liquid liquid separation Applications in USA

  • Liquid/solid separation for mining

    PHOENIX technologies for liquid/solid separation has led the way in mining and aggregates & industrial minerals since 1984

    By PHOENIX Process Equipment Co. based in Louisville, KENTUCKY (USA).

  • Industrial Meshes for Solid-Liquid-Filtration

    SolidWEAVE stainless steel filter media for solid-liquid-filtration are the basis for a wide range of industrial process steps. They are used successfully in various filtration devices like cartridge filters, drum filters, vertical pressure leaf filters or centrifuges.

    By GKD - Gebr. Kufferath AG Office in Cambridge, MARYLAND (USA).

  • High performance solid-liquid separation system for deepwell industry

    Deepwell facilities for the disposal of plant waste streams often employ nominally rated spray spun elements, bags, diatomaceous earth filters, and various other types of conventional filtration technology. These labor intensive systems provide protection of the well from occlusion by suspended particle matter, albeit often with high operational cost and limited assurance of reliable fluid quality. The ongoing challenge facing a deepwell system is the requirement that the formation into which the waste is being pumped must maintain its porous nature in order to operate effectively. Therefore, reliable, effective filtration to capture particles with the potential to plug the formation is critical. Pentair Porous Media’s proven advanced separation technologies have been employed in deepwell disposal systems to enhance system reliability, assure well integrity and lower operating costs and system maintenance.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Magnetic Separator

    Stanford Magnets provide high quality magnetic separator used to extract and remove ferromagnetic materials from liquid or solid mixtures.

    By Stanford Magnets based in Irvine, CALIFORNIA (USA).

  • High performance filtration & separation system for amine

    There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the feed stream, or generated within it as a result of the chemistry of the system. These contaminants are typically addressed by means of particle filters and carbon adsorption.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance separation system for glycol dehydration

    Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in industry.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Separation solutions for oil & gas industry

    Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • High performance separation system for fuel gas streams

    Fuel Gas Streams are frequently contaminated with liquid aerosols. The liquid exists as a stable and persistent “smoke” in the gas stream. The liquid contaminant can enter the gas stream through any one of a variety of events including – phase separation and condensation, compressor lube-oils from compression, chemical addition to pipelines (including corrosion inhibitors), and entrainment from overheads of contact towers.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Natural gas gathering system for inlet gas separation

    Natural gas gathering systems deliver large volumes of gas via pipleline to the central inlet of the gas processing facility. Removal of solid contaminants and free liquids present in the inlet gas is critical to the downstream process. Iron oxides, iron sulfides, dirt and other deformable particles can flow into the processing system. Effective removal of these contaminants is needed to prevent fouling. Pentair Porous Media technologies will help with a clean, natural gas feed, reducing upsets and associated downtime and increase productivity, lowering capital costs with fewer change-outs.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Activated Carbon Filtration for the Water Filtration Industry

    General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.


    By General Carbon Corp. based in Paterson, NEW JERSEY (USA).

  • Premium

    Hydrogen sulfide removal in sludge management

    In the treatment of sanitary sewage, bio-solids are separated from the liquid. These bio-solids are concentrated and dewatered using filter presses, centrifuges, or other devices. Hydrogen sulfide and mercaptans are released during the dewatering operation.  Carus permanganates react quickly and produce immediate results for hydrogen sulfide removal in order to provide a safe, odor free environment and minimize corrosion due to sulfides.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Filtration systems & solutions for biosciences and scientific industry

    The scientific community and in particular for that of the life science industries such as the medical, pharmaceutical  and healthcare, have a growing need for superior technologies and products in filtration, separation, purification, aeration and liquid transfer. The range of BioVyon materials and applications are continuously expanding, driven by new market requirements and available to both OEM and end user customers. Applications include separation or filtration for healthcare, medical and pharmaceutical products, shut off valves for catheters, diagnostic wick and sample preparation devices.

    By Porvair Filtration Group Office in Ashland, VIRGINIA (USA).

  • Removal of impurities for food and beverage industry

    As a world leader in purification, separation, and concentration technologies, Calgon Carbon offers one of the largest selections of products and services in the food and beverage industry. By removing impurities such as color and odor from food liquids, syrups (e.g. sucrose, dextrose, glucose), organic acids, amino acids, vitamins, beverage alcohols, and glycerin, our products are vital to the production of high-quality, stable products.

    By Calgon Carbon Corporation based in Moon Township, PENNSYLVANIA (USA).

  • Oil skimmers for petro chemical industry

    The Mop type Oil Skimmer has many submissions in refinery plants. Some applications are comprised of cooling ponds, waste water, storage tanks etc. Due to its flexibility the Mop Skimmer can be functional to nearly any application during a refining plant where the fluctuating liquids and water needs separation. Ambar is experienced with explosion proof systems specifically designed for the Petro Chemical waste water applications.

    By Ambar Oil Skimmers based in Westwego, LOUISIANA (USA).

  • Measurement and control systems for the Indicating the level - mechanically

    Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring station because of their special design and the intense LED illumination. With indirect level gauges, the water level is transmitted by a magnetic system to a display panel on the outside of a pipe.

    By IGEMA GmbH Office in Miami, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you