Only show results in Virginia? Ok

lead paint Applications

  • XRF analysis for lead paint

    Niton analysers facilitate direct surface testing for lead paint, testing for lead in dust wipes from surfaces, testing the lead content of soil in the surrounding area (containment) and the testing of lead content in filters from respirators or volume air samplers for worker/public protection.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Paint shop cleaning

    Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to hazards.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal

    No respirator required. No containment structures. Osha, epa,  rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory requirements.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Premium

    Pumps for Paint & Ink

    Coloured and protected surfaces provide added value as paints and enamels help to make products both more interesting and increase their life. That is why they are important finishing materials where care, environmentally-friendliness and reliability are needed in their supply and correct dosage. The DESMI ROTAN® gear pumps are commonly used for paints, resins and coatings. For ink manufacturing and printing press applications, the HD series and specially fitted PD and ED magdrive pumps are being used. A leading paint factory manager, states: “ROTAN® pumps have for decades been used in numerous of our plants. The ED model was chosen due to its magnetic coupling. A magnetically coupled design, which has no rotating seals, ensures less downtime and lower operating costs. Every pump in our new facility is magnetically coupled, and thus we have eliminated the problems associated with packed glands and mechanical seals.”

    By DESMI A/S based in Noerresundby, DENMARK.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Marine Industry

    When ships, submarines and port facilities exposed to the corrosive marine environment need to be repainted, get to clean steel quickly and safely without any messy cleanup using our shrouded power tools! Old paint is removed and packaged in one step using our powerful VAC-PAC HEPA vacuum and deposited directly into 55-gallon drums, safely sealed and ready for transport and disposal when full. No costly containment is required for hazardous jobs, because dust is captured at the surface, before it’s emitted.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Pulsair`s industrial mixers for paints & coatings industry

    Pulsair Systems is the leading provider of industrial pneumatic (air) mixing and blending equipment for the paint & coating industry. Our industrial paint & coating mixings systems are highly efficient, cost-effective and well suited for any paint or coating regardless of its viscosity. Pulsair offers a full range of bulk tank mixers for paint and coatings that include a 5 to 55 gallon drum mixer, a tote mixer (stainless steel, plastic, cardboard or `bag in a box`) and an IBC mixer (Intermediate Bulk Containers). For larger individual ink & pigment mixing tanks as well as tank farms, we offer custom built mixing solutions.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Nuclear Decon

    Pentek is the industry leader in manufacturing, engineering and designing specialty surface decontamination technologies and processes for nuclear applications. Our technology offers a safe and environmentally friendly methodology that removes, collects and packages the waste in a single-step manner. Since 1981, our products have been used for critical work scopes in the nuclear weapons complex, commercial nuclear utility industry, and various DOD sites where strict controls are a prerequisite. The Pentek system offers a proven, dust-free process with built-in engineering controls that protect both the worker and the surrounding environment during the surface cleaning process.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

    Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry

    Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint,
    PCBs and asbestos on a large scale.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Concrete Scabbling

    When concrete is contaminated with PCBs, radiation or other hazards, scabbling is often the only means of remediation. By removing a thin outer layer from a concrete surface, our shrouded power tools can make a structure safer for occupancy or demolition. Our powerful VAC-PAC® HEPA vacuum captures all dust, debris, and air-borne contaminants for easy transportation and disposal in standard 55-gallon (200L) drums. Whether you’re applying a new coating system or  a concrete overlay, a Concrete Surface Profile number (CSP 1-9) is often specified according to ICRI’s Technical Guideline No 310.2R. The examples below illustrate how Pentek tools can achieve your requirements:

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Pulsair`s industrial mixers for ink & pigment industry

    Pulsair Systems is the leading provider of industrial pneumatic (air) mixing and blending equipment for inks & pigments. Our industrial ink & pigment mixings systems are highly efficient, cost-effective and well suited for any ink regardless of its viscosity. Pulsair offers a full range of bulk tank mixers for inks & pigments that include a 5 to 55 gallon drum mixer, a tote mixer (stainless steel, plastic, cardboard or `bag in a box`) and an IBC mixer (Intermediate Bulk Containers). For larger individual ink & pigment mixing tanks as well as tank farms, we offer custom built mixing solutions.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Surface preparation

    Problem: Removing rust, scale and coatings with grit blasting requires containment and/or clean-up, and those costs can have a significant impact on profitability. For contractors doing environmental remediation – removing asbestos or lead paint, for example – the containment issue is even more critical.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you