Only show results in Virginia? Ok

lighting system Applications

  • Street Lighting

    Greenshine street lighting system is used to provide efficient lighting for highways, main roads, avenues, main urban streets, and other applications that need high intensity of lighting at night. Our modern solar street lights are using LED light fixtures as lighting sources. They can provide an excellent and reliable source of lighting while consuming a lot less electricity. Thus, our solar street lights battery will last longer. Moreover, LEDs provide better brightness than any other light bulb and divide evenly the light within its area. Greenshine provides system that meet the standard lighting requirements for several public area, while avoiding the cost of installation of standard grid-powered lights. Our solar street lights have a smart power mode which gives the battery up to 6 days autonomy. Greenshine has more than 10 years experience in developing solar lighting system.

    By Greenshine New Energy LLC based in Irvine, CALIFORNIA (USA).

  • UAE Solar Street Lighting

    Solar Street Lighting, The new Solar Street Lighting Systems available are state of the art and come with new and creative designs whilst maintaining the highest standards in manufacturing:- Robust, Solar PV Tube Warranties, Electronic Management Warranties, Battery Manufacturers Warranties, Solar PV Modules is vertically integrated within the Poles, Monocrystalline Silicon Wafer PV Construction, Solar Stand Alone Solutions, 7 Day Battery Back Up Power, Full Communication between Solar lights and Service Centre,

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • Chromatography systems for petrochemical industries

    The measurement of permanent gases, light hydrocarbons, sulfur compouds etc. in petrochemicals is important to petrochemical industry. Dikma offers a full range of products to measure these basic parameters.

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA).

  • Patented Waste Water Recovery System for Marine Refinishing Industry

    Due to recent expansion of EPA regulations regarding discharge of water containing contaminants, owners of boats and marinas have had to heighten their awareness regarding waste water containment. If caught discharging any contaminated water overboard, even an ounce or less of light oil mixed with bilge water will produce a visible sheen on the ground or on the water. This is identified by the EPA as a reportable discharge, of which large fines are possible including clean-up costs, and even criminal prosecution when flagrant violations are detected. The GEOMAT Waste Water containment system can be customized to fit any size marine application such as refinishing, marine detailing, and waste disposal.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Premium

    Gas monitoring instruments and systems for titanium dioxide

    Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic product.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Industrial shredders system for metal shredding sector

    Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    MPP water purification systems for groundwater remediation application

    Toxic hydrocarbons in groundwater can be found dissolved in water diffused over the area. At higher concentrations they can be present as DNAPLs (dense non-aqueous-phase liquids) or LNAPLS (light non-aqueous-phase liquids) creating an enduring source of toxic contaminant supply to the water phase.

  • Premium

    Shredding shipboard food waste

    Solution for shredding of shipboard light materials. Special feeding safety system. Output size waste less than 25 mm. Shredder complaining with MARPOL 73/78 - Annex V requirements.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Seawater Biotoxicity monitoring to protect the coastal waters of Italy

    The recorded death of fish in the river that flows out of the industrial zone of Scarlino has created the need of the installation of a biological alarm system. The decision was made to work with an automatic system, iTOXcontrol created by microLAN-The Netherlands represented in Italy by Ecotox Lds, which uses marine bacteria. The system compares the values of the light emission from these organisms at the entrance and exit of the canal, generating alarms in the presence of toxic substances.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Coastal & Nearshore

    Coastal & Nearshore For coastal and nearshore use DESMI provides the well known Ro-Boom product but in smaller sizes whilst maintaining the integrity of the larger product offerings. Alternatively, you may want to consider SPI or a lighter weight boom if there are deployment and recovery considerations or restrictions. Under these circumstances, the Troilboom AF (Air Filled) offers a light weight rapid response solution. It is manufactured as standard in bright orange polyurethane fabric offering durability and strength. Top tension wires are also available to enhance performance. A wide range of combination skimmers have been developed for the coastal environment. These include weir, brush, disc and belt recovery systems with on-board pumps. This results in systems being able to recover a wide range of oils including emulsions and weathered compounds. An example of this is the Terminator skimmer system.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Recycling and processing of WEEE

    Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    High brightness LED (HBLED) for energy/environment sector

    We are playing an important role in the manufacture of HBLEDs, enabling huge changes in the global lighting industry. Our systems are used by a number of leading HBLED manufacturers providing market leading device performance and driving down cost of ownership. They are also used in the manufacture of other light emitting technologies e.g. OLEDs providing process solutions from R&D to full scale production.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Marine monitoring solutions for the SO2/CO2/NOx monitoring

    Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR absorption, approved reference methods.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Harden Shredding Technology for Metal-processing Industry

    Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight. Harden scrap metal shredders are perfect parallel to shearing machines for volume reduction, hence qualifying the material as shovelable, but are also applicable upstream of the hammer mills, facilitating the work in terms of safety, wear and electricity consumption. The main fields of application are: • Light waste collection • Collection in packages • Unmodified or packaged automobiles (including with engine) • Rolling mill trimmings • Sheet metal • Oversized metal items (cabinets, etc.)

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Ultraviolet Disinfection for Oil & Gas Applications

    The process of disinfecting water with UV light is a proven technology for drinking and process water in many industries, however the high standards required by the offshore industry commanded the disinfection systems to be engineered way beyond the normal specification of many manufacturers` As the market leader for offshore UV systems, atg UV technology UV systems are used in a number of key areas in the offshore industry:- atg UV has provided UV systems to treat drinking water, waste water, hydraulic stimulation fluids (well injection and unconventional gas fracking) and SRB reduction for pipeline hydrotesting and corrosian protection. These systems are often supplied as skid mounted duty/standby packages, or containerised solutions and are designed to individual client specifications. Clients include: Shell, BP, Total, Statoil, AKER, British Gas, Veolia, Halliburton, Baker Hughes, BJ Services, ODE, Ormandy, SLP and Petrobrass.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Laser detection solutions for environmental monitoring

    LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And Ranging).

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Wind Energy Meteorology

    As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light systems.

    By Biral - Bristol Industrial & Research Associates Ltd based in Portishead, UNITED KINGDOM.

  • Aviation Meteorology

    SWS and VPF sensors are used in airports throughout the world as part of aviation ground control and meteorological monitoring systems. Our visibility and ambient light sensors form the core of Runway Visual Range monitoring systems used to control the safe landing of aircraft in reduced visibility conditions. Our present weather sensors provide automated precipitation classification and monitoring that forms a vital part of the METAR signals broadcast to aircraft in the airport vicinity. The detection and reporting of thunderstorms is important in the aviation industry supporting both the safety of ground operations and the provision of meteorological data to aircraft and forecasting authorities. Our BTD-300 Thunderstorm Detector has been developed to be compliant with FAA regulations for lightning detection systems used at airfields.

    By Biral - Bristol Industrial & Research Associates Ltd based in Portishead, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you