Leak Detection System Applications on Environmental XPRT

Premium

Gas analysis & monitoring system for leak searching

Many chemical compounds and gas are invisible to the naked eye. But there are many companies that make intensive use both during and after the production process. The manner and frequency with which companies are required to monitor, document, report and rectify any escape of volatile gaseous compounds are established by regulations extremely rigid. The technology most widely used is the “Imaging Camera” or “sniffer technology.” “When we look for gas leaks, check all systems in places that may or may not have been previously identified. These controls are carried out regularly and are very important after a shutdown.

By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

Leak Detection for Gas Pipelines

GasFinderFC can be configured with a customized probe and GPS system, and mounted in a vehicle or helicopter, to enable rapid, unambiguous detection and quantification of pipeline leaks.

By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

Premium

Methane gas leak detection

Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal`s EyeC Gas Thermal Imager for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in mitigating and reducing fugitive emissions of methane gas.

By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

Premium

SF6 Leak Detection

Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use. The system is able to measure the total concentration of the SF6 gas in an enclosed area, where the switchgear (or other SF6 filled equipment) is tested. Although only the total amount leaked is required by today’s standards, it is also advantageous to be able to pin point the leaks. This makes it easier to improve the integrity of the equipment. The SF6 Leak Detector system meets all of requirements for confined area such as substation Monitoring.

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

Smoke generator device for leak testing & building envelope testing

Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a `leaky` building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the leak. After Concept developed a bespoke system for their aircraft testing requirements, a spokesperson for the RAF commented: `The use of smoke as a means by which to detect cabin pressurisation leaks has been shown to be extremely effective and is unquestionably superior to any alternative detection method used to date!`

By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

Premium

PEHD membrane sealing systems for retrofitting in existing landfill site

It is also possible to retrofit a monitoring system in existing surface sealing liners without impairing the synthetic liner sheet or the immediately adjacent functional layers. For this purpose, cable trenches must be dug in the recultivation layer above the drainage layer. The detection cables are then laid in these trenches.

By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

Gas Monitoring and Leak Detection in Underwater Application for the Offshore Oil and Gas

With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific environment and further engaged in long term co-operation with universities and institutions, the company has been involved in several oil and gas projects, piloting the use of point sensors for continuous monitoring of gas leakages.

By Franatech GmbH based in Lüneburg, GERMANY.

End Point Detection

Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole, 300 amu mass range is standard. Differentially Pumped Manifold With Mounting Flange to Process Chamber. Ion Optics with Energy Analyser and integral ioniser. Penning Gauge and interlocks to provide over pressure protection. Data System with integration to the process tool. Stability (less than ±0.5% height variation over 24 h). MASsoft control via RS232, RS485 or Ethernet LAN. Programmable DDE, Parallel Digital I / O, RS232 Scripting Communication

By Hiden Analytical based in Warrington, UNITED KINGDOM.

Kytola Oilan A4 for Paper Machine Circulating Lube Systems

Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

By Kytola Instruments Oy based in Muurame, FINLAND.

Premium

Gas monitoring instruments and systems for phosgene monitoring

Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. The measurement technology has high specificity, may be operated continuously, and has a fast response time.

By Gasmet Technologies Oy based in Helsinki, FINLAND.

Premium

Fence-Line Monitoring of Fugitive Emissions

The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

By Opsis AB based in Furulund, SWEDEN.

Premium

Ambient air quality monitoring solutions for fence-line monitoring

The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

By Opsis AB based in Furulund, SWEDEN.

Water Data Management Solution for Irrigation Sector

Monitor and report the flow in your irrigation system. As a manager of an irrigation district, farmer, or city operations manager, a KISTERS solution provides an effective tool for easily managing, analyzing and reporting on irrigation activities. Even use it to calculate pump efficiencies, leak detection, water balances and monitor water supply contracts!

By KISTERS AG based in Aachen, GERMANY.

Dye Tracing

Monitoring the dilution and movement of a tracer introduced into the water column provides an excellent means of determining the path that may be followed by a discharge and the rate at which dilution is likely to take place. Fluorescent dyes such as Rhodamine, Fluorescein or Agma are the most frequently used tracers for such investigations. Chelsea Technologies has been providing dye tracing systems for over 30 years. Typical applications include sub-sea pipeline leak detection, pollution studies, natural water flow analysis (rivers, lakes, ocean currents, cave water flows, groundwater filtration etc), sewer and storm water drainage analysis. The Chelsea systems can be configured for a wide variety of tracers, are highly sensitive, robust, and deliver real-time data. They can be moored, profiled, towed or affixed to ROV / AUV platforms.

By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Subscribe to our eBulletins

Add Supplier Profile