Leachate Main Features: (1)High concentration of organic matter. (2)High salt content; (3)High ammonia and nitrogen content. (4)C/N/P Microorganism nutrition ratio disorders. The water quality, volume and temperature will also change, and the heavy metal content is complicated. 2.Special reverse osmosis membrane technology Features : 1)Super NF/RO High Anti-fouling Membrane is not easy clogged, and the system is with good stability. Not affected by the effect of biochemical treatment . Longer service life 2) Super NF/RO High Recovery Rate The operating pressure of Super NF/RO is higher, and with higher recovery rate up to 90-95%. It will yield less concentrated water and reduce the concentrated water treating cost. 3) Concentrated water evaporation treatment Thoroughly solve the problem of pollutant enrichment caused by concentrated water reuse, so that the biochemical system and membrane system can maintain long-term and efficient operation

    By Chengdu Meifute Membrane Technology Co., Ltd based in Chengdu city, CHINA.

  • PEHD membrane sealing systems for retrofitting in existing landfill site

    It is also possible to retrofit a monitoring system in existing surface sealing liners without impairing the synthetic liner sheet or the immediately adjacent functional layers. For this purpose, cable trenches must be dug in the recultivation layer above the drainage layer. The detection cables are then laid in these trenches.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant...

    CairNet is a simple and efficient way to monitor processes and plant surroundings via a wireless communicating network and autonomous (solar panel and battery). CairNet surveys fugitive emissions of toxic gases or odourous gases around waste water treatment plants (WWTP), allowing you to react quickly to gas leaks. CairNet allows the wireless survey of hundreds of measurement points within a 200m radius of the wireless receiver for a much efficient installation cost. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Read more https://www.environmental-expert.com/products/cairpol-cairnet-autonomous-real-time-pollution-monitoring-network-274828

    By Cairpol based in La Roche Blanche, FRANCE.

  • PEHD membrane sealing systems for basins

    For reasons of environmental protection, basins often need to be leakproof, e.g. seepage basins on landfill sites. However, it can also be important to ensure, for example, that valuable water does not escape into the subsoil undetected.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Premium

    E-scrap Recycling Equipment for Recycling Industry

    Electronic scrap (also named e-scrap) mainly includes discarded household appliance like refrigerator, TV, computer, washing machine, printer, fax machine, cellphone, circuit board, hard discs, CD ect. With the development of electronic industry and information technology, and electronic products’ fast replacement, the problem of e-scrap has become one of the stringent problems which need to be resolved effectively and correctly. Every year the 20 – 50 million metric tons of electronics end up in landfills all over the world.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Recycling Systems for the municipal solid waste processing sector

    MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in transfer stations and delivered to landfill sites.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Food Waste Recycling, Reduction or Disposal Systems for Mining Oil & Gas Exploration

    Oil and Gas Pipeline Labour Camps: With applications across Turkey, Azerbaijan and the former Russian State of Georgia, Tidy Planet are suppliers to 7 different locations for large scale equipment to generate energy from the food wastes at these 400-2000 person sites. With the sites needing a solution that prevents waste being backhauled many miles to registered facilities, having a robust unit on hand that generates the heating and hot water for the kitchens, shower block and laundry is ideal. The Dragon is a scalable solution and can be provided for sites with 200-10,000 staff on site. •Remote Mines & Mine Labour: Treating food wastes at source in remote applications where landfill or uncontrolled dumping of wastes is no longer permitted, on site Rocket composting to allow the use of a composted end product for land remediation is often chosen. Otherwise as with oil & gas the Dragon food waste / energy system a preferred alternative providing a simple method of energy generation

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Recycling sorting solutions for the ash recycling

    Incinerated municipal solids and other waste streams results in a significant amount of ash residue, which often contains valuable metals. The amount of this remnant being created globally is rapidly increasing due to legislation which prohibits landfilling and creates new incentives for incineration. TOMRA Sorting sensor-based systems allow waste management businesses to capitalize on today’s challenges whilst simultaneously enabling them to look to the future with confidence.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Environmental solutions for the geomembrane protection

    High-Strength Protection of Geomembrane Liners. As a protective cover for geomembranes for closure caps and stormwater ponds, the GEOWEB system prevents liner damage and degradation. With infill confined in the GEOWEB system, slopes can be designed steeper while maintaining strength and integrity, even when subjected to settlement - common in landfills.  The landfill cover system can be designed as a vegetated, aggregate armored, or concrete solution that remains flexible.  GEOWEB liner protection is a ‘complete solution’ including integral tendons and ATRA tendon load transfer clips.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Spent Catalyst Drying

    "Spent" catalysts are strictly regulated due to the environmental concerns they pose, and since landfill disposal is unacceptable, companies suffer big expenses. Vulcan® Systems' technology removes the hydrocarbons from spent catalysts, recovering valuable materials such as nickel, vanadium, molybdenum, and platinum. Catalysts are essential in the refining of petrochemicals into clean fuel and other valuable products.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you