Only show results available in Virginia? Ok

liner system Applications

  • Premium

    PEHD membrane sealing systems for landfill surface liners

    Unlike base liners, surface liners are not buried at some point under many metres of waste and instead are usually protected over the course of many years only by a 1-metre thick mineral layer. As a result, there can be uncertainty about the integrity of their leak-proofing characteristics, particularly if the land is subsequently used for other purposes; however, at the same time, repairs are also possible at reasonable cost if the location of any damage can be established.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Premium

    PEHD membrane sealing systems for landfill base liners

    There are several phases of preparation of landfill base liners, starting with the positioning of the membrane, until these can be covered with several metres of refuse. These membranes may be damaged during preparation, but can also be inspected and repaired. It is advisable to undertake inspections at regular intervals.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Premium

    PEHD membrane sealing systems for retrofitting in existing landfill site

    It is also possible to retrofit a monitoring system in existing surface sealing liners without impairing the synthetic liner sheet or the immediately adjacent functional layers. For this purpose, cable trenches must be dug in the recultivation layer above the drainage layer. The detection cables are then laid in these trenches.

    By ELD Environmental Leak Detection GmbH based in Berlin, GERMANY.

  • Premium

    Ultraviolet Disinfection for Marine & Shipping

    atg UV Technology are market leaders in the offshore and marine industry and have supplied Ultraviolet disinfection systems to a number of key clients in a range of marine applications including cruise liners, luxury pleasure craft and transport freighters around the world. Our leading UV systems are compact in design, allowing for ease of installation into restricted spaces, and provide protection against microorganisms, bacteria, and viruses without the use of chemicals. This leads to an environmentally friendly solution to the challenges faced by marine engineers worldwide. Applications include: - Waste Water Discharges Ballast Water Drinking Water Swimming Pools Process Water

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Coal Combustion Residuals Disposal for Power Plants

    Coal combustion residuals (CCR) are generated during the power generation process and can include fly ash, bottom ash, boilerslag, and flue gas desulfurization (FGD) residuals. CCRs contain trace concentrations of heavy metals and therefore cannot be dumped or stored where rainwater can leach the metals. Liner systems can be used to contain the coal combustion by-products and protect them from leaching into the environment.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Protection and Filtration for Industry and waste areas

    Geotextiles enhance both drainage and lining systems in environmental applications. In the large industry of waste containment, geotextiles are used to protect and cushion landfill liners and landfill capping systems, and they are used as critical components of geocomposites such as geocomposite drains and geosynthetic clay liners. Heavyweight, needle-punched nonwovens are use as cushion/protection for landfill and pond liners to keep adjacent stones in overlying or underlying drainage layers from puncturing the impermeable liner.

    By Mattex Geosynthetics based in Dubai, UNITED ARAB EMIRATES.

  • Geosynthetic Lining for Mining Industry

    Geosynthetics are used in construction of various components of modern mining facilities, including process solution ponds, heap leach pads, stormwater containment, wastewater treatment ponds and closures. Harsh environmental conditions provide a challenge to engineers designing the projects. In addition, increasing environmental and cost pressures are requiring lining systems to achieve greater performance levels than ever. GCLs are rapidly becoming a desired component of mining liner systems because of the benefits they provide in cost effective construction, environmental compliance and process solution leak reduction. In weather-sensitive remote or high-altitude locations, GCLs offer far greater installation efficiencies than compacted clay.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Landfill lining

    GCLs have become the gold standard clay component of composite lining systems used in industrial, hazardous and municipal solid waste landfills. Used alone or in combination with a geomembrane in a composite cover system, GCLs provide significantly lower permeability, improved ease of installation, an increased amount of usable space. In many cases GCLs are more cost-effective than traditional compacted clay liners. GCLs are also not subject to deterioration from differential settlement and freeze-thaw cycles, which can damage traditional compacted clay liners. Important design considerations for GCLs in landfill caps include confining pressure, and potential for ion exchange and desiccation.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Construction of Containment Structures

    Manufactured synthetic lining products have allowed for efficient design and construction of containment structures such as ponds, lagoons, landfills, tanks and secondary spill containment facilities, including vapour management systems. Because of the wide variety of project conditions and materials being contained and with so many liner types to choose from, the design and selection of the appropriate lining materials can be a complex task.

    With over 25 years of experience in geomembrane containment technology, Nilex offers design assistance, fabrication, installation and construction services for containment applications. The Nilex containment technology process involves compatibility testing and the consideration of facility design and climatic factors.

    Nilex professionals will work with the owner, engineering consultant and the general contractor to ensure the optimum design with the most efficient and cost-effective installation for the containment application.

    Learn more about our products and services for Primary Containment, Secondary Containment,Tank Lining, Vapour Management Systems, Installation Services and Covers.

    By Nilex based in Edmonton, ALBERTA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you