leak detection Applications in USA

  • Premium

    Water Leak Location for the Leak Detection Industry

    Our water leak location instruments are used to firstly identify leaks in water distribution networks (pre-locate) and then to pinpoint their position using one of our correlators and/or ground microphones.

    By Hermann Sewerin GmbH Distributor in Colina, ALASKA (USA).

  • Premium

    Industrial solutions for the leak tester

    A number of industries such as automotive parts (e.g. engine blocks, air bags, etc.), medical equipment (e.g. catheters) and food packaging rely on various verification tests to ensure that such critical parts are leak proof. Industrial leak testing benefits from high speed and excellent repeatability offered by the Axetris mass flow meters. Axetris leak tester customers call it “fast repeatability”.

    By Axetris Ag Office in Itasca, ILLINOIS (USA).

  • Methane gas leak detection

    Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal`s EyeC Gas Thermal Imager for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in mitigating...

    By Opgal Optronic Industries Ltd. Distributor in MASSACHUSETTS (USA).

  • Premium

    Fire detection solutions for the oil rigs

    The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an...

    By Codel International Ltd Office in Keswick, PENNSYLVANIA (USA).

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool...

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

  • VOCs gas leak detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which...

    By Opgal Optronic Industries Ltd. Distributor in MASSACHUSETTS (USA).

  • Premium

    Fire detection solutions for the power stations sector

    One of the main hazards in a power station is a fire in a coal rich environment; the latter can often become an explosion with consequential damage to human life and capital equipment.

    By Codel International Ltd Office in Keswick, PENNSYLVANIA (USA).

  • Premium

    Gas Leak Detection for the Gas Industry

    Sewerin gas detection instruments are used to identify and quantify gas leaks in natural gas distribution networks. Designed to be intuitive to use for many different tasks in the gas utility industry the infrared sensors ensure accuracy and sensitivity. Our equipment is used in many countries by all the world`s major gas supply companies.

    By Hermann Sewerin GmbH Distributor in Colina, ALASKA (USA).

  • Flow & Energy Management Solutions for Plant & Machine

    Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Monitoring of leaks in heat exchangers

    Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample analysis.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole,...

    By Hiden Analytical Ltd. Office in Naples, FLORIDA (USA).

  • VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which...

    By Opgal Optronic Industries Ltd. Distributor in MASSACHUSETTS (USA).

  • Gas Detection and Analysis Equipment for Oil and Gas Industry

    The Oil & Gas segment is the biggest market for gas detection and analysis equipment. It is common to describe this industry based on the product flow, from “Upstream” exploration and extraction location toward a “Downstream” flow, which end up at the end user home or business. Throughout the Oil and Gas industry, leaks are a real concern.

    By Opgal Optronic Industries Ltd. Distributor in MASSACHUSETTS (USA).

  • Gas Detection and Analysis Equipment for Chemical and Petrochemical

    In a complex petrochemical facility there may be many thousands of potential leaks paths. Some may be leaking but most will not. Using an infrared Gas Detection camera allows the user to examine many potential leaks sources in a short time and from a distance. The EPA acknowledged gas imaging cameras, such as Opgal’s EyeCGas®, as an approved Leak Detection and Repair (LDAR) Method 21 alternate work practice (AWP).

    By Opgal Optronic Industries Ltd. Distributor in MASSACHUSETTS (USA).

  • Premium

    Open path ambient air quality monitoring

    Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Perimeter Ambient Air Monitoring

    Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling hardware

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you