Only show results in Connecticut? Ok

lead removal Applications

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal

    No respirator required. No containment structures. Osha, epa, rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory requirements.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Marine Industry

    When ships, submarines and port facilities exposed to the corrosive marine environment need to be repainted, get to clean steel quickly and safely without any messy cleanup using our shrouded power tools! Old paint is removed and packaged in one step using our powerful VAC-PAC HEPA vacuum and deposited directly into 55-gallon drums, safely sealed and ready for transport and disposal when full. No costly containment is required for hazardous jobs, because dust is captured at the surface, before it’s emitted.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Air purification solutions for refineries industry

    Problem: The need for uncontaminated, controlled atmospheres is essential. Throughout the industry, the need for uncontaminated, controlled atmospheres is essential. This is especially true since lead-free standards that removed lead from solder were implemented, namely RoHS. Electronic equipment is now even more sensitive to gaseous contaminants that cause corrosion.

    By ProMark Associates, Inc. based in Skokie, ILLINOIS (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Concrete Scabbling

    When concrete is contaminated with PCBs, radiation or other hazards, scabbling is often the only means of remediation. By removing a thin outer layer from a concrete surface, our shrouded power tools can make a structure safer for occupancy or demolition. Our powerful VAC-PAC® HEPA vacuum captures all dust, debris, and air-borne contaminants for easy transportation and disposal in standard 55-gallon (200L) drums. Whether you’re applying a new coating system or a concrete overlay, a Concrete Surface...

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Underwater remotely operated vehicles solutions for ethanol/bio-diesel industry

    TEP has been the leading supplier of removable insulation blankets in this fast growing ethanol industry. We offer the service of labeling the product for the insulation contactors that act as our distributors. Through the use of our specialized design software, nesting programs to minimize material waste, and cad-cam cutting machines to cut fabric and insulation, we can fabricate large removable insulation cover orders much more cost-effectively than if the project were to be handled on site.

    By Thermal Energy Products Inc. (TEP) based in Fargo, NORTH DAKOTA (USA).

  • Recycling sorting solutions for the fines copper

    Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.

    By TOMRA Sorting GmbH based in Asker, NORWAY.

  • Premium

    Water Treatment in Soil and Groundwater Contamination

    Several industries and industrial processes may contribute to soil and groundwater contamination. AdEdge Technologies has supplied filtration equipment for several remediation efforts to remove arsenic, lead, and other inorganic contaminants to meet state and federal mandates.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    ADVANCEES custom skid-mounted water purification equipments for deionization

    Deionized water, also known as demineralized water (DI water or de-ionized water; can also be spelled deionised water), is water that has had its mineral ions removed, such as cations from sodium, calcium, iron, copper and anions such as chloride and bromide. Deionization is a physical process which uses specially-manufactured ion exchange resins which bind to and filter out the mineral salts from water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that...

    By Advanced Equipment and Services based in Coral Springs, FLORIDA (USA).

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

    Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Infrastructure & Civil Industry

    Revitalizing our bridges, railways, seaports, water towers and other aging infrastructure is a growing priority. Make these projects a reality by reducing or eliminating the traditional overhead costs of removing lead paint, PCBs and asbestos on a large scale.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Nuclear Decon

    Pentek is the industry leader in manufacturing, engineering and designing specialty surface decontamination technologies and processes for nuclear applications. Our technology offers a safe and environmentally friendly methodology that removes, collects and packages the waste in a single-step manner. Since 1981, our products have been used for critical work scopes in the nuclear weapons complex, commercial nuclear utility industry, and various DOD sites where strict controls are a prerequisite. The Pentek system...

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Premium

    Ice blasting technology for cleaning contractors

    Currently have a cleaning company, or looking to start your own? Position your business with the power of using wet or dry ice to meet any tough challenge that comes your way. As many companies offer ‘just’ dry ice blasting. Make your company’s services stand apart by offering wet ice blasting as well. With the cost and performance advantages regular ice can offer; your business will have an edge in the marketplace.

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Solutions for oil & gas industry

    In crude oil refining, our technologies are successfully applied during plant turnarounds to remove pyrophoric iron sulfide scale, reducing the threat of exothermic reactions and toxic sulfide odor production.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Surface preparation

    Problem: Removing rust, scale and coatings with grit blasting requires containment and/or clean-up, and those costs can have a significant impact on profitability. For contractors doing environmental remediation – removing asbestos or lead paint, for example – the containment issue is even more critical.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Premium

    Ice blasting technology for building restoration and remediation

    Applications of Coulson Ice Blast for Building Restoration and Remediation sector: Ice Fire and Smoke Damage Water and Flood Damage Asbestos Removal (Negligible Airborne @ 0.035 mg/m3) Mold Remediation Adhesive removal Reversal of corrosive contaminates Wood Resurfacing General cleaning Brick Stone Concrete Tile Wood Metal Tank cleaning Tar removal Vintage aircraft cleaning Enhanced Ice Soot Lead Paint abatement

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Oxidative solutions for the cleaning and disinfection

    Reduce power, water and chemical use; save time and achieve robust hygiene outcomes with eloclear.

    By Ozo Innovations based in Kidlington, UNITED KINGDOM.

  • Wastewater Treatment Solutions for Metal Finishing

    The metal finishing industry is faced with stringent wastewater effluent guidelines as administered by the USEPA and local municipalities. Extreme pressure from competition and the need to be cost competitive make meeting these guidelines particularly important, as stiff financial penalties can result from violations. Surface preparation applications generate a wide variety of challenges for meeting wastewater compliance on a consistent and economic basis.

    By Plymouth Technology, Inc. based in Rochester, MICHIGAN (USA).

  • Commercial Water Filtration

    The quality of filtered water is the most important across all industries as part of Advanced Filter Systems' continuing effort to clean and purify water with a focus on removing sulfur and lead. Advanced Filter Systems is the only firm with proven technology to remove 99.99% of sulfur and lead from water and other liquids. PORTABLE UNIT FILTERING Unique filtering applications, which provide solutions far beyond other common filtering techniques for in-house applications are available from Advanced Filter...

    By Advanced Filter Systems based in ILLINOIS (USA).

  • Water treatment for cooling towers

    Controlling and preventing the growth of microorganisms in a cooling tower is extremely important and required to keep the system running at optimal levels. The presence of microorganisms will cause the system to breakdown and decreases the efficiency of the heat transfer. Typically oxidizing biocides such as chlorine and bromine have been used to treat cooling water. Unfortunately these chemicals are highly reactive with other chemicals and microbiological species found in the water. Chlorine dioxide however is...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you